Precision Turbochargers In Wetherill Park

[QRI05E]

Hey guys, after some extensive research, I have decided to high flow my stock RB25DET turbo. Precision Turbochargers in Wetherill Park are quoting $1650 for a maximum oversize stage 3 ball bearing high flow with Garrett internals rated at 450 – 500HP… They were so helpful, honest and very friendly. I have asked a few local performance shops including V&E Rigoli and everyone seems to highly recommend them… One shop even told me of an R33 with their turbo and all supporting mods topped 282rw/kw in shoot out!

The reason I’m considering these guys apart from their excellent customer service is that they are around the corner from me and will do the high flow in one day.. drop off in the morning pick up in the afternoon…

Are any of you guys using or heard anything about their High flow turbos??

MERRY CHRISTMAS!

Regards,

Sarkis

[Andi]

Hey Sarkis,

Hey you doing mate? I know the name of the shop but unfortunately don't know much else. I am interested in hiflowing my turbo as well mate and since we're pretty much neighbours, do you think they'll give some sort of discount if we get both done at the same time?

Also, was that price including change of turbo or the cost of the turbo itself only? I'm looking for around 240-260rwkw so one of these sounds like they might do the job. If the stage 3 is rated at 450-500 what is the stage 1 and 2 rated at?

Cheers,

Andy

(Bloke who sold you the GTT SMIC)

[QRI05E]

Hey Andy, im well thanks buddy and you?

That price is to give them your turbo and get it highflowed and they can do it within a day if u arrange it with them.

the stage 1 & 2 are journal bearing and rated at approx 400HP which should produce 230 - 240rw/kw and they are priced at $1350. If you want an excellent service and deal, check out SLIDEING PERFORMANCE's High Flow package.. its an unbeatable price and Aaron is a top bloke... the only reason im considering Precision Turbo is cause its a BB highflow...

Any feedback on these turbos will be appreciated guys!

Regards,

Sarkis

Edited December 24, 2006 by QRI05E

[moonus]

hey sarkis, im really keen on highflowing mine too. as Andy was saying, do u think u cud find out if they can do us sum sort of group discount if a couple of us do it?

Cheers, Anton

[eMsta]

will be getting a hi-flo turbo next year sometime - and looks like sliding performance has the goods....

[2rismo]

I don't see the point in paying $1650 for a high flowed turbo with the prices of some bolt on replacements these days. $1650 buys you an aweful lot of NEW turbocharger these days.

[QRI05E]

Hey fella's, ill ask if we can organise a group buy however as far as value for money, Sliding Performance takes the cake! im 100% sure that Precision turbo wont match or beat Aarons deal in the journal bearing high flows.

As far as the Ball Bearing high flows, im sure we can get a much better price then the GCG Highflow price, cause already without any discount Precision Turbochargers are cheaper than GCG so with a group buy or even an SAU exclusive offer i can probably organise a real good deal... ill get back to you guys asap!

Regards,

Sarkis

[QRI05E]

I don't see the point in paying $1650 for a high flowed turbo with the prices of some bolt on replacements these days. $1650 buys you an aweful lot of NEW turbocharger these days.

Maybe so, but many of our cars are daily drivers and would like to maintain the "stock" look under the hood.. not to mention the requirement of new oil, water lines and adaptors for most new turbos... so therefore the highflow is best streetable option as stated by many of the best tuners... However, Trooper has advised me that Garrett are releasing a New RB25 bolt-on turbo and has been shown to produce 260+rw/kw which im also very keen on... release date is in feb for this new turbo so its price will determine wether i highflow or get this new Garrett... Just considering all my options...

Regards,

Sarkis

[moonus]

Adrian, other than the sliding performance high flow, wat else do u suggest for less than that money?

[QRI05E]

Anything cheaper then the Sliding Performance High flow will be nothing but a Sunbeam Hair dryer... At Sliding Performance's prices, he is getting orders WORLD WIDE! So if your after a quality job at an unbeatable price, contact Aaron at Sliding Performance...

If your after a Bolt-on Ball Bearing Highflow, Precision Turbochargers have an excellent price and service and might try and organise a group buy asap... or GCG's highflow for $1750 SAU price...

Cheers

Edited December 24, 2006 by QRI05E

[T04GTR]

ive used them before. very good and knowledgable.

john or mark.

they built me a t04e that made 326rwkw on 1 bar on my 26. all on by 3500.

[QRI05E]

Thanks for the feed back Dave! Yea i spoke to John and he seemed very knoledgable.. So far it looks like ill be going ahead with a high flow from Precision Turbo... uless this new Garrett unit isat a real good price...

Cheers

Edited December 24, 2006 by QRI05E

[satanic]

Another vote for the turbos from Sliding Performance - unbeatable in price/quality/outcomes!

[QRI05E]

Hey Stan, i was really impressed with your high flow results... are you running stock cams and manifold?

Cheers

[NYTSKY]

Dont sliding do theirs for $890?

[QRI05E]

Yep they sure do Dave, and even less for exchanging your turbo.... thats why they have best bolt-on turbo package you will ever find, however for those who are wanting a BB highflow, GCG was thought to be the only decent place to get it done... Now i have Precision Turbocharges and have an excellent reputation with all the top performance shops in the area as well as offering a better price than GCG... all of V&E Rigoli's cars are using their turbos...

Cheers

Edited December 25, 2006 by QRI05E

[T04GTR]

1 thing though. make sure you opt for either balll bearing or a heavy duty thrust bearing option.

[NYTSKY]

Yep they sure do Dave, and even less for exchanging your turbo.... thats why they have best bolt-on turbo package you will ever find, however for those who are wanting a BB highflow, GCG was thought to be the only decent place to get it done... Now i have Precision Turbocharges and have an excellent reputation with all the top performance shops in the area as well as offering a better price than GCG... all of V&E Rigoli's cars are using their turbos...

Cheers

Is BB more reliable or can you run more boost with BB?

[T04GTR]

ball bearing is far more durable. but cant take as much shit thrue the oil. ie... they can die from shity oil.

[paulr33]

there are more differences between BB and plain/journal