Jump to content
SAU Community

Recommended Posts

hi everyone...i was driving to work and had to go into an RBT located on old northern rd (i think)...infront of Oak Hill College...hills area

the cop asks me to show him my engineers certificate....which i dont have...so he makes me open my bonnet

things he said were illegal

1) Pod

2) Frontmount

3) Atmo Bov

4) Turboback exhaust

5) Bodykit...including front bar, rear bar, skirts and gtr wing..He said "If its made out of FIBREGLASS it's illegal"

6) Numberplate on the side of front bar

7) Bride bucket seat and rails

then he said

ur P-plates cant be seen through ur 35% tint because its too dark (which is legal) and must relocated them

he then comes back and says ur car isnt registered in the RTA database

he says im giving u a caution and take ur car to the RTA to fix it

Question

1) my car isnt showing up in the RTA database..can i get defected?

2) Becasue i got a caution...will the cops know i've already been told and defect me the next time or let me off?

3) What does caution mean? ie. first time offence?

Link to comment
https://www.sau.com.au/forums/topic/149605-cautionwarningfirst-time-defect/
Share on other sites

stay the hell away from castle hill.. I've lost my licence and defected twice on that road infront of my school (oakhill college)... dude see if you know a dodgey mechanic to clear your defects and then stay out of high heat areas like castle hill, liverpool and the city..

yehh hills area is getting baddd

ive neva been pulled over in the city

hhmm...........

i got done on new years day :(

near st marys

the thing that realy sh!t me was wat the cop said.

drove past him, he done a u turn and followed me for 20m then pulled me over for rbt, since i was under the limit he started looking at the car,wheels, exhaust, kit, tint, steering wheel

then the usual

pop the bonnet...

these are his words exactly after checking every part of the car

"since i pulled you over im gonna have to do something, i cant just let you go"

got defected for pod and exhaust

wat a way to start the new year

dirty cocksuka !

Hi, Just a question... so the cops usually do RBT's around Oakhill...

Where else in the Castle hill area do they usually have RBT's?

Just to know which streets to stay clear from...

stay away from oakhill college and off showground road (at night)

theres a defect station near it...behind the council

when u get pulled over there the cops make u follow them to the defect station

also does anyone know the legalality regarding rims..coz i just got new rims be havent put them on

like...1" or 2" larger than stock or has to be the same rolling diameter?

how wide?..if it doesnt go out further than the gaurds

and the clearance level from the wheel arc and tyre..wat distance?

also does anyone know the legalality regarding rims..coz i just got new rims be havent put them on

like...1" or 2" larger than stock or has to be the same rolling diameter?

how wide?..if it doesnt go out further than the gaurds

and the clearance level from the wheel arc and tyre..wat distance?

OK, my understanding is this:

- the new wheel and tyre combination must NOT have a rolling diameter greater than 15mm, but obviously if you go from 16's to 20's then you're probably more likely to get problems;

- I think it's a TOTAL increase in track of 1" (or 26mm), so you can get wheels 1" wider on each side. If you've got the correct offset, it would mean that 0.5" would sit on each side of the centreline of each of the new wheels, so effectively that covers your TOTAL increase in track width. (I hope you can understand this - it makes sense in my head...)

- your wheels and tyres should NOT go out past the width of the gaurds, and the clearance between the wheel arch and wheels/tyres should be fine if you've chosen the correct width and offset to upgrade to. What you should worry more about is the height of the car off the ground AT ALL POINTS (chassis, crossmembers, suspension bits, exhaust, etc.). The minimum ground clearance is 100mm, any lower and you're looking at a defect.

ONCE AGAIN, DON'T TAKE THIS AS THE BIBLE, CHECK THE RTA WEBSITE AND READ IT FOR YOURSELF. Also, remember that some people (whether it's the RTA, the cops or whoever) may have a different interpretation of what the rules actually mean - it'll be your word against theirs if you have any problems...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • me too wasnt real happy and cost me a penny or 2 to replace
    • But there's the archetype for the name plate! Here's my view on that stupid TÜV ruleset. Buy a brand name aftermarket piece of equipment. In this case, the Mines front pipe we're talking about. Get it TÜV certified on the car. Damage the underside of it, say on a speed bump. Cut out the damaged section, replace with fresh metal. (For the sake of the argument only), continue doing that to the whole pipe until it is all gone, replaced with new metal. Is this grandfather's axe still the same front pipe? The design hasn't changed (much). The pipe walls are in the same places. The flanges are in the same places. It is functionally identical. How does this differ from a pipe that is ever so slightly different in fabrication (ie the number of welds in it, a few mm here and there in terms of where the pipes run, are joined, etc)? Anyone with 0.5% of a brain can see that there is absolutely no way that the performance (power, environmental aspects, noise, etc etc) of it can be any different than the genuine Mines pipe. Maybe even Mines made 2 versions of this design, with the same differences. How would anyone (say a TÜV inspector) ever be able to differentiate between them? And yet, they are so bloody anally retentive about this stuff. Mad. How upset would they be if you had the wrong spring washers on the flanges?
    • Sakura (cherry blossom) tree at the end of a path going through Kabutoyama Park in Nishinomiya, Japan. Taken with Sharp Aquos R8
    • After a fairly extensive search using Japanese terms and checking Minkara etc, I couldn't find anything even close to your front pipe in the photos. I'm no expert but the two pipes merge really close to the flange connected to the catalytic converter which is rather unique from what I've seen, which makes me think it's more than likely a custom front pipe. The welds and 'more pipe sections than usual for a brand name pipe' makes it seem like a custom one.  Here's some photos of an old Mine's front pipe. You can see that it's just 4 pipe sections as opposed to 6, and arguably looks more like a 'production' front pipe:
    • Wtb r33 low side s2 ac line 
×
×
  • Create New...