18 X 8 With 15mm Spacers

[reflexman]

hi all,

i've got a set of 18 by 8's front and rears for my R33 GTST with 235/40's. Am about to purchase a set of 15mm hubcentric spacers, and was wondering if the fronts and 25mm ones for the rear would still sit inside the guards after this. any help is appericiated.

Thanks

EDIT: forgot to say it's been lowered bout 40mm

EDIT again: Just found out that i can only get the 15mm's for the fronts only. say if i get 20 or 25mm ones for the rear, would that still be okay as well ?

Edited December 22, 2006 by reflexman

[n15m0]

whats the offset on all 4 wheels?

[reflexman]

whoops, forgot about that... offset is +40 on all 4

cheers

[salad]

That would effectively make the offset +25 on the front and +20 on the back. It depends on how much camber you run to clear the guards. You said your car is lowered 40mm. If you havn't corrected this, you should have about 1.5deg? With that, you should just clear the guards, will probly need to lip them though, and maybe a little bit of flaring.

On the front they should fit, once again, might need to lip them. Shouldn't have to do any flaring though.

Edited December 22, 2006 by salad

[reflexman]

yup, i've got more or less 2 degrees negative camber on the fronts and rears, but it's not even (am getting a camber kit to fix this)

cheers for the reply salad

[n15m0]

yeah as salad has said, ur effective offset would be +25 all round..u could possibly get away with lipping if you stretch 215 or 225 rubber all round..+ camber

Oh and just to add...ur spacers will be illegal too in QLD...If u have full comp insurance and were ever involved in an acco *touch wood*...good luck in making ur claim.