Jump to content
SAU Community

Pod In Cai Box Defect?

NYTSKY

By NYTSKY,
in Engines & Forced Induction

 Share

Recommended Posts

QRI05E Mentor

QRI05E

Posted
Posted (edited)

Im pretty sure that with NSW law, the air filter needs to be secured and shielded... in other words, the AFM needs to be bracketed onto the body of the car and the POD needs to be almost completely enclosed... If the CAI box has the top half opened then it will still be classed as a defect...

Cheers

Edited by QRI05E
NYTSKY Grand Master

NYTSKY

Posted
  • Author
Posted
Im pretty sure that with NSW law, the air filter needs to be secured and shielded... in other words, the AFM needs to be bracketed onto the body of the car and the POD needs to be almost completely enclosed... If the CAI box has the top half opened then it will still be classed as a defect...

Cheers

I have a bracket for the pod and the CAI is completly enclosed so i think ill be ok.

CHEERS mate.

mjones Collaborator

mjones

Posted
Posted

in nsw ur NOT allowed to have ANY pod filter UNLESS it has been and got a drive by and stationary noise test for induction noise!!!!!!! and it ain't cheap!!!! i've been done a few times and there is noway out of it!!!!,yeh some coppers might not give a sh*t but when it comes down to the law u can't have a pod filter unless it's been approved by nsw rta.

NYTSKY Grand Master

NYTSKY

Posted
  • Author
Posted
in nsw ur NOT allowed to have ANY pod filter UNLESS it has been and got a drive by and stationary noise test for induction noise!!!!!!! and it ain't cheap!!!! i've been done a few times and there is noway out of it!!!!,yeh some coppers might not give a sh*t but when it comes down to the law u can't have a pod filter unless it's been approved by nsw rta.

Bloody hell why dont we all just drive hyundais then!

RTA really do suck the fun out of everything.

d00dz Grand Master

d00dz

Posted
Posted
In victoria you can only have 1 intake mod...so a pod is ok, and a front mount is ok, but a pod AND a front mount is a defect.
in nsw ur NOT allowed to have ANY pod filter UNLESS it has been and got a drive by and stationary noise test for induction noise!!!!!!! and it ain't cheap!!!! i've been done a few times and there is noway out of it!!!!,yeh some coppers might not give a sh*t but when it comes down to the law u can't have a pod filter unless it's been approved by nsw rta.

Thats the thing.. If it's due to the "emmisions" crap then why isnt it standard all over the country?

Does that mean NSW has "better" air/low noise than VIC due to NSW using box'ed emmision'ed tested PODs, while VIC doesnt?

It's double standards and rediculous! (sp).

:)

mjones Collaborator

mjones

Posted
Posted
Thats the thing.. If it's due to the "emmisions" crap then why isnt it standard all over the country?

Does that mean NSW has "better" air/low noise than VIC due to NSW using box'ed emmision'ed tested PODs, while VIC doesnt?

It's double standards and rediculous! (sp).

:D

it's because nsw rta are a bunch of assholes!!!from memory i think it's about $550 for the drive by test and if you don't pass there goes your $550,i've found having the k&n pannel fillter in the box works just aswell anyway+alot less sh*t from coppers

dineth Proficient

dineth

Posted
Posted
Thats the thing.. If it's due to the "emmisions" crap then why isnt it standard all over the country?

Does that mean NSW has "better" air/low noise than VIC due to NSW using box'ed emmision'ed tested PODs, while VIC doesnt?

It's double standards and rediculous! (sp).

:laugh:

well, i think it all evens out in the end, i mean we have 100000000000 x 50 more speed cameras in Vic, just look at the new set up they got goin on the western ring rd, a speed camera over every over pass pretty much....(ok so im a little over the top but u get the drift) while we get to keep 'fully sik' induction noise, we cant really go anywhere with it without being dicked by the 'Bracks' gold mine.

saliya Rising Star

saliya

Posted
Posted

Hi folks,

The information about the NSW noise test isn't quite correct. Yes, you need to "pass" a noise test - as described in ADR 28 -

but that noise test need not cost you anything. All you need is access to a dB meter. It doesn't need to be conducted

by an authorised tester.

The thing that costs is the engineering Signatory's say-so that the vehicle complies with ADR 28 - this is your

engineering papers - and they only _really_ need to do this particular test if you make modifications that are likely to affect

ADR 28. A cold-air intake pipe probably won't need to be tested; a pod will (in NSW).

Of course, usually the Signatory will want to conduct the test themselves - so the cost is built-in to your paperwork.

But you can do it yourself, quite easily. All the information on how to do it is on the DOTARS website.

Regards,

Saliya

skylinecouple Experienced

skylinecouple

Posted
Posted

Hey Dave, another skyline in Leumeah ! Got to be a good thing. Just a thought, getting the car tuned the other day at the Hitmans and took the lid off the airbox, well guess what, a whole 2kws. No thanks. The standard airbox flows heaps til around 240kw.The sucking noise from a pod, enclosed or not will drive you nuts.

NYTSKY Grand Master

NYTSKY

Posted
  • Author
Posted
Hey Dave, another skyline in Leumeah ! Got to be a good thing. Just a thought, getting the car tuned the other day at the Hitmans and took the lid off the airbox, well guess what, a whole 2kws. No thanks. The standard airbox flows heaps til around 240kw.The sucking noise from a pod, enclosed or not will drive you nuts.

Hi mate hope to see you around,its been a pain in the arse lately defected twice in two weeks.I hope you are luckier.

mjones Collaborator

mjones

Posted
Posted (edited)
Hi folks,

The information about the NSW noise test isn't quite correct. Yes, you need to "pass" a noise test - as described in ADR 28 -

but that noise test need not cost you anything. All you need is access to a dB meter. It doesn't need to be conducted

by an authorised tester.

The thing that costs is the engineering Signatory's say-so that the vehicle complies with ADR 28 - this is your

engineering papers - and they only _really_ need to do this particular test if you make modifications that are likely to affect

ADR 28. A cold-air intake pipe probably won't need to be tested; a pod will (in NSW).

Of course, usually the Signatory will want to conduct the test themselves - so the cost is built-in to your paperwork.

But you can do it yourself, quite easily. All the information on how to do it is on the DOTARS website.

Regards,

Saliya

when i got defected i had the option of returning it to standed or specificly take it to penrith rta and get a drive by and standing still noise test done,which i had to book in for and they quoted me approx $550 for the drive by and the standing still test DOES HAVE TO BE PASSED by a approved tester.(whats stopping you from buying a proper exhaust db test machine and doing it urself???)which only cost about $800,i don't think the rta are going to pass that now are they you could of tested any car!!!and the signatory only charges from memory about $18.00 to pass the defect after you have returned to standed or got it passed by nsw RTA.i've been defected 3 times for a pod fillter and had to go down this road many times. Edited by mjones

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • sonicii
      Lower A arm Skyline v35

      By sonicii · Posted

      The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Red Sky II
      Looking for autoelectrician in Perth who can do the OEM to double din stereo upgrade.

      By Red Sky II · Posted

      Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...