Jump to content
SAU Community

Recommended Posts

  • Replies 108
  • Created
  • Last Reply

Top Posters In This Topic

Hey Guys,

I've just put in a set of HKS 2530's into my R33 GTR. I've also got full exhaust, HKS Dumps, Power FC Pro with boost controller, Twin plate clutch. At 1 bar on a Dyno Dynamics 4wd dyno we got 275hp at all 4 wheels. I'm putting in bigger injectors, HKS Cam gears, HKS Type R FMIC and turning the boost up to around 1.4 bar. We are hoping for around the 350 - 375hp at all 4 wheels. Assuming that I can drive it well down the strip on 245/40/18 tyres, is it possible to get into the 11's with this set up??? I'll know in a few weeks, just wondering what everyone's thoughts are?

Cheers

Brett

Originally posted by EVL R33

Hey Guys,

I've just put in a set of HKS 2530's into my R33 GTR.  I've also got full exhaust, HKS Dumps, Power FC Pro with boost controller, Twin plate clutch.  At 1 bar on a Dyno Dynamics 4wd dyno we got 275hp at all 4 wheels.  I'm putting in bigger injectors, HKS Cam gears, HKS Type R FMIC and turning the boost up to around 1.4 bar.  We are hoping for around the 350 - 375hp at all 4 wheels.  Assuming that I can drive it well down the strip on 245/40/18 tyres, is it possible to get into the 11's with this set up???  I'll know in a few weeks,  just wondering what everyone's thoughts are?

Lets put it this way... If you don't run an 11 with all that, you don't deserve to own the car, and have to give it to me :P

Originally posted by EVL R33

Hey Guys,

I've just put in a set of HKS 2530's into my R33 GTR.  I've also got full exhaust, HKS Dumps, Power FC Pro with boost controller, Twin plate clutch.  At 1 bar on a Dyno Dynamics 4wd dyno we got 275hp at all 4 wheels.  I'm putting in bigger injectors, HKS Cam gears, HKS Type R FMIC and turning the boost up to around 1.4 bar.  We are hoping for around the 350 - 375hp at all 4 wheels.  Assuming that I can drive it well down the strip on 245/40/18 tyres, is it possible to get into the 11's with this set up???  I'll know in a few weeks,  just wondering what everyone's thoughts are?

Brett

375 hp equates to around 280kw at the treads. You should be hoping for around the 11.7 mark with that kind of power. The only stopping you are the small tyres your're using. You may want to look at using 255 width tyres rather than 235 if you're on 9" rims. With that much power through 235s you'll be spinning a fair bit through 1st and 2nd, even if you are a 4wd. I was wheel spinning when I had 250rwkw.

Emre has a similar setup to what you have described and he has over 310rwkw at a similar boost level if not less from what I remember. You may want to speak to your tuner as to why you can't get more power than 280Kw at the treads with your setup.

Cheers

Leewah,

I'm running 245's Goodyear Eagle F1 DS-G3's, they are pretty darn sticky so I was hoping they would be enough down the drags too....

310rwkw!!!!!! Thats over 410hp at the wheels. If I'm getting 205kw's at all 4 wheels, what would that be at just the rears?? Do you know how to get an R33 into rear wheel only drive??

We are running the PFC rich at the moment and only using 1 bar as the stock injectors are maxing out already. I might pm emre and see what he has done exactly..

Cheers

Brett

Originally posted by EVL R33

Do you know how to get an R33 into rear wheel only drive??

To get a R33 GTR into RWD, there are a couple things you can do.

The best one is to simply remove the front shaft. With the front shaft out, no power can be transferred to the front wheels.

Another thing you can do is to remove the fuse which is located under the coin holder. This will only work for a couple dyno runs as after awhile the ATTESSA gets confused and goes into a type of limp home mode which puts a constant 10kg to the front which means that your car will come off the dyno if it is only a RWD dyno.

I've now got the HKS TSC and drag controller in the car so I can safely put the car in RWD from the cabin or adjust how much torque I want going to the fronts at anytime.

Originally posted by Leewah

I've now got the HKS TSC and drag controller in the car so I can safely put the car in RWD from the cabin or adjust  how much torque I want going to the fronts at anytime.

Which legend sold you that marvellous piece of electronic wizardry?!?! :):D

I might need that back actually :)

Originally posted by EVL R33

Does taking the front drive shaft off or pulling  the fuse cause any problems??  Is it hard to get the front shaft off (like a quick 5 min job type thing??)

Brett

Pulling the front shaft out is a 10 minute job on a hoist. It involves about 4 bolts at each end of the front shaft. Simply unbolt and let it drop :)

The fuse comes out easily enough once you get the coin holder off which shouldn't be a problem.

The 4WD and HICAS lights may come on but that's just coz the ECU doesn't know how to interpret what it considers as a loss of traction.

And yes Merli, I believe it was you who sold me one of the coolest toys in my car. 375rwkw is a fun in 2WD!!! :D Damn tyre chewing monster....

  • 2 weeks later...

On v specs the drive shafts are it aren't they?

I'm going to have a go next week.Apparantly you have to move the clutch slave cylinder too.

