Jump to content
SAU Community

Recommended Posts

Did they say why they couldn't remove the rear left wheel?

Lock nut? Spinning stud?

Either way you should be able to spin the wheel around and see with a torch how much meat is left on the pad. Looking at the opposite wheel will give you a good indication how much meat is left on the left.

The skylines brakes wear fairly evenly due to being 4pots up the fronts and 2 pots at the rear. So the inner doesn't wear early like that of the usual clamp type pos brakes.

I wouldn't be concerned.

Have you bought it yet?

Get under the car and check the chassis rails for damage.

  • Replies 6k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

yup :wave:

hey guys i need a little advice, im purchasing the car on friday but there is a small problem and that is the RAA couldnt get the rear left wheel off the car to check the brakes on that rotor.

Got any advice, should this sort of thing hold me up greatly?

why dont you take it to a workshop that specialises in skylines? RAA is pointless when it comes to these checks, they only good for when your car breaks down and needs a tow.

yup :wave:

hey guys i need a little advice, im purchasing the car on friday but there is a small problem and that is the RAA couldnt get the rear left wheel off the car to check the brakes on that rotor.

Got any advice, should this sort of thing hold me up greatly?

wtf? Id be wondering why they would not be able to take a wheel off...cbf, or something wrong?

I'm not too fond of the RAA inspections.

I bought a VS 5ltr 5speed some 7years ago, had it RAA inspected and they missed an obvious inlet manifold water leak and loose engine mount that had the exhaust hitting the body under acceleration. :wave:

The inlet manifold leak was a real pain in the arse to get fixed too.. They had the car for 3 weeks and racked up almost 70km's, I got it back and the clutch felt all spongy like they had been slipping it. :)

From there that car was down hill... Such a damn unreliable (drivetrain) money pit. Well at least the new owner got a good deal; new diff, gearbox and rear subframe. :O

The RAA said that "several of the wheel nuts were damaged, so unable to complete brake check."

The guy did a very thorough report and they do check everything on their check list. I mean id want a full refund of the 200 dollars i spent to get myself some peace of mind before buyin the car.

I'm not worried about the brake pad, Im worried about the wheel coming off, I think im going to tell him that I'm not coming to pick up the car until he can get that wheel off and then refit it with new nuts. without breaking his nuts is the key, but i guess im the one with the cash anyway.

Edited by SAZilla
The RAA said that "several of the wheel nuts were damaged, so unable to complete brake check."

The guy did a very thorough report and they do check everything on their check list. I mean id want a full refund of the 200 dollars i spent to get myself some peace of mind before buyin the car.

I'm not worried about the brake pad, Im worried about the wheel coming off, I think im going to tell him that I'm not coming to pick up the car until he can get that wheel off and then refit it with new nuts. without breaking his nuts is the key, but i guess im the one with the cash anyway.

so he has to brake a nut to get the broken nuts off :dry: how do nuts get broken...id ask for explanation.

he is thorough, but did they do a compression check?

yes, came up with 5 percent within eachother,

is that good?

@cubes, private sale bud

my mate said if the problem is that serious ill have to spend quite a bit to get the thread welded back onto the rotor or whatever to repair the damage done by the nuts. only problem me and my mate -who knows quite a bit about turbo vehicles- picked up was just a scratch on the door that could be buffed out and thats it. the car was beautiful on the test drive.

Edited by SAZilla

Update: I rang mike said to him id pick up the car on monday definitely if that wheel was removed then refitted succesfully, he agreed and is getting a mechanic to do it. so thats sorted...

so yer 5 percent is what the RAA said, I gather thats 5 percent loss or 5 percent difference between all cylinders.

5% variation is a fair amount but I'd say its most likely <5% which is considered ok.

The chances of a car thats 10yrs old having near perfect compression ratio is slim.

Please cheak the head lights when you pick it up... I was excited and forgot to... Turned the head lights on and then had to hunt around for H3C bulbs that absolutely no one had apart from autobarn that was closed. :dry:

yep the lights in her have been changed already, all but this rear wheel bullshit is fine. all the suspension and undercarriage is fine aswell but he couldnt check out that disk and that wheel and anything behind it. i rang the guy and told him to fix it for me today so i can pick up car on monday. so hopefully all goes well

easy

when i go to pick up the car, with my mate, I will say:

"fixed that wheel?, I want to just check the brake pads and the rotor before I give you the cash."

then ill check it, find that its all good, and then bang im done.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • It's something we all have to consider as time marches on. Also consider lifted rally MX5 conversion at that point.
    • I should be fine for a few more years, whilst I do have arthritis I also exercise and do mobility training every day to keep as fit and healthy as I can, military life, which is the actual cause of most of my joint issues, has set daily regimes, which I weirdly enjoy I also train alot smarter now, not really focusing on lots strength or puffy muscles, I'm more focused on maintaining what I have for my future older self, I actually train as much mobility now as I do exercising Check out this "simple" drill I have been doing daily prior to training now for a while now, this has worked wonders in my all round mobility   
    • I'd say one thing that may make you sell is the same reason the guy with the hard top roof sold his. He got old, and his back was giving him too much grief stopping him getting in and out... Old guy said he was 73! He looked and sounded younger than 73 to me! Or maybe I'm just aligning with old people more...
    • Already looked at a few prior to getting the MX5, really nice car, had all the mod cons, but I wasn't really sold on the new "look" I did miss my 2017 Limited, and I personally prefer the "look" of the older car over the new model, but, when pondering I kept going back looking at MX5's But it was same same for the new ND's, I wasn't sold on the new "look", especially the RF with its weird roof, which only half goes down, like a targa top sort of thing As I stated before, I did look at NC's, but the cars I looked at were PRHT's, but I didn't like their roof line "look" of the PRHT, until I saw the soft top version, (someone on SAU posted a for sale ad for one with a soft top that caught my attention, you can blame them for my choice.....🤣) and.... that old style detachable hard tops were available for them, which keeps the old MX5 more smoother flowing roof line, and the more rounded body style, similar to the NA-NB, to me, the arse end of the ND looks to "modern" Much like how I prefer the NC1 front bar, over the later models How long will I keep this car for is unknown, but currently, there's nothing else out there that "floats my boat" for a small, fun, little "sports car", that I can play with and enjoy looking at and driving But, who knows what the future holds, and going off current new car styling, if I replace it, it will be a older model something something       
    • looking forward to your t56 swap man its a game changer if it works! 
×
×
  • Create New...