Jump to content
SAU Community

Recommended Posts

Allan, your question is on the money.

VIV are responsible for checking the quality of work/parts used to repair a written off vehicle. Due to the extent of the damage it is understandable that the Victorian government would not like "patched-up" cars hitting the market. Thus every aspect of the vehicle's measurements have to be within factory tolarance and i believe only certain panel shops can approve/complete the work.

Asking for invoices of parts purchased should not be a big deal. Any w/shop can state they replaced blah, blah, blah........... but VIV wants proof of the replaced parts.

Pablo: You asking for "someone that knows people at VIV" raises a few questions of the legitamisy of the job :( .

Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2759010
Share on other sites

why dont u ask the people the questions, if your friendly to them and are genuinly curious, they will explain it to you in as detailed description as u want.

Then you will see what al is saying is true, anyone can say i replaced x part it cost this much on a invoice, but where is the tax receipt for the actual purchase of the car.

How many of us have heard about mechanics not changing things but actually still charging for them.

VIV just want to make sure this thing does not happen when the safety of the owner and every other person on the road may be at jeopardy because of some cost cutting.

Get the invoices, do everything by the book, and there is never anything to worry about

Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2759035
Share on other sites

OK VIV's suck balls!!!!

I had to get one done myself and it was a ball breaker.... you have to pay 300 bucks for jack shit...

But in the same sense it is also a good thing... they check to make sure u legal purchase all of your parts and that the repairs on the car are not dodgy...

If you have to get a VIV you have had a BIG hit and their were alot of repairs...

Just make sure you have original receipts and that you give them all the jig measurements and you should be fine...

And in all honesty if someone told me that there was a problem with my steering id be ripping it out and putting new shit in that was correct... last thing u want is to go through a corner and something snap.....

Good luck hope everything gets sorted out!!!!

Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2760022
Share on other sites

Allan, your question is on the money.

VIV are responsible for checking the quality of work/parts used to repair a written off vehicle. Due to the extent of the damage it is understandable that the Victorian government would not like "patched-up" cars hitting the market. Thus every aspect of the vehicle's measurements have to be within factory tolarance and i believe only certain panel shops can approve/complete the work.

Asking for invoices of parts purchased should not be a big deal. Any w/shop can state they replaced blah, blah, blah........... but VIV wants proof of the replaced parts.

Pablo: You asking for "someone that knows people at VIV" raises a few questions of the legitamisy of the job :( .

Same damn name and you still can't spell it! LOL! Don't worry most people can't spell it :ninja:

Al you have written what I was going to put anyway r.e list of work done, components used, total charges etc to ensure a safe and legal standard is adhered to. :laugh:

Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2760128
Share on other sites

Same damn name and you still can't spell it! LOL! Don't worry most people can't spell it :)

Al you have written what I was going to put anyway r.e list of work done, components used, total charges etc to ensure a safe and legal standard is adhered to. :miner:

Damn it!! Thought you were two L's ;) . Only now did i bother to look at your "Real name:" under the avatar

Don't understand the second part of that Alan :P

Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2762160
Share on other sites

Damn it!! Thought you were two L's :sick: . Only now did i bother to look at your "Real name:" under the avatar

Don't understand the second part of that Alan :)

LOL! second part, most people spell it the way you do with 2 ll's. Rarely I get Allen too :laugh:

Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2764817
Share on other sites

Meh I thought VIV would be hard too, but you just need to go to the right one and it's easy. Also make sure you have a couple of receipts for parts. They don't know how many parts needed to be replaced.

They sure do....they get whats called a WOVR Writen off vehicle report sent to them by the assessor.....however VIV's Are the biggest crock of shit known to man....I mean if there concerned about a job being repaired correctly why dont they issue panel beaters the ticket to be able to issue viv's????Ask them and they believe its a conflict of interest.......would you ask a panel beater to make sure that perspective vicroads employee's have had the mandatory labotomy before being employed????No you would ask a doctor to verify that

Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2777045
Share on other sites

Yeh I know I had the same greif, it's really stupid. I've seen the vehicle report. The VIV guy showed me. It's the most vague piece of crap. All it pretty much had written was damage to side and roof, with the crosses showing the location on a picture. I could have dinted the roof or snapped the B pillar and the VIV guy would have been none the wiser. Also when it says side damage how do they know if I just replaced the rear quarter or if I had the replace the whole rear suspension, door, etc... They don't. That's why it's so easy. Not worth the hassle though, when they knock you back for stupid crap. Congratulations on passing though.

Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2777309
Share on other sites

Yeh I know I had the same greif, it's really stupid. I've seen the vehicle report. The VIV guy showed me. It's the most vague piece of crap. All it pretty much had written was damage to side and roof, with the crosses showing the location on a picture. I could have dinted the roof or snapped the B pillar and the VIV guy would have been none the wiser. Also when it says side damage how do they know if I just replaced the rear quarter or if I had the replace the whole rear suspension, door, etc... They don't. That's why it's so easy. Not worth the hassle though, when they knock you back for stupid crap. Congratulations on passing though.

thank you :)

the one i went to had no idea what damage had been caused, i just gave him the reciepts for work done and he checked that it was done properly, they really had no idea what damage was caused in the accident

Edited by pablo101
Link to comment
https://www.sau.com.au/forums/topic/147819-viv-help/#findComment-2782981
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 馃挭馃徏 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
    • Well, I had an Edward Lee's special edition odo windback car/motor with a RB25DET S2 and I put down 372kW with a good amount of track abuse for 1.5 years before the ring lands decided it didn't want to stick around anymore 馃ゲ But probably didn't help I kept on smashing try limiter on the track and a few skid pans.
  • Create New...