I can't wait for the next drags cos I have a rev speed meter which usually reads 0.3 seconds slow and it is now reading 11.9 and 12.0. I guess I'll have to wait and see.

Since my new pipes have been put on I'm bagging up big time so I guess tyre pressure will be an issue.

How about 0-100 my best is 3.98 but average 4.1

Anyone know how much boost you can run on a virtually stock R32 GTR with following situation:

Stock turbos,

pod filter,

3.5 high flow cat

HKS Super Dragger exhaust,

Single bruss button &

Some werd aftermarket Japanese Boostcontroller.....

Would it be feasible to run more than 16psi? And does anyone know what the power to the wheels on an estimate like this would be?

I think 1.2 bar is the accepted limit that you should be running on stock GTR turbos.

400hp, why don't you bring your car over and we'll give 1.4 bar a go :D

  • 10 months later...

I will :)

My car has about 270kw at the wheels...(stock turbos) with a g-tech my best run is a

4.3 0-100

12.4 1/4 mile

this was with a passenger, wheel/clutch slip and 3/4 tank of fuel... plus its a g-tech no idea how accuriate or non-accuriate it is...

i have adjustable cam gears, full exaust, stock airbox ... running 1 bar boost

I'll be very happy if with this setup i can get a time slip that starts with an 11

My tyres are crap - 245/40/18... falkens can't remember what model but they are pretty low end - came with the car, need to wear them out so i can buy something a bit stickier :)

Tips on launching/shifting with a GTR would be much appreciated ;)

SHould i be trying to shift as quick as possible? or consentrate more on smoothness? should i be keeping the gas down a touch as i shift?

Damn!!! Just got back from calder, 12.00 @114mph......

I want that 11!!!!!!!!!!!!!!!

Oh yeah, stock turbos running 1.1 bar, stock ecu.....

Congratulations dude, that's an awesome effort for stock turbos and stock ecu!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I mean it's probably likely that people overestimate their skills in dialling in a setup and noticing the changes. I had SK shocks and springs, and added heavier springs and got them revalved by Sydney Shocks to suit based upon what I told them I wanted the car to handle like. I got back a completely different feeling set of shocks, which probably (?) feel great on track but holy hell are they rough on tram tracks and the like. Truth be told I doubt I'd be any faster or slower with either setup, or camber/castor combination. I also had whiteline eccentric castor bushes up front of my R34. I removed them and put in poly non-adjustable ones to soothe my OCD (nobody ever set the castor the same side to side, and it'd be near impossible to do) and be happy the wheel is centered in the well now for clearance reasons. Yes I wanted it to move 1mm 'back' :p I've effectively set my castor back to stock, negating all the benefits of that which is supposedly massive. I can't tell any difference steering the car.
    • You reckon? I have to disagree. Notwithstanding that at some point we may all be forced to do this to our cars if we want to keep driving them, there is absolutely nothing about an electric-converted-previously-IC-car that is ever good. EVs that are built by OEMs on platforms that were originally IC already suck, let alone the shitty outcomes that result from doing it as a retro to something that was actually built as an IC car. This is because the platform really needs to be designed to house the battery in a useful place (ie, down as low as possible) and the motors are properly located relative to the wheels that they have to drive. Converted platforms already suck at this. But when you try to shove sufficient battery capacity into a previously IC car, you can't put it down on/in the floor, because that space doesn't exist. You can't find enough space where the fuel tank used to be (if it is an inboard fuel tank) and you don't want to hang it out behind the rear axle line if you had a rear fuel tank. And there's not enough space in the tunnel if you still want to use it for anything remotely like what it was originally used for. The engine bay is too big for a motor, and you'd really prefer that the motor for the rear wheels wasn't in the front engine bay anyway. And there's not enough room where the diff was for a proper man-sized E motor. And then.... there is the complete lack of soul and emotion that is provided by EVs. There are some cracking restomods out there. Like the Alfaholics GTA thingo. But it is petrol powered. Look at the alternative EV version of a GTA restomod by Totem. it is jaw droppingly beautiful. But by all reports is is objectively awful to drive, despite having 600 HP or something, simply because there is nothing there. It sounds like a sewing machine or a leaf blower. It should scream and wail and make the hairs on your neck stand up. Oh, and it's 1500 bloody kg in a car that was <900kg when new. GTRs are heavy enough as it is without pushing them up to 2tonnes worth of pork.
    • https://www.dezeen.com/2025/01/06/nissan-electric-r32-skyline-gt-r-godzilla-sports-car/   I reckon this is pretty cool. Lots of other Resto mods have turned to ev power.
    • hahaha @joshuaho96 the most action it gets is when I have to drive from West to SE VIC to meet the fam. Even then, it;s on highway cruising speeds
    • don't know anyone in this thread, but i just found it, read the entire thing in a few hours, realized greg is still posting progress, and just have to say, this is awesome. it looks awesome. 100% right about the Uras kit making it a pain to get on hoists...have the same kit on my 34 and it takes six 2x4s and race ramps to do it without taking parts off. this reminds me exactly of this thread. https://grassrootsmotorsports.com/forum/build-projects-and-project-cars/r63-amg-the-unicorn-of-my-destruction/110824/page8/
×
×
  • Create New...