Jump to content
SAU Community

Recommended Posts

Sorry guys for taking so long to get back to you. I had an operation and was in hospital. I have some photos and can give you feedback on the process.

This is one hell of a job and I am not 100% happy with it either, but shit is it hot. Requires a lot of mods and is by no way straight bolt in. You can forget about bolting... just doesn't happen. Instead of bolts, just cut and weld..... It will take about 1 to 2 days to do.

The hinge originaly supplied was fantastic and solid and wouldn't work as it was too thick for the guard. So a replacement was sent :mad: ... The thin hinge for sports coupes. Well .. I can tell you I want the solid hinge... this thin one has a bit of flex in it. I don't know how the other lambo hinges are, but these have a bit of wobble when they go up. Not major, but not as solid as the first hinges. Some thing I could live with.

I have included some pics of the first hinge installed. We re-inforced the points on the guards where the pressure was going to be applied.

post-33008-1175562569.jpgpost-33008-1175562669.jpgpost-33008-1175565321.jpg

As you can see, we cut out the section where the hinge is bolted on and welded a 3mm plate. The plate was only tacked on for the moment and then welded properly when we were happy at the end. For the door, as you can tell has three bolts. We got a 3mm plate and welded 3 bolts to it. We drilled the holes in the door and put the plate in. The bolts were bolted on to the hinge. Silly me forgot to take a photo of the plate with the bolts. :pirate::ph34r: As you can see a plate was welded to the door where the wiring loom was so we could drill a hole to put the other bolt through. A hole has not been cut to date for the wiring loom, but I'll get to that a little later on.

I took these photos when we did the left hand side.

post-33008-1175565431.jpgpost-33008-1175565138.jpg

we then welded the shocker nipple on and attached the main shocker.

post-33008-1175565692.jpg

The second strut was exactly like the main strut. When we put it on, there was too much pressure (90kgs to be exact). You needed to be a body builder to close the door and the door would not sit right because of the pressure. The easiest thing to do was trial and error. I bought 2 new gas shocks of the same legnth and we experimented with different pressures. The correct pressure was 20kgs or if you work in the old scale 44 pounds. This was perfect. The door lifts up easily, easy to close... actually very impressed with the closure of the door. To pull the door down is very very easy and light. Once you pull it all the way down, it will swing in itself to close the door. No major adjustments either. Must admit, it works great. Now for the bad news.....

The door trims need to be cut to have enough clearance to open the door. How much you might ask .... well this is how much I cut off.

post-33008-1175566560.jpg

Not excessive... just need to do a fibreglass mould and put in a speaker.... too easy. :ph34r:

Ohh, almost forgot ... the fender... Did I roll it. Nope. I bloody cut it. he he he. :( Who needs to pay $100 for rolling. Nothing better than a grinder, and a panel beating hammer at no cost.

post-33008-1175566540.jpg

What it looks like .....

post-33008-1175566903.jpg post-33008-1175568260.jpg

For the wiring loom.... What I have done, but as yet to finish... I went to a wreckers and bought the plugs and wirining loom for the doors. I will be making an extension cable. Nice an easy rather than extending the cables. It will be a hell of a lot cheaper just extending the wires, but cause of my operation, I reallly can't get down to the panel beaters to work on it. So I will make the extension cable from home and then just plug it in.

So that's the deal guys. Sorry for taking so long. The choice I suppose is up to you. The panel beater who helped me with this, said he would do it for people for $1500. For me.. that's too expensive. I'm not a real handyman, and wanted assistance to make sure I don't F#$K up. But if you have a mig welder within arm's reach and patience, it's not too bad. This is definitely not for the faint hearted. If your gut feeling is it is too hard, don't even try.

I'll leave it up to you guys. If there is enough interest, I will see the numbers and let you know. Would I do it again or get some professional to do it... hmmm... I haven't seen a proper professional installed one, so I couldn't really compare. If you don't mind cutting the door trim and you are a bit of a handyman... I would suggest it. If you leave the door trim as is and get someone to do it it will cost approx $2000+. I'd rather the cash in my pocket, but that's only my choice. I have to admit, there were some times i wanted to rip my hair out because of the initial hinge being too big and the bottom strut which had too much pressure. Apart from that, it wasn't too bad.

I will keep you posted on my door trim and the extension cable. I will also post up some pic's of these. I am waiting for the car to be resprayed and then work on it. So may be a little while, but hopefully this month.

