Jump to content
SAU Community

Indicators Going Really Fast

shmiddy

By shmiddy,
in General Maintenance

 Share

Recommended Posts

Al Grand Master

Al

Posted
Posted

LED's use less current, thus less load. There is a device/curcuit that controlls the flash rate (looks like a solinoid), due to the less load it blinks faster, just like if a bulb was blown, i'm pretty sure these solinoids can be replaced with a differant rated item.

Just have a vague idea, but am not sure :ninja:

Omurru Veteran

Omurru

Posted
Posted

on ebay you can buy electronic flasher units. As al said leds draw less current and the mechanical flasher units that come standard work of the load drawn through them. When i got my car it had little indicators on the front, so indicators went fast. bought one of these units, plugged it in. (flasher unit is just under the steering wheel on the left side), i just unplugged the stock one and plugged in the electronic one and zip tied it next to it cos i couldn't work out how to get it out :rofl: I bought a few things from this guy, stuff normally comes from honkers but he's good and reliable.

http://cgi.ebay.com.au/3-pin-Electronic-LE...1QQcmdZViewItem

  • 1 year later...
Black Ninja Experienced

Black Ninja

Posted
Posted
on ebay you can buy electronic flasher units. As al said leds draw less current and the mechanical flasher units that come standard work of the load drawn through them. When i got my car it had little indicators on the front, so indicators went fast. bought one of these units, plugged it in. (flasher unit is just under the steering wheel on the left side), i just unplugged the stock one and plugged in the electronic one and zip tied it next to it cos i couldn't work out how to get it out :( I bought a few things from this guy, stuff normally comes from honkers but he's good and reliable.

http://cgi.ebay.com.au/3-pin-Electronic-LE...1QQcmdZViewItem

Does anyone knows how many flashers unit is needed ? something similar to a relay ? any link to how to fix this ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Cleaning my wheels 😍

      By PranK · Posted

      A little follow up here on the ceramic coating.  We've had storms galore here and I've done a few ks, enough to gross them up  Consensus is that they didn't get as dirty as usual, the coating definitely repelled a little of the dirt and I think they kinda snowball. They get a little dirty and then they get dirty faster which makes sense. Cleaning them regularly would allow them to protect better.  Cleaning was a breeze. I tried first to just hose them off which, unsurprisingly, did nothing. But, making the wheels wet and then just wiping them over with a used but clean microfibre cloth was all that was required. I didn't need any cleaner at all, just water and a cloth. The wheels look amazing again.
    • PranK
      My BMW 335i

      By PranK · Posted

      Gave her a nice wash today and took extra time to clean off the tree sap and tar and crap. We have a usable garage now so she'll stay cleaner longer. Took a few snaps in some nice light afterwards.   
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      OK, solid mount Z1 diff brace is in, pretty straightforward, it picks up 3 diff hat bolts and ties them to 2 support bolts on the subframe. Pretty sure someone else on here said they had reduced axle tramp with this but mine was already pretty good for smooth wheelspin, and still is....will see you this goes over time and whether I end up with a broken rear diff hat
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Ah yes, but the part in my hand was actually painted and fitted by me! I knew any front lip was likely to be sacrificial but I've had to fix it twice already... by the time I buy a fibreglass fixing kit, sort out sandpaper blocks, buy some fibreglass filler, body bog, spend the time and effort for a 'Greg' result... a new one being $290 seems like it's the better way to go and spray that with bedliner/raptor coat and we're all pretty again.. Would have preferred it last more than a month though. Them's the breaks I suppose.
    • MBS206
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By MBS206 · Posted

      I find it funny that the USA is finding out all this really really weird stuff, and people from the USA are coming here treating it like gospel, yet, all the info on solving those issues is here on these forums for the last 15 odd years... Also, I know how much heat it takes to ignite the hood lining of an R33 skyline. I worked it out myself... It also took a LOT of time, and heat for it to do it... Big single, and I needed to drive the car, so retarded the timing off to "protect it". Yeah, that was a bad move for cruising on a freeway with only 15 degrees of timing on it. That was a lesson I learned around 2009. So that's over 15 odd years ago. Aligning water and oil, that's identical for any turbo engine, it's not Japanese specific. If a shop doesn't know how to make sure the core is rotated the right way, then they shouldn't be touching any turbo engine. That's not a matter of "We haven't had Skylines for that long here"...
×
×
  • Create New...