Jump to content
SAU Community

Recommended Posts

Allan, your question is on the money.

VIV are responsible for checking the quality of work/parts used to repair a written off vehicle. Due to the extent of the damage it is understandable that the Victorian government would not like "patched-up" cars hitting the market. Thus every aspect of the vehicle's measurements have to be within factory tolarance and i believe only certain panel shops can approve/complete the work.

Asking for invoices of parts purchased should not be a big deal. Any w/shop can state they replaced blah, blah, blah........... but VIV wants proof of the replaced parts.

Pablo: You asking for "someone that knows people at VIV" raises a few questions of the legitamisy of the job :( .

Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2759010
Share on other sites

why dont u ask the people the questions, if your friendly to them and are genuinly curious, they will explain it to you in as detailed description as u want.

Then you will see what al is saying is true, anyone can say i replaced x part it cost this much on a invoice, but where is the tax receipt for the actual purchase of the car.

How many of us have heard about mechanics not changing things but actually still charging for them.

VIV just want to make sure this thing does not happen when the safety of the owner and every other person on the road may be at jeopardy because of some cost cutting.

Get the invoices, do everything by the book, and there is never anything to worry about

Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2759035
Share on other sites

OK VIV's suck balls!!!!

I had to get one done myself and it was a ball breaker.... you have to pay 300 bucks for jack shit...

But in the same sense it is also a good thing... they check to make sure u legal purchase all of your parts and that the repairs on the car are not dodgy...

If you have to get a VIV you have had a BIG hit and their were alot of repairs...

Just make sure you have original receipts and that you give them all the jig measurements and you should be fine...

And in all honesty if someone told me that there was a problem with my steering id be ripping it out and putting new shit in that was correct... last thing u want is to go through a corner and something snap.....

Good luck hope everything gets sorted out!!!!

Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2760022
Share on other sites

Allan, your question is on the money.

VIV are responsible for checking the quality of work/parts used to repair a written off vehicle. Due to the extent of the damage it is understandable that the Victorian government would not like "patched-up" cars hitting the market. Thus every aspect of the vehicle's measurements have to be within factory tolarance and i believe only certain panel shops can approve/complete the work.

Asking for invoices of parts purchased should not be a big deal. Any w/shop can state they replaced blah, blah, blah........... but VIV wants proof of the replaced parts.

Pablo: You asking for "someone that knows people at VIV" raises a few questions of the legitamisy of the job :( .

Same damn name and you still can't spell it! LOL! Don't worry most people can't spell it :ninja:

Al you have written what I was going to put anyway r.e list of work done, components used, total charges etc to ensure a safe and legal standard is adhered to. :laugh:

Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2760128
Share on other sites

Same damn name and you still can't spell it! LOL! Don't worry most people can't spell it :)

Al you have written what I was going to put anyway r.e list of work done, components used, total charges etc to ensure a safe and legal standard is adhered to. :miner:

Damn it!! Thought you were two L's ;) . Only now did i bother to look at your "Real name:" under the avatar

Don't understand the second part of that Alan :P

Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2762160
Share on other sites

Damn it!! Thought you were two L's :sick: . Only now did i bother to look at your "Real name:" under the avatar

Don't understand the second part of that Alan :)

LOL! second part, most people spell it the way you do with 2 ll's. Rarely I get Allen too :laugh:

Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2764817
Share on other sites

Meh I thought VIV would be hard too, but you just need to go to the right one and it's easy. Also make sure you have a couple of receipts for parts. They don't know how many parts needed to be replaced.

They sure do....they get whats called a WOVR Writen off vehicle report sent to them by the assessor.....however VIV's Are the biggest crock of shit known to man....I mean if there concerned about a job being repaired correctly why dont they issue panel beaters the ticket to be able to issue viv's????Ask them and they believe its a conflict of interest.......would you ask a panel beater to make sure that perspective vicroads employee's have had the mandatory labotomy before being employed????No you would ask a doctor to verify that

Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2777045
Share on other sites

Yeh I know I had the same greif, it's really stupid. I've seen the vehicle report. The VIV guy showed me. It's the most vague piece of crap. All it pretty much had written was damage to side and roof, with the crosses showing the location on a picture. I could have dinted the roof or snapped the B pillar and the VIV guy would have been none the wiser. Also when it says side damage how do they know if I just replaced the rear quarter or if I had the replace the whole rear suspension, door, etc... They don't. That's why it's so easy. Not worth the hassle though, when they knock you back for stupid crap. Congratulations on passing though.

Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2777309
Share on other sites

Yeh I know I had the same greif, it's really stupid. I've seen the vehicle report. The VIV guy showed me. It's the most vague piece of crap. All it pretty much had written was damage to side and roof, with the crosses showing the location on a picture. I could have dinted the roof or snapped the B pillar and the VIV guy would have been none the wiser. Also when it says side damage how do they know if I just replaced the rear quarter or if I had the replace the whole rear suspension, door, etc... They don't. That's why it's so easy. Not worth the hassle though, when they knock you back for stupid crap. Congratulations on passing though.

thank you :)

the one i went to had no idea what damage had been caused, i just gave him the reciepts for work done and he checked that it was done properly, they really had no idea what damage was caused in the accident

Edited by pablo101
Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2782981
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
×
×
  • Create New...