Fuel Injectors Flow Test Results

[BOOSTD]

Flow chart was @ 40psi pressure

Inj Full flow Pulsed flow

1 756 224

2 720 212

3 756 206

4 756 208

5 780 220

6 756 206

No sure what is an acceptable varience

[skylinecouple]

1% is exceptable .

[BOOSTD]

hmmmn ok....

[Adriano]

1% is exceptable .

What he said, im assuming that the numbers are two different tests, however the injectors didnt flow the same relatively?ie the ones that flowed less in the first test didnt in the second? Are you sure the wiring plugs were secure on the injectors?

[GTRgeoff]

The results I get are

% different

1 756 0

2 720 -4.761904762

3 756 0

4 756 0

5 780 3.174603175

6 756 0

Average 754

% different

1 224 5.33

2 212 -0.31

3 206 -3.13

4 208 -2.19

5 220 3.45

6 206 -3.13

Average 212.67

So probably best to think twice about using them. 700cc injestors are meant for some decent power so if they are working fairly hard then the probability of failure is increased.

[BOOSTD]

cheers guys

[RB30-POWER]

you usually run the low flowing ones back through the ultra sonic cleaner again to try and balance them out.

im unsure how much % tolerance they have from factory...