Intercooler Piping In Melbourne

[urbanoperations]

hey all

need a piece of custom intercooler piping made up?

anywhere in melbourne anyone can suggest?

at the right price?

cheers

[Coupe-This]

hey all

need a piece of custom intercooler piping made up?

anywhere in melbourne anyone can suggest?

at the right price?

cheers

u get what u pay for

any decent metal fabricating shop can make it up for you.

any exhaust shop can make it for you ...

etc ...

heck, ive made exhausts and i/c piping before ...

[arep3]

possibily RE could. have never asked ray but im pretty sure they could

[assyrian4evaa]

for wat car?

[SABBAi]

It is easy to do. Make it up yourself. Get some mandrel bends or what you need and go from that.

[R31Nismoid]

Im sure if you contacted any of the 15 odd workshops listed in the sticky...

http://www.skylinesaustralia.com/forums/in...showtopic=13305

They would be able to help you out

[urbanoperations]

its for an R32 GTS-T

[Roy]

It aint easy!

My 2c....its not hard to do right but its easy to get wrong. For good quality custom job it will cost up to $600...there is easily 8 hours work in doing it plus materials

[Coupe-This]

It aint easy!

My 2c....its not hard to do right but its easy to get wrong. For good quality custom job it will cost up to $600...there is easily 8 hours work in doing it plus materials

hehe i know that all too well, godamnit

[sammus]

hehe i know that all too well, godamnit

[Ronin 09]

make sure you get the ends of each pipe lipped so to prevent hose blow-off!

[Coupe-This]

make sure you get the ends of each pipe lipped so to prevent hose blow-off!

awww, where is the fun in that ... no fun at all ... NONE ...

also get heavy duty t clamps

shyte all over regular hose clamps in every way, just dont crush the aluminium, (if ur pipes end up being made out of alloy)

[assyrian4evaa]

i have custom kit for a R33 gtst but that wont be any good 4 ya

[Coupe-This]

i have custom kit for a R33 gtst but that wont be any good 4 ya

how can u have a custom 'kit' ???

shyte like that confuses me

[assyrian4evaa]

how can u have a custom 'kit' ???

shyte like that confuses me

simple just walk up to a fabricator/metal shop and tell them wat u want most of them will make it for u but not very cheap

[SABBAi]

So far it has taken me around 8 hours to get 90% of the pipework complete for mine.

There is a lot of measure, mark, measure, fit, mark, measure, weld....

Mandrel bent sections are fantastic. If you do it by hand, make sure you have at least a miter box, and a hacksaw blade that is suitable for high speed steel so that you can get a nice clean and straight cut.

[urbanoperations]

Chrisman- can you fabricate up 1 piece of piping for this r32 for me ?

hehe

[SABBAi]

Sure. Where are you located? PM me your details and we'll go from that.

[R32gts-t]

to save some money you could source the parts yourself,

Tubesales in Thomastown deliver high quality stainless steel bends and straight pieces anywhere in melbourne for around the $10 mark, if you are from the east side it is definately worth having it delivered,

the bends are approx $23 each and the 3 inch stainless is approx $16 per meter.

I found it to be pretty cheap.

they are in the white pages and are pretty good to deal with.

[Roy]

If its for an R32 then i might be able to help you out as im about to change turbo setup so looking to sell my cooler piping and start again using allow instead of 316L Stainless.