Jump to content
SAU Community

jp spec s15 vs aus spec s15

Guest SXU29T

By Guest SXU29T,
in Engines & Forced Induction

 Share

Recommended Posts

cameron Mentor

cameron

Posted
Posted
That would explain why a slightly moded jap spec will spank an aussie version with the same mods. however start changin the oz spec engine managment and u have the identical car!

Don't forget guys with the aus version S15 if you go for an aftermarket ecu,

Eg: Apexi Power FC you have to switch wire 30/31 on ecu wiring harness to run the fuel pump & i think the CAS.

:D

marchGTR Collaborator

marchGTR

Posted
Posted

jap spec has bigger injectors, and a 6 bolt roller bearing turbo compared to the aussie 5 bolt. the steering wheels are nicer in the jap spec, the exhaust in both is very simiar and from my experience the difference in boost is minimal if at all different. ice performance have told me that the most they are able to speeze out of the aussie spec is about 180rwkw and jap spec more like 215rwkw. I have witnessed first hand two of my freinds going at it. one had a stock japspec the other an aussie spec with catback exhaust, and the japspec raped it everytime

  • 14 years later...
Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

Australia is also hotter and has shitter fuel, so the ADM version has less timing in it. Another reason why you see stock turbo JDM S15 crack ring lands when kids ram in 1 bar of boost with the stock ECU/tune and go to Mexico.

admS15 Grand Master

admS15

Posted
Posted

Jdm makes 184kw@fly. Adm makes 147kw@fly.

As noted above Jdm has more timing advance.

Jdm has digital climate control, adm is analogue.

The Jdm's imported where the pre Adm years so i think that was 99 and maybe early 2000.

I wouldn't worry about which one, just buy the best condition example you find. Personally i favour the Adm version as there is less chance of the odometer being wound back and less chance of rust due to climate conditions. They are things to definitely check for on either model.

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted
7 minutes ago, r32-25t said:

Aussie versions of cars also end up with factory immobilizors where the Japanese ones won’t 

Then you install a JDM ECU, swap the 2x CAS pins and 1x fuel trigger and off you go - or BYO Haltech/Link/MoTec/ etc.

Poor effort on the NATS lol.

The Bogan Grand Master

The Bogan

Posted
Posted
1 hour ago, admS15 said:

Jdm makes 184kw@fly. Adm makes 147kw@fly.

As noted above Jdm has more timing advance.

Jdm has digital climate control, adm is analogue.

The Jdm's imported where the pre Adm years so i think that was 99 and maybe early 2000.

I wouldn't worry about which one, just buy the best condition example you find. Personally i favour the Adm version as there is less chance of the odometer being wound back and less chance of rust due to climate conditions. They are things to definitely check for on either model.

My stock NA 86 makes more @fw than the ADM S15.

I don't want to talk anymore about this though......

 

I like my 86, but I lay awake at night thinking of what could have been.......

 

 

 

tumblr_mhzg9zdhDv1rv8zdao1_500.gif

admS15 Grand Master

admS15

Posted
Posted
My stock NA 86 makes more @fw than the ADM S15.
I don't want to talk anymore about this though......
 
I like my 86, but I lay awake at night thinking of what could have been.......
 
 
 
tumblr_mhzg9zdhDv1rv8zdao1_500.gif.7f98fd2241950a639881384e5e19a808.gif
Yep, except an s15 can make 200rwkw tuned and around 220rwkw on e85.
  • Sad 1
The Bogan Grand Master

The Bogan

Posted
Posted
5 hours ago, admS15 said:
5 hours ago, mlr said:
My stock NA 86 makes more @fw than the ADM S15.
I don't want to talk anymore about this though......
 
I like my 86, but I lay awake at night thinking of what could have been.......
 
 
 
tumblr_mhzg9zdhDv1rv8zdao1_500.gif.7f98fd2241950a639881384e5e19a808.gif

Yep, except an s15 can make 200rwkw tuned and around 220rwkw on e85.

As stated, I don't want to talk about it.

 

Sadly I missed a ultra low km one owner ADM when I was looking.

 

The thing was like new, stored, it had 5000km on it if I recall right, it sold for $28k I believe, which I would have paid.

It was red, a yellow one, exact same condition, owned by the same guy sold about 2 months prior.

I doubt I will ever see one in that condition again.

Bugger

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • robbo_rb180
      Neil's R33 Gts-t Build

      By robbo_rb180 · Posted

      AFM looks to be a z32 The injectors maybe old Nismo 555cc The turbo tag when looked up seems to be a gt2871 , imagine it would have the bigger rear housing .82 all look like the mid 00's mods when he started building it up. Vac hose seems right but would need to see a diagram. Great work going up there and sorting it out, be a good club car for someone wanting a good reliable rig.  I know I would like to have it but no space and too many other race cars at the moment.
    • Kyer32
      R32 gtst speedo out by 10kph

      By Kyer32 · Posted

      Heys guys I got a r32 gtst speedo is out by 10kph seems the faster I go the more it be out  just seeing if anyone else had to problem and knows how to fix it 
    • Duncan
      R32 GTR EV? The leaf of the Godzilla's!

      By Duncan · Posted

      I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
×
×
  • Create New...