Jump to content
SAU Community

Recommended Posts

I am selling some parts from my R33 Skyline GTS-t, since the EPA got me, and it all had to be removed..

The car was reasonably quick (at least in comparison to stock as it is now) with this stuff on there- ~260rwkw at 1.2bar, through a T3 turbo. My only drag run was at Calder on a slippery, hot night, where the car ran 13.57 @ 106mph.

I don't have a lot of the information on this stuff- it came with the car as I got it.

Basically:

Microtech MT-8 ECU: This was hooked up as a piggyback on my car to drive the larger injectors. I believe that this can also be used as a standalone computer. What you see in the pic is what you get- I don't have the wiring diagrams or know how to re-fit it- it was just removed from my car as it went back to the original computer, and is how the mechanic returned it to me. It also comes with the HKS Idle Stabiliser.

post-31481-1166417137.jpg

Injectors: I don't know the capacity, but the workshop said they were pretty serious, much too big for the original computer to handle. The car was running two fuel pumps to be able to provide the fuel for them. I may get them flow tested if they are slow to sell.

post-31481-1166417244.jpg

BOV: Self explanatory. It should fit where a stock BOV goes on the RB25DET. Note: The adapter is HKS, but the unit has no branding on it. It may NOT be genuine HKS.

post-31481-1166417315.jpg

Catch can: Vent to air type.

post-31481-1166417359.jpg

The lot: $800

Microtech ECU + Injectors together: $750

Microtech ECU: $500

Injectors: $300

BOV: $80

Catch can: $40

All of this stuff is 'as is'. I can say it was working when it was on my car a couple of months ago, but I cannot offer any guarantees. I am just selling it to recoup some of my losses of havng to go back to 'almost stock' to pass EPA requirements.

Please address all queries to clumpy 'at' tpg.com.au .

Postage is not included, it can be worked out based on where the postage is to. Can pick up at an agreed time also. Located in Wantirna, Melbourne.

Edited by ClumpyDog
any serial numbers on the injectors?

OK the injectors are a dark purple colour.

On one side it has the numbers:

A46-F32

On the other it has:

1103220

The previous owner said they were modified, but didn't give a capacity, or say how they were modified. That may change things. I guess it depends if you want to take a punt with the capacity.

As I said, if I cant sell them as is, I will spend the money to get them flow tested.

hey mate lookin into the computer n injectors. if u can find out wat size the injectors are i mite take them both off ur hands mate. the microtech can be rewired to suit ahn rb20 cant it?

Just a couple of things-

1) I have had a look at the BOV after several enquiries asking if it is a real HKS- and the answer is I don't know. The only branding on it is on the adapter to fit the RB25- which definitely has HKS on it. The actual BOV itself has no branding at all, and I made the (possibly false) assumption that it is HKS also. The only writing on it is 'Sequential Blow Off Valve'. I didn't mean to confuse, just it is possible I was incorrect.

2) The Microtech MT-8 is a programmable race computer that should fit any 4, 6, or 8cyl petrol car- it will most likely need wiring diagrams and/or plugs to fit a specific application. I would not rely on the wires I have, as it was just hooked up as a piggyback. It may be possible to get wiring diagrams/wires from Microtech themselves- I would only rely on the actual ECU itself being usable, not the wires as can be seen in the picture. It is not a plug and play computer- it needs to be properly set up/dynoed to work properly, and installed at least by someone with the correct diagrams with a bit of time on their hands. If set up properly they can put out some very nice power though.

3) At this point I do not know the capacity of the injectors. It seems that it is a requirement to know this to sell them so I will have to get them flow tested. Can't guarantee I will be able to sell them for that price if it costs too much to get them tested.

injectors are a drop in for rb25? into standard fuel rail/plugs?

Cheers, Bart.

They came out of my RB25, and original size injectors dropped straight in without any mods, so yes.

try this link.. http://www.witchhunter.com/flowdatapix/jA46-F32.jpg

the serial numbers on your injectors match up to these JECS units

Might save you some $ on testing but then again, they could be high flowed..

Thanks for that! 370cc is RB25 stock injector size, so they had better be high flowed, otherwise I have been ripped off buying replacement 370cc ones.

However- I don't think 370cc would have been sufficient to generate a reliable 1.2bar boost as it had when it was runing the Microtech, so I am thinking the previous owner's claims that they were modified may be correct.

