Jump to content
SAU Community

Recommended Posts

if it makes the weird thump when its meant to be playing it generally says that either the amp's channel that your running off is playing up and sending an incorrect signal or that the amp itself is tuned way to high for the recommended setting of the sub.

btw has it only just recently started to make the noise or is this from a new amp/sub set up?

if your located in the northen burbs of melb your more than welcome to bring it round to my place and i can have a look at it.

Edited by cheez
  • 2 weeks later...
if it makes the weird thump when its meant to be playing it generally says that either the amp's channel that your running off is playing up and sending an incorrect signal or that the amp itself is tuned way to high for the recommended setting of the sub.

btw has it only just recently started to make the noise or is this from a new amp/sub set up?

if your located in the northen burbs of melb your more than welcome to bring it round to my place and i can have a look at it.

thanks for offering to fix it, but i live in sydney... the problem has only just started to play up... i will try re tuning it

thanks heaps

When I started to hear distortion in my car I originally thought I had blown a rear speaker. Turns out it was the sub, the cone had separated from the rubber surround.

But really this could be a lot of things. Try another sub if you have one/can borrow one, that will rule out your sub packing it in.

Fixxxer :laugh:

  • 10 months later...
When I started to hear distortion in my car I originally thought I had blown a rear speaker. Turns out it was the sub, the cone had separated from the rubber surround.

But really this could be a lot of things. Try another sub if you have one/can borrow one, that will rule out your sub packing it in.

Fixxxer :D

ive got the same problem at the moment i call the dude that installed my system he rekons its the amp sending sme signal or interferance somthing like that anyway

lucky its still under warranty so now ive gota take it bak to moto quip and they will send it off then i will knoe whats wrong i guess ill try my other fusion sub just rule out the sub

shiting itself any info would be great ppl if you have had the same prob and fixed it.

Cheers

Allan.M

alright, so im assumung that when you listening to music, the sub just randomly starts thumping? few things you need to check.

1 make sure that your rcas arent shorting out anywhere.

2. make sure that they are plugged in securely to the headunit, and to the amp

3. make sure that the amp is grounded properly, and is receiving sufficient power

4. ensure that all your speaker cables are secure, and arent shorting out.

if this doesnt fix the problem, then take the amp out, and try it in another car. if it still does it, the amp is most likely fuxxord

alright, so im assumung that when you listening to music, the sub just randomly starts thumping? few things you need to check.

1 make sure that your rcas arent shorting out anywhere.

2. make sure that they are plugged in securely to the headunit, and to the amp

3. make sure that the amp is grounded properly, and is receiving sufficient power

4. ensure that all your speaker cables are secure, and arent shorting out.

if this doesnt fix the problem, then take the amp out, and try it in another car. if it still does it, the amp is most likely fuxxord

cheers bud its under warranty wiring is fine thats the first thing i checked was the rca ant that so i will get my amp back in 2 weeks

cheeers

Allan.M

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't be ridiculous. "2-3 ugga duggas or one Oof. You have to use Oof on tie rods because you can't get an ugga dugga on there." Is not helping the guy at all.
    • I have done a lot of research before posting here and on gtruk forum. couldn't find anything. I have my gauges all part except the needle itself. the needle has a extremely small hole in the center, but the shaft going to the needle is extremely small and appears to have nothing to index it either. doesn't seem strong enough to simple pry or pull without damaging something. Already tried the old spoon trick on a extra triple meter I have from a gtt, but no luck. the center cap comes off easily but the hole in the meter face plate aren't big enough to get over the needle itself. figured this would be my best place to find someone who might have actually removed theirs. wonder if there is some type of small pin press tool to push the pin in while pulling the needle base off.
    • Ok...its taking me long enough to finally do this.  Feck financial security...heart disease will get me soon enough anyway So welcome to the garage..."Clem" Belsil80 has been running a 370Z in Super TT series. So after entering with him in last years Winton 300 i figured I  need my own car. Seems SAU Vic race cars need to be yellow....{tick} Reckon with enough motor i will be able to make up for the lack of talent and stay ahead of the 370Z... but the LS powered S13 and E36s are a ways up the road Aim is to have a car that doesnt stop or turn but has a bit of shed built motor with jam...maybe some cream  First step is getting this ex drift car log booked I am keeping faithful silver car. As the road-club car gets upgrades the race car wil get the sloppy seconds
    • Assuming that they will come off without damage at all.... i would have thought just pull straight up off the spindle with a something or other than can reach underneath. Have you searched for youtube vids of people doing similar on R34s or any other Nissan from the same vintage? They should be the same technique, in all likelihhood.
    • Keeping in mind that sandblasting is really aggressive on softer metals like cast alloy, and you can do damage that you might regret. For trash wheels, not a problem. For wheels with value/scarcity issues, etc.... perhaps a less aggressive media is a better choice?
×
×
  • Create New...