So that's were i'm at. Fire away any questions you may have.

post-33008-1175565107.jpg

Edited by Filecon
  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

damn, that is one huge job!!! but it looks so mint :laugh: can't wait to see that painted up :laugh:

I had an R32, it didn't require any cutting or welding at all, well apart from the inner guard,

A bit of a shame you had to cut the door panel to fit ;) but oh well, you gotta make some sacrifices i guess :wave:

http://cgi.ebay.com/ebaymotors/NEW-Heavy-D...bayphotohosting

I had a kit like this, I'll try get some pics up soon of my job, but I ended up selling the car and kit, because I ran out of money for my GTS-4 project

  • 1 month later...

i got a bolt on kit for a R32 still havnt got them in tho. just wondering does anything happen with the wiring cause the work shop that is painting my car said that the wiring might need extending. if someones know what goes on with a R32 what work is in volved to fit these?? thanks

i got a bolt on kit for a R32 still havnt got them in tho. just wondering does anything happen with the wiring cause the work shop that is painting my car said that the wiring might need extending. if someones know what goes on with a R32 what work is in volved to fit these?? thanks

your wiring shouldn't need to be extended, mine didn't need to and it was an R32 GTS-t coupe

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Pfft. As if I'd ever point a high pressure washer at my car.
    • The nature of my commute has changed. Way back then it was traffic lights all the way, for ~28km. It sucked. When they finally stitched the expressway together I could do a good 15+km of it at a steady 80-100 with no stopping. That alone has gotten me down to flat 10s. Prior to that it was mid-high 10s. I can't remember the delta that I saw when I got the idle down. It was only ~150 rpm, because the idle speed was never terrible, but for the delta in consumption to be noticeable it would have had to have been at least 0.2-0.3 L/100km - which is not to be sneezed at when it comes for absolute free. It's only about 50L per year, but that's ~$100. A few extra pizzas is always welcome. Note that I have a record of every tank of fuel that has ever gone through my car except for a handful put in by someone else, like my mechanic. I can show you the difference between stock RB20 and tuned RB20, stock RB5Neo and tuned, winter and summer fuel blends, winter and summer fuel blends when the ambient temperature is not appropriate for the blend, working O2 sensor, blown O2 sensor, boosting f**k out of it and frightened to boost it because it is pinging, and so on. OK, I probably can't do all that now with 100% clarity - but at the time when any of those things were in event, you could see it in the records. There's 25+ years of simple tank after tank records, so you have to look for landmarks to work out approximately how old any single record is. What's really important is the meta data and that lives in my head.
    • If you're claiming the issues are not skyline specific, then either the USA is living in the 90s / early 2000s, OR you have the issue of "survivor bias". Which is you're mainly hearing and listening to those with terrible experiences, and haven't found the guys who have cars with good decent builds and no problems. It happens in AU too, that plenty of people keep having issues, and they keep going to the workshops that are known to be shit "because I read on the internet". Even worse, are those who keep posting on the internet as though they know for a fact what something is, when they've never touched/looked at said item in their life, and again are making assumptions, based on something they read, or because it's a certain way in other cars. It's even funnier when those same people debate the facts with the people who've lived and breathed this stuff for over 15 years. Example, I've had someone tell me you can't do something with a Skyline, because they read it on the internet, except I can tell they're wrong, as I did that exact thing back in 2008 with my Skyline.
    • The funniest part I saw, was someone would bitch and moan on FB about something, Andy would be the one to respond, asking for more info, if he could contact them, what the engine setup is, what their config file was, and 95% of the responses were people just going "der! It doesn't work" and Andy going "What doesn't work?" And then going "The firmware!" And they'd go around in circles as no one could ever give information, and Haltech couldn't fault things on the bench, (especially when people wouldn't give any specifics).   Many moons ago, when Andy was back at e420c stage, he reached out to me, and asked me to test different plug and play looms for him (already had an e420c in the car on his V1 PNP loom). And he kept asking me, as I was competent enough to be able to give him some specific feedback on what was/wasn't working, how to replicate the faults etc, and work through things with him. Most people are terrible at answering the questions they're asked, or being able to provide quality feedback other than "it doesn't work".
    • I say it often, none of this stuff is really Skyline-specific per se. But in general there's not a lot of people who actually know what they're doing. A lot of people charging like they do. Agile software development probably isn't the greatest idea for an engine controller.
×
×
  • Create New...