Jump to content
SAU Community

Rb20 With Gt30

Drifterdan

By Drifterdan,
in Engines & Forced Induction

 Share

Recommended Posts

Drifterdan Collaborator

Drifterdan

Posted
Posted (edited)

Hey Everyone,

I'm currently building a rb20 for drifting with (so midrange is pretty important). Anyway I had a gt30 with .63 internal housing, but the courier has lost it etc etc.

What I'm wondering is: What turbo should I replace it with for 240+ kw that isnt "too" laggy.. And do I need aftermarket cams or will adjustable cam gears on the stock items do?

I have had a read through the rb20 dyno thread and the tdo6 and gt30 seem to be the most common turbos at that power output. However all this talk of different trim sizes etc confuses the crap out of me :)

Would it be better to mix and match parts to make the ideal turbo? Similar to what disco potato is doing in his gt30 thread? (id imagine his gt30 is designed for the rb25??)

My setup so far is :

Rb20det

6 boost exhaust manifold

oz power front facing plenum

aerospeed adjustable cam gears

gtr injectors

040 bosch fuel pump

Anyway any help would be apreciated :/

Dan.

Edited by Smooth
Link to comment
https://www.sau.com.au/forums/topic/148327-rb20-with-gt30/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

If you want mid-range... HKS 2530.

Although, you wont make much more than 220rwkw, but its probably the best choice which will give you the meatiest mid-range you'll ever get from an RB20

Otherwise maybe a set up to a HKS 2835, bigger so little extra power for less mid.

Or even an RB25 hi-flowed turbo would be in that park also and a bit cheaper

But yea, as you have said, the GT30 series is really more RB25 territory, even if you used a .63 rear. It will be quite "peaky".

Link to comment
https://www.sau.com.au/forums/topic/148327-rb20-with-gt30/#findComment-2768665
Share on other sites
The Mafia Grand Master

The Mafia

Posted
Posted
There was a thread on here a few months back where the author had a 2871 core in rb25 housings. Did a quick search, can't find it. Anyone else remember?

Yeap, thats one of my Mates, DaleFZ1. Just send him a PM asking him for the specs. He said the turbo is excellent.

His thread is gone, I think they prune SAU? I think its a silly idea... (to prune good threads)

Can someone confirm, this?

Link to comment
https://www.sau.com.au/forums/topic/148327-rb20-with-gt30/#findComment-2774197
Share on other sites
wolverine Grand Master

wolverine

Posted
Posted

HKS GT-RS is more or less a GT2871 ready to bolt on with all lines elbows etc for around $2700. this will get you into your power range.

certainly you can do it cheaper with garrett gear directly but dale will probably attest to a little running around to achieve his results. when time = money buying a bolt-on might be the go.

Link to comment
https://www.sau.com.au/forums/topic/148327-rb20-with-gt30/#findComment-2774659
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

2.7k for ONE turbo kit is mighty rich.

GT-SS (twin TT) sells for 3.3k (landed if you pay tax) so 2.7k kit for a single IMO is rich.

The Garrett will be $1700 or less.

When the kit for GT-SS copies is 2.6k vs 3k for the kit (untaxed) then they are worth the gamble of the customs irregularities.

Link to comment
https://www.sau.com.au/forums/topic/148327-rb20-with-gt30/#findComment-2774768
Share on other sites
Dale FZ1 Veteran

Dale FZ1

Posted
Posted (edited)

Here is the thread:

http://www.skylinesaustralia.com/forums/in...=127600&hl=

Has a few pics and other details that might help.

The core used was a 48T GT2871R - CHRA 446179-5031. This is smaller than that used in the HKS GT-RS. The only common componentry between this one and a Garrett GT28RS is the 53.8mm turbine; it has a 71mm (vs 60mm) compressor.

I'm totally satisfied with the performance outcome on RB25. At a guess I would say it would be very useful on a RB20, but allow maybe a few hundred rpm difference in response. It will give lots of mid range punch. Plenty of data log runs shows that on a winding road run I rarely run over 5500 before changing up, mostly run on the fat mid range and early boost.

cheers

Edited by Dale FZ1
Link to comment
https://www.sau.com.au/forums/topic/148327-rb20-with-gt30/#findComment-2774939
Share on other sites
The Mafia Grand Master

The Mafia

Posted
Posted
We do not prune threads.

What on EARTH gives you that idea?

No threads go, no threads get deleted.

Simple

haha jus thought that might have happened becaus I did a search and onl got limited results..

any reason for this?

Link to comment
https://www.sau.com.au/forums/topic/148327-rb20-with-gt30/#findComment-2774943
Share on other sites
wolverine Grand Master

wolverine

Posted
Posted
2.7k for ONE turbo kit is mighty rich.

GT-SS (twin TT) sells for 3.3k (landed if you pay tax) so 2.7k kit for a single IMO is rich.

The Garrett will be $1700 or less.

When the kit for GT-SS copies is 2.6k vs 3k for the kit (untaxed) then they are worth the gamble of the customs irregularities.

latest price from nengun for HKS GT-RS is $2534. as posted before it can be done cheaper buying something without a HKS tag but there is more running around.

Link to comment
https://www.sau.com.au/forums/topic/148327-rb20-with-gt30/#findComment-2777160
Share on other sites
paulr33 Grand Master

paulr33

Posted
Posted

why have u chosen a gt30? from my knowledge of drifting (jack all) you need good average power, bad suspension setup (to make it slide) and good response. i dont think a gt30 will give you any of those attributes on an rb20. a hks 2530 or rb25 should however, cheaper ($500 for an rb25) and then get a really good tune with a real exhaust, should yield good average power. then work the suspension to give maximum sliding ability

Link to comment
https://www.sau.com.au/forums/topic/148327-rb20-with-gt30/#findComment-2777179
Share on other sites
Drifterdan Collaborator

Drifterdan

Posted
  • Author
Posted (edited)

I take it your askign me?

I was only using the gt30 as it was only costing me 1300 brand new and had the rb20 friendly .63 housing. I knew it would be laggy but just wanted to try it out :)

Doesnt matter now as it got lost in the mail. Looking at a highflow turbo now.

Cant say I agree with the "you need crappy suspension to drift" line though :iluvff: My car is set up to grip, with with good tyres. Id get better tyres but until the car is going, I wont know if it can spin anything more sticky :P You still need grip when your sideways remember :ninja:

Edited by Smooth
Link to comment
https://www.sau.com.au/forums/topic/148327-rb20-with-gt30/#findComment-2777229
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • PLYNX
      BCNR33/ECR33 Door corner piece replacement

      By PLYNX · Posted

      Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • BourneToLive
      R32 GTR Park lights issue

      By BourneToLive · Posted

      So was there a solution to this problem? I’m having this issue now. 
    • Duncan
      Beers and skylines Fatz style

      By Duncan · Posted

      not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • Duncan
      BCNR33/ECR33 Door corner piece replacement

      By Duncan · Posted

      I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...