My car is currently dynoed on the original ECU to 1.0bar, which is supposedly maxed out on the injectors with a fuel regulator increasing the pressure.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah everyone always seems to refer to them as S13 wheels however they came on R32 Skyline, A31 Cefiro, C33 Laurel etc., and also came polished diamond cut or painted depending on the model. Congrats on your GTS purchase! I'd personally leave it NA.
    • In this thing about this 100% renewal energy stuff I hear no one really talking about anything other than power and fuel really Power and fuel, whilst being a huge part of how we use the billion year old Dinosaur juices, are only 2, of the probably thousands of things that we need to use it for in the chemicals industries for making nearly everything we use nowadays I'm all for a clean planet, but if we want to continue to have all the day to day appliances and stuff that we rely on everyday we will still need fossil fuels Whilst I do love science, and how it can bring innovation, there's really a limit to how far it can go in relation to "going green" As for EV's, unless your charging of your own solar panels, it isn't helping the environment when you consider the the batteries, the mining processes required,  the manufacturing process required, and how long a batteries (read: the vehicle) lasts long term If I was supreme dictator of the world, I would ban the use of sugar for fizzy drinks and food additives and use that for ethanol manufacturing, petrol engines would be happier, and people would be alot healthier  Disclaimer: Whiskey manufacturing would still be required, so says the supreme dictator of the world Same same for all the vegetable oils that get pumped into all our food, use that for bio diesel Disclaimer: the supreme dictator would still require olive oil to dip his bread in This would take some of heat off the use of the use of fossil fuels which are required for everything we use, unless you want to go back to pre 1800 for heat and power, or the early 1900's for plastics and every thing else that has come from cracking ethylene  Would I be a fair and just dictator, nope, and I would probably be assassinated within my first few months, but would my cunning plan work, maybe, for a while, maybe not Meh, in the end in an over opinionated mildly educated arsehole typing out my vomit on my mobile phone, which wouldn't be possible without fossil fuels And if your into conspiracies, we only need the fossil fuels to last until a meteor hits, or thermonuclear annihilation, that would definitely fix our need for fossil fuels for manufacturing and power issues for quite some time  Meh, time for this boomer to cook his lunch on his electric stove and then maybe go for a drive in my petrol car, for fun    
    • It really helps that light duty vehicles have absolutely appalling average efficiency due to poor average load. Like 25% average brake thermal efficiency when peak is somewhere around 38% these days. So even a 60% BTE stationary natural gas plant + transmission and charging losses still doing much better with an EV than conventional ICE. And that's before we get into renewables or "low carbon nonrenewable" nuclear which makes it a no-brainer, basically. In commercial aircraft or heavy duty diesel pulling some ridiculous amount of weight across a continent the numbers are much more difficult to make work. I honestly think in 5-10 years we will still be seeing something like the Achates opposed piston diesels in most semi trucks running on a blend of renewable/biodiesel. Applications where the energy density of diesel is just too critical to compromise. CARB is running trials of those engines right now to evaluate in real world drayage ops, probably because they're noticing that the numbers just don't work for electrification unless our plan is to make glorified electric trains with high voltage wires running along every major highway and only a token amount of battery to make it 30 miles or something like that after detaching. Transport emissions is not insignificant especially in the US, but yes there's a lot of industrial processes that also need to be decarbonized. I agree the scale of the problem is pretty insane but EDF managed to generate ~360 TWh from their nuclear reactors last year and this is with decades of underinvestment after the initial big push in the 70s and 80s. I don't think the frame of reference should be solar-limited. France is not exactly a big country either. Maybe it doesn't work everywhere, but it doesn't have to either. We just can't live off of fracking forever and expect things to be ok.
    • Yeah, all the crude is used for fuels and petrochem feedstocks (pesticides, many other chemicals, etc etc). But increasingly over the last few decades, much of the petrochem synthessis has started with methane because NG has been cheaper than oil, cleaner and easier and more consistent to work with, etc etc etc. So it's really had to say what the fraction either way is. Suffice to say - the direct fuels fraction is not insigificant. Heavy transport uses excruciatingly large amounts. Diesel is wasted in jet heaters in North American garages and workshops, thrown down drill holes in quarries, pissed all over the wall to provide electricity to certain outback communities, etc etc. Obviously road transport, and our pet project, recreational consumption camouflaged as road transport, is a smaller fraction of the total liquid HC consumption again. If you're talking aboust Aussie cars' contribution to the absolute total CO2 production of the country, then of course our share of the cubic mile of coal that is used for power generation, metallurgy, etc adds up to a big chunk. Then there is the consumption of timber. Did you know that the production of silicon metal, for example, is done in Australia by using hardwood? And f**king lots and lots and lots of hardwood at that. Until recently, it was f**king jarrah! There are many such sneaky contributors to CO2 production in industry and farming. NG is used in massive quantities in Australia, for power gen, for running huge water pumps (like, 1-2MW sized caterpillar V16 engines running flat out pumping water) for places like mine sites and minerals/metals refineries. And there are just a huge number of those sort of things going on quietly in the background. So NG use is a big fraction of total CO2 production here. I mean, shit, I personally design burners that are used in furnaces here in Oz that use multiple MW of gas all day every day. The largest such that I've done (not here in Oz) was rated to 150MW. One. Single. Gas burner. In a cement clinker kiln. There are thousands of such things out there in the world. There are double digits of them just here in Oz. (OK< just barely double digits now that a lot of them have shut - and they are all <100MW). But it's all the same to me. People in the car world (like this forum's users) would like to think that you only have to create an industrial capability to replace the fuel that they will be using in 10 years time, and imagine that everyone else will be driving EVs. And while the latter part of that is largely true, the liquid HC fuel industry as a whole is so much more massive than the bit used for cars, that there will be no commercial pressure to produce "renewable" "synthetic" fuels just for cars, when 100x that much would still be being burnt straight from the well. You have to replace it all, or you're not doing what is required. And then you get back to my massive numbers. People don't handle massive numbers at all well. Once you get past about 7 or 8 zeros, it becomes meaningless for most people.
×
×
  • Create New...