Jump to content
SAU Community

Recommended Posts

hi guys ive bought a greddy plenum from a[ trusted] seller....no not ebay either

and ive been told its a fake

how do i tell if it is the real item there is no stamping on the plenum of any sort and im just trying to find out how i can decifer an orige from a fake?

Link to comment
https://www.sau.com.au/forums/topic/148152-greddy-plenum-question/
Share on other sites

somone must know something about the plenum that decifers it from the fakes

and yes glenn ive seen the gtr ones and they are stamped but the rb25 ones are quit difrent

Edited by spirosky33

PICS tell a thousand words.....who sold it to you?

If its a trust one it should have come with a red greddy sticker, and the plastic packaging inside the box should have blue trust / greddy writing on it, forget what it says

id rather not say who sold it to me

it wouldnt be fair and its against forum rules as im pretty sure it is the real deal it came with the box and red sticker too but id like to prove somone wrong also with proof that it is the real deal

so what your saying is that there is no greddy marked on the plenum.....

Ok, so the kit come with a packet full of bits and pieces of vacume line stuff IIRC, and you would of needed a TB adapter unless you are using a Q45, the adapter comes in a small box with greddy / trust all over its plastic packaging too....

and the stuff filling the rest of the box is that annoying polystyrene stuff.....it was a funny colour IIRC, blue or something (yeah blue semi circlies Im sure of it)......if thats how yours has come its genuine

You should be able to pic the cheap fake from the actual Greddy product a mile away. The copy Greddy intake plenums have a terrible terrible finish.

If your was genuine it should have included Greddy documentation in the box to certify its authenticity and should have included the red Greddy badge as mentioned that is usually attached to the top of the plenum itself after you fit it.

Mine came in a TRUST box, all the vacuum lines have TRUST printed on them, all documentation is PLASTERED with TRUST/GReddy, there is a GReddy badge which sticks on, the TB adaptor has GReddy embossed on it..

I got it from nengun, no probs there.. however 6 months later autobarn sell them for the same price it cost me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...