Jump to content
SAU Community

Replacing Ignition Barrel. Can I Modify Lock To Fit Existing Key?


Recommended Posts

Hi Guys...

My GTR got broken into about a week ago and they had a good go at stealing it.

I've gotten a security guy to fix up the electrics, and I've sourced most of the plastics they broke and even a new lock/ignition barrel.

However, my question is - can I get a locksmith the adjust the new barrel to fit my existing key?

The reason I ask is that if the ignition barrel isn't adjusted the new key wouldn't match my doors and boot and I'd need 2 different keys... pretty dodgy.

I'm really hoping a locksmith can take care of this, but I have absolutely no idea what's possible.

Also, if you know this much about the locking barrels, I have another question about installing new ones taken off another car. I've sourced an ignition barrel with key from the forsale forums, but what I don't understand is how they can remove them and how I can install them in my car.

I only ask this because the security guy who worked on my car mentioned that when they install the lock barrel, it's installed with special screws that break off once they're attached, so you can't unscrew them.

So how DO people take them off? Drill them out? If that's the case, maybe the only way to get them back on is to either rethread them or use a standard nut/bolt?

Any tips/suggestions are really appreciated.

Thanks!

you should be able to get a barrel to fit the same key, but that would probably mean ordering a new barrel from nissan, or having a locksmith alter the barrel you have sourced. it may end up cheaper to buy the new barrel.

find a locksmith and ask them, or ring nissan. you will probably need your key number from in behind the drivers door trim.

actually, I've done a bit more research and found out it definitely is possible to get the barrel rekeyed to my key and it's also very cheap. Sounds like most locksmiths that handle cars do it.

I just tried one in the city, but they didn't do cars so they gave me the number for a locksmith in Woollahra.

Called them and they quoted $35!

Robinsons Locksmiths - 62 Oxford St, Woollahra - (02) 9363 3985

I'm still interested in any advice regarding removing/refitting the lock barrels if anyone has done this before.

Depending on how damaged your old lock is, if the wafers are still in good nick its an easy job..

I dont know if you already removed your old ( smashed ) lock and alloy housing that goes around the steering shaft. If you did you would have noticed the the way it bolts around the shaft, 2 bolts without heads. Thats the reason they told you, you do the bolts up until the heads break off. When you install the new one you really have to use new bolts with heads that snap .

I don't want to go in to more detail on a public forum ( i don't want to tell would be thieves how to ) so P.M. if you want to know more ..

By the way $35 to change the barrel so your old key fits is very reasonable ..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, that's grim. Something bad has been happening there.
    • Put an endoscope down the hole and saw this. Not quite all around the bore but a good 60% at least. Chin to the chest and towards further disappointments I guess.
    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
    • Excuse me, but 2) does apply 1) Would also apply if you consider how much is spent in the alternatives. Also there's the option of 3), buy one pre-built that you can put your family in (it's me, it's my car)   That said, I went on a ~500km drive the other day. I didn't use anything more adventurous than 3rd/4th gear at about ~3000RPM and 50% throttle and I was going as fast as anyone has any sense doing on a public road, with enough grip to the point where I didn't want to go any faster. I was obviously under the limit of the current car etc etc. MX5 with 2.5 N/A to achieve the same speed would be more fun for any road scenario. Maybe consider cams. I wouldn't boost it. The use case is just not there and it won't actually make the car more enjoyable unless you really do plan on wringing gears from 1st to 3rd (at least) at 100% WOT on a public road to 150+kmh.
    • Great if: 1. You had all of the money for everything else that is required  2. Lived in a country where you could actually do this and drive it legally on the road Sadly, neither applies to me As for the turbo, I am having second thoughts, mainly for engineering/registration legality reasons and insurance  Not saying I've finished doing stupid things that I probably should do to the MX5, but boost, and V8 engine swaps isn't on the cards Strange, but true 
×
×
  • Create New...