Jump to content
SAU Community

Recommended Posts

OKie dokie.

Well i got this car about 7 months ago.

It's an R32 sedan GTS-T Auto.

Stock as a rock from Nisswreck with some crap white paint with scratches and marks all over it.

RightSide.jpg

OK so first thing was to get an exhaust. I went to Exhaust Technology and got Marky Mark to fit me a 3" cat back system with a 5" Jun BL cannon. To my stupid knowledge i didnt want my cannon coming out on an angle. I wanted it coming straight out but now i realise it looks like a barina. So back to marky I go once my engine is fixed to get either my cannon cut and welded back on with mass angle or get flutes. Not to sure.

I got it painted to fix up the problems with the paint work. Wish I didn't now as that money would of paid for the manual conversion and some other goodies.

This is my car 2 days after getting it back from the paint shop.

PandaRightSide1.jpg

I have done the full 100,000km service as my odometer doesnt work properly. SO i have no idea how many kms have been done on my now busted engine.

r324door-1.jpg

no my rims by the way

WithFrankiesWorks.jpg

AlliesChromies-1.jpg

not my rims either.

LeftMirror2.jpg

Now i have to replace the engine with either a 24 or 25det. not sure which one yet.

Im planning on getting a full origion Kit, fmic, Section Coilovers, Work VS - Kf's and the list goes on.

I need more money and a new engine.

Cheers for having a look at my car.

If u hate it say so but nicely please lol :rofl:

Brenton

Edited by 32 4whore
Link to comment
https://www.sau.com.au/forums/topic/148335-my-32-4dr-wip-drifter/
Share on other sites

  • Replies 89
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Ok so this is the front cut that was sourced for me.

10-01-07_1634.jpg

Interior wise its shithouse. Excuse the French.

Full 100k service has been done.

10-01-07_1633.jpg

10-01-07_1630.jpg.

The way its coming along it might take a little longer then planned. But due to it being a full front cut i got type M brakes with it. YAY.

If anyone wants parts off it let me know.

Joel already has dibbes on the auto trans.

Edited by R32_4door_drifting

LOL oh there on allright.

NOT!!!!!!!!!!!!!!!!!!!! Frigging dangerous those things. No grip. My right foot would be slipping everywhere.

And Ryan you don't love me anymore anyway. I thought we had something.

I hope to see u boys out at Mallala this sat night.

Update on the WIP.

Engine is out with auto trans and tailshaft.

Found out the inside of the front of my chasis is rusting a bit. not cricket. might need to hit it with an angle grinder and just run it over the area and fish oil it up to prevent the spreading.

12-01-07_1653.jpg

^^^^^^^^^^^^^

Just it on the hoist with a wheel off, not sure why but anywho, and no engine.

12-01-07_1657.jpg

12-01-07_1711.jpg

12-01-07_1656.jpg

The Auto g/box assembly.

12-01-07_1710.jpg

The busted engine with all my good bits i bought for ti a month before it died off.

12-01-07_1659.jpg

And the new engine.

12-01-07_1700.jpg.

Its slowly coming together.

I need more of the parts off my old engine to start getting out of my hair. I need it all gone as Dad doesnt want the engine out the back collecting dust and making his backyard a dump.

Edited by R32_4door_drifting

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • This piece is obscenely discontinued. I honestly hate the frameless window design because the rubber gets stressed and the guides as well every time you open and close the door.
    • I wouldn't be concerned at all, other than to suggest having them flow tested when you receive them to confirm they are reasonably similar, and then put the highest to lowest flowing ones in cylinder 6,1,5,2,4,3
    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
×
×
  • Create New...