Jump to content
SAU Community

Recommended Posts

Hi everyone, just bought an exhaust. I paid for it thinking that it was 4" in diametre, and titanium (as described by seller).

It turns out though that it's only 3.5" and now I'm strating to wonder if it is actually titanium as well.

So, does anyone have photos of titanium exhausts? Or could you descripe it's apprearance??

As you can see from the pics, this one is shiny and has a yellowish tinge to it. I've heard that stainless goes yellow over time, but I really don't know for sure. I've always been under the impression that titanium is dark and shiny, but maybe there are differnt types....

I understand that titanium is supposed to be light also, this particular system (with cat pipe) weighed 16kg's accodring to the freighting company. Does anyone know how much their stainless catback system weighs? Maybe we can do a rough comparison/estimation..

Also whats the go with welding different types of metal together (ie stainless and titanium)? Because this has a stainless steel muffler (as described). I was under the impression that titanium welding was very tricky... But I really don't know for sure....

Cheers.

Fullpipe.jpg

DSC01534.jpg

Link to comment
https://www.sau.com.au/forums/topic/147327-is-this-really-a-titanium-exhaust/
Share on other sites

it's stainless, no doubt about it. looks like quite a good exhaust though, but deffo not titanium. if it were titanium it would weigh very, little and be a very different colour.

Still a bloody nice looking exhaust even if it's not 4" or Titanium....

On the topic of Titanium Exhausts.... anyone know a supplier in Australia for Reinhard? I love the "trumpet" on the Amuse R34GTR :laugh:

there is somone advertising reinhard in HPI.

btw reinhard hydrich was one of the biggest mass murders of all time as one of hitlers right hand men. i have nfi why they named and exhaust company after him... wierd co-incidence i guess.

how loud is it though? :laugh:

pretty quiet actually it's not the single straight through it's a twin 2.5" splitting off at the cat. It's had a bit of a scrapping though, wonder who can/how you go about titanium repair. Not that anyone would notice and there are no exhaust leaks.

haha! you outbid me on that exhaust...:laugh: I really wanted it but got to $400 and started looking closley and realised it wasn't titanium. bugger about it being 3.5 not 4.

Still looks like an excellent exhaust. also comes with the nice noise control valve.

still, yiu wouldn't have got a better exhaust for the same price. I just paid $700 for a xforce stainless 3" system I would have piad that much for the one you bought looking back on it :laugh:

Still, complain to the seller as it was advertised as titanium and 4" make him refund you some dollars.

how heavy is it mate?

u should be able to lift it with 3 fingers

few kilos at most, I was surprised how light it is.

jeez where'd you get yours from?

LTHLRB, believe he wanted something louder.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • In a few years from now, you'll regret that. It'll eat away at you, knowing the truth of the ugly hiding beneath the beautiful exterior... 😛
    • I don't think the G2 profile is particularly dangerous for the engine per se, more just are you actually ok with the turbo lag trade-offs? If the answer is yes then go for it. I personally don't think I'd be ok with it because I spend so much time at lower RPMs and I really enjoy the feeling of being able to stay in 5th gear on the highway and just roll into the throttle to get boost. Or staying in 3rd gear on "gentle canyon cruises" without feeling the turbo lag too badly. The 525 pump should be able to run flat out on factory lines but I would bet the pressure drop from pump to regulator is quite impressive. I don't know how much it would be exactly but I've seen figures like 30 psi thrown around.
    • It's interesting seeing everyone talk about what level of risk they are happy to tolerate.  Building a GTR always has a level of risk, you could be that lucky guy that drops 20k on the engine build alone and still has the thing go pop on the dyno. Life is fun like that.  The way I see it, the thing is a toy to be enjoyed. I'd be happy to turn up the power on stock motor and limit the risk with sensible tuning and engine protection. If it still goes pop, it is what it is. The car isn't a daily driver so it can happily sit while a plan is made to sort it out.  Given this thing will be a street car only, I really feel it's worth the (relatively small if managed well) risk to turn the power up to around 350KW on e85.  I don't think anyone getting into the skyline game now is doing it out of logic. Surely it is a purely emotional decision so I'm not sure how important it is to think about the engine build logically. The heart wants what it wants.  @joshuaho96 little note for Josh, I run my 525 pump flat out all the time and through the factory lines without any issues. (excluding the melting connectors, that's sorted now. we'll pretend it never happened lol)
    • But the Nexus S3 is very expensive and won't be as purpose-built for the application as a separate electronic boost controller :^) More seriously my pet issue here would be that the Walbro 525 running at 100% duty cycle is going to require more FPR than the stock setup can handle. I'm also pretty sure from what I've seen elsewhere you might want to slow down the pump regardless unless you're going to come up with some way of upsizing the fuel lines coming from the fuel tank. Factory 8mm fuel line doesn't actually flow very much if you want to keep pressure drop down between the fuel pump outlet and FPR. If you really want to "keep it simple" I would run only as much pump as you need and source a fuel pump controller to slow down the pump in the vain hope of being able to run stock-style FPRs which are pretty dinky. Or just use the HICAS lines and it should be mostly fine. OP should also really think hard about what profile they'd want out of the turbo. My pet choice here would be the G1 profile rather than anything higher power but YMMV. I already think ~stock turbo lag is pretty bad so I don't want to make it worse. In "gentle canyon cruising" I found that I spent a lot of time around 4-4.5k RPM. I also recommend DIYing labor if you're detail-oriented enough. Costs are high for labor + if you do it yourself you can be your own quality control.
    • GTSBoy is again on the money. My actual advice? Sell the car. (really). For what it's worth as is, you can sidegrade into something much better. If you care about function then this is the actual move. If you want a Skyline to perform, set aside about $100K to do it. This is NOT a typo. You will see right away these are two very different mindsets. Realistically we're talking full restomod for any Skyline still kicking around. Have an honest think about which one you are.. and what you want to do, and how much you want to invest in this (with no return).
×
×
  • Create New...