Jump to content
SAU Community

Recommended Posts

EY PPLE

i blew a fuse when i was installin neons

but i dont know which fuse it acutally is.

i cant even foolow it cos its in dash and so many wires.

wat can i do???

Have you checke all the fuses under the dash. This is where MOST of the fuses are housed. Right hand side of steering column, there is a panel about 75mm wide with a recess to pull it out with. Then you will need to locate the blown fuse, not real easy, but that's life.

Link to comment
https://www.sau.com.au/forums/topic/147863-i-blew-a-fuse/#findComment-2759405
Share on other sites

EY PPLE

i blew a fuse when i was installin neons

but i dont know which fuse it acutally is.

i cant even foolow it cos its in dash and so many wires.

wat can i do???

stop fooling with your car and take it to someone before you do some serious damage..

Link to comment
https://www.sau.com.au/forums/topic/147863-i-blew-a-fuse/#findComment-2759614
Share on other sites

stop fooling with your car and take it to someone before you do some serious damage..

wtf r u talkin bout ????

whats the point in being a car enthusiast if u dont do the shit urself.

its part of it.

and i enjoy givin it a go .

instead of just denieing being able to do it .

i had already got the whole thing working and connected.

it was only because the postitive and negative connection touched.

....

thats how u learn,

by making mistakes.

not gonna do serious damage.

Link to comment
https://www.sau.com.au/forums/topic/147863-i-blew-a-fuse/#findComment-2760549
Share on other sites

wtf r u talkin bout ????

whats the point in being a car enthusiast if u dont do the shit urself.

its part of it.

and i enjoy givin it a go .

instead of just denieing being able to do it .

i had already got the whole thing working and connected.

it was only because the postitive and negative connection touched.

....

thats how u learn,

by making mistakes.

not gonna do serious damage.

By crossing positive and negative connections, it is possible you can do serious damage. Airbag systems, ECU, dash lights, bulbs, etc - all possible to mess them up by not taking appropriate precautions. Such as disconnecting the negative battery terminal from your car when working on anything electrical in your car.

Take the advice of a previous poster and check your fuses. Also consider searching the forum, as this is a common problem which has been asked several times in the last month.

Link to comment
https://www.sau.com.au/forums/topic/147863-i-blew-a-fuse/#findComment-2760592
Share on other sites

the fuse that you would have popped would be the ones under the dash.

prob one of the lights fuses, cant tell you exactly which one of the top of my head, but grab a multimetre and put it on each one and see which one it is.

Link to comment
https://www.sau.com.au/forums/topic/147863-i-blew-a-fuse/#findComment-2760743
Share on other sites

i did the exact same thing buddy, just in case you havnt figured it out already its simple...just change the (electronics part fuse) in the fuse compartment under your steering wheel. Its the 4th last 1 on the left hand side of the fuse box. Replace it with a 10A and your up n going again.

Edited by RB26DETT_GODZILLA
Link to comment
https://www.sau.com.au/forums/topic/147863-i-blew-a-fuse/#findComment-2762369
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...