Jump to content
SAU Community

Recommended Posts

You can also drop a 350chev in them :P

Hah, a friend of mine at uni had one and they're insanely tough.

Yeah, I used to have one too. First car I ever drove. Taught me everything I need to know about driving (which explains a lot).

I checked the VSI's for modified cars when I had it, and with the car's kerb weight you can legally fit a 5.0L FI engine (Holden 308 twin turbo, anyone?) or a 5.7L NA (350 Chev, LS1, etc). Got sleeper?

And mine was tough too. I drove it hard, and drove it into a few things, and the thing just kept on running. I also once had some guy in an EA Falcon mistake his throttle pedal for his brake and shunt into the back of me. The Falcon's front bar was smashed, radiator mounts broken, cracked headlights.

My Volvo's rear bumper was scuffed and marked with the Falcon's paint, and with a KFC moist towelette I got rid of that.

  • Replies 182
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Last lunatic I knew with a 240 coupe threw a 350 in his and used to drive it all over the place getting whacked on by Sydney traffic for a few years, sick bastard also used to put little flags down the front quarter panel on the drivers side.

They where not for drags won... they where for cars and bikes the damn thing had run into it, killed and kept going :laugh:

About the only thing comparable in 'sedan' toughness I can think of off the top of my head is the old W123 mercedes chassis, those things just keep on going for a half a million miles, hit with clusterbombs, antipersonel mines, sprayed down with 7.62mm rounds and keep on rollin', ride of choice for 3rd world gangstas! :)

You could probably have a beach party and V8 under the hood with one of them!

Silver- colour code aka as 'Battleship Grey'

Burnt Orange- colour code aka as 'Felony Orange'

White- colour code aka as 'Crusader of Mass Justice White'

Cola Brown- colour code aka as 'Bikers Pants Brown'

Red - colour code aka as 'Slaughterhouse Red'

Beige - colour code aka as 'Suburban Ninja Special White'

Black- colour code aka as 'Mall Gangster Black' fairly rare though this one.

Volvo is also latin for "I Roll"

Edited by MK2
Ps. it won't be another skyline unless it's a gts-r

Bad luck about the car... if it was your fault you could kinda say "ok, fair enough".... but alas, not to be.

However, you know whats required :(

SERTY WAN... NUMBA WAN!!!!!!!!!!1

yeah maybe not!!!

although they are the car of the moment I hear!!!!

someone find me a silvia damn it!!!!!

http://www.skylinesaustralia.com/forums/in...howtopic=150378

I saw that one yesterday, and since then i see you've posted in there :P

damn i just spotted this thread.. the worst things allways happen to the nicest people... It could happen to anyone :P

my mate wrote off my other mates 180sx in december as well... they could not find a replacement car so they converted the sr into a 910 blue bird.

What model silvia you after??

S13?

Turbo?

N/A?

Ive got nothing to do at work, so i might as well help lol :P

yeah s13 silvia or 180 ...

who cares.. as long as it's cheap and no major accidents! lol

can be a auto ca18de for all i care! lol.

damn i just spotted this thread.. the worst things allways happen to the nicest people... It could happen to anyone :D

my mate wrote off my other mates 180sx in december as well... they could not find a replacement car so they converted the sr into a 910 blue bird.

ewwwww

lol

they are heaps expensive for what they are.

ideally I'm just looknig for a shell, but seeing as there aren't any, I'm looking for a car that's cheap as chips so I can tear everything out of it and put my gear in!

http://www.carsales.com.au/used-cars/priva...te_DateTime%7C1 4ly sik bro

not that cheap but you could probably get it cheaper off them without stereo, wheels, etc and then you have a shiny blue paint job to look at

how about a datsun 1600? a mate of mine has one that he would be willing to swap for a set of nismo 740cc injectors for a s15 ($500 from nengun)

they are heaps expensive for what they are.

ideally I'm just looknig for a shell, but seeing as there aren't any, I'm looking for a car that's cheap as chips so I can tear everything out of it and put my gear in!

how about a datsun 1600? a mate of mine has one that he would be willing to swap for a set of nismo 740cc injectors for a s15 ($500 from nengun)

no i don't want aids, but thanks for asking!!!!

hahaha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...