letemlaf Posted December 30, 2006 Share Posted December 30, 2006 I thought i would give this a go for a bit of fun when i go to my gf's house with a whole pack of v8's that live over the road. Im a little unsure on what to do... Steps 1, 2 and 3 i can do (is it saying i should hear lumpy idle now?) Where it says to turn the car off and dial back the crank angle sensor, is that listed under 'cranking'? I think the rest is pretty straight forward after that. Cheers 1. Turn car ON 2. SETTING, IGN/INJ 3. Press DOWN 1 time If you observe lumpy idle then note the number ie: -1 If you don't observe lumpy idle, press DOWN again. Keep repeating until you get lumpy idle, don't go past -3 or -4 it's too much. Now with that number in mind do the following 1. Turn car OFF 2. Dial back the Crank Angle Sensor whatever number you had in IGN/INJ Adjust, so if you had -2 dial it back 2 deg 3. Turn car to ACC 4. Edit the IGN map and shift every cell UP whatever number you used in #2. So if it was -2 then add 2deg timing to every IGN cell on the map 3. Turn car ON 4. Observe lumpy idle Link to comment https://www.sau.com.au/forums/topic/149181-powerfc-cammed-lumpy-idle/ Share on other sites More sharing options...
Rolls Posted December 30, 2006 Share Posted December 30, 2006 And why would you want to do this? It reminds me of the tiger port for a rotary, gives the lumpy brap brap and no power down low without the bonus of added power. Link to comment https://www.sau.com.au/forums/topic/149181-powerfc-cammed-lumpy-idle/#findComment-2782597 Share on other sites More sharing options...
letemlaf Posted December 30, 2006 Author Share Posted December 30, 2006 I thought i would give this a go for a bit of fun when i go to my gf's house with a whole pack of v8's that live over the road. Link to comment https://www.sau.com.au/forums/topic/149181-powerfc-cammed-lumpy-idle/#findComment-2782656 Share on other sites More sharing options...
MMM Posted December 30, 2006 Share Posted December 30, 2006 still a stupid reason Link to comment https://www.sau.com.au/forums/topic/149181-powerfc-cammed-lumpy-idle/#findComment-2783240 Share on other sites More sharing options...
R31 POWER Posted December 30, 2006 Share Posted December 30, 2006 I remember when i first installed the GTR injectors and had the PFC base map it was lumpy as hell. It was that rich i think it would of fouled the plugs if i let it idle that long So yeah adding more fuel at the cell at idle would make it do that also. Link to comment https://www.sau.com.au/forums/topic/149181-powerfc-cammed-lumpy-idle/#findComment-2783244 Share on other sites More sharing options...
paulr33 Posted December 31, 2006 Share Posted December 31, 2006 my tune does it every now and then, the main cause is its cell bouncing between different IGN spots, you can see it on map tracer, quickly swapping between two cells, if the ign varies alot on the adjacent cells it will lump around heaps. you can also getting it from messing with the afm ducting pipe width. Link to comment https://www.sau.com.au/forums/topic/149181-powerfc-cammed-lumpy-idle/#findComment-2784479 Share on other sites More sharing options...
letemlaf Posted December 31, 2006 Author Share Posted December 31, 2006 Thanks guys still a stupid reason Lucky i didnt ask Link to comment https://www.sau.com.au/forums/topic/149181-powerfc-cammed-lumpy-idle/#findComment-2784485 Share on other sites More sharing options...
shnaped_second Posted December 31, 2006 Share Posted December 31, 2006 (edited) lol sounds like your jealous, get a v8 Edited December 31, 2006 by shnaped_second Link to comment https://www.sau.com.au/forums/topic/149181-powerfc-cammed-lumpy-idle/#findComment-2784743 Share on other sites More sharing options...
jazza08 Posted January 1, 2007 Share Posted January 1, 2007 my 32 wit gtr injectors used to do it randomly! very rarely would it sit still on idle, used to jump between 650-750 or there abouts usually but i had a rom in it not power fc, never understood why it did that only sometimes Link to comment https://www.sau.com.au/forums/topic/149181-powerfc-cammed-lumpy-idle/#findComment-2785233 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now