Jump to content
SAU Community

Recommended Posts

Hi Fellas...

I've had a crack at the search function but it's a bit too vague I'm having trouble matching others' problem with this one.

First of all, this problem doesnt occur all the time. It seems to be pretty random.

After an aggressive shift into 2nd (and sometimes but rarely, right into 3rd as well) the entire car will shudder all the way through the gear. I'll feel it in my seat, its not a huge shudder but def. noticable. The car doesn't lose power throughout. Put it into the next gear and it goes away.

One thing of note, is I'm aware that one of my fear subframe bushes have ruptured (the Gel filled ones). I have the new part ready to go, but they are not in yet. >Could this cradle movement be a potential cause of the problem?<

Keen to hear if anyone has had a similar issue. Thanks heaps guys.

Andrew

does it feel like you have haps out of balance wheels?

mine does that. just the atessa cutting in while theres no need to. it shudders the whole car. just happens randomly when driving and go over a bump etc etc.

just lift the throttle and the torque will go back to 0

Hi Fellas...

I've had a crack at the search function but it's a bit too vague I'm having trouble matching others' problem with this one.

First of all, this problem doesnt occur all the time. It seems to be pretty random.

After an aggressive shift into 2nd (and sometimes but rarely, right into 3rd as well) the entire car will shudder all the way through the gear. I'll feel it in my seat, its not a huge shudder but def. noticable. The car doesn't lose power throughout. Put it into the next gear and it goes away.

One thing of note, is I'm aware that one of my fear subframe bushes have ruptured (the Gel filled ones). I have the new part ready to go, but they are not in yet. >Could this cradle movement be a potential cause of the problem?<

Keen to hear if anyone has had a similar issue. Thanks heaps guys.

Andrew

Check all drivetrain mounting points from the engine mounts back or clutch.

Edited by Spoolemup
no comparison to a GTR i know but my R31 started doing it when i put my rb25det in.....it turned out to be the centre bearing in the tailshaft.

food for thought.

how much did it cost for you to get this fixed?

I know completly different cars and all, but my old 83 telstar did the same thing. It got worse over time. It turned out to be the torsion springs in the clutch were shagged and the clutch needed to be replaced.

My two cents (might not help, or not be the problem. Just throwing it out there)

its definately not a traction issue? if not you need more power :P dont know if cradle movement will be the problem, but maybe its making a smaller shudder much worse... assisting the problem rather than creating it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ha ha, ended up going it alone.  I just sent it (in a very nervous fashion).  Once I'd released the locks and it didn't automatically start spinning out of control i felt a bit more confident.   It made some loud sounds (cracking and creaking noises) when I first spun it which got the heart rate going again!  I couldn't bring myself to leave it tipped on the side.  I feel a bit more comfortable having back right side up while it sits there. I'd get angry with your last point but you're 100% correct! 😅 Even yesterday I managed to distract myself at numerous times to make a bracket to fit an LED flood light off the back of the house and fix my sons pushbike.  There were other little taks nibbling at my brain for the rest of the day too...
    • Probably one of the more nerve wracking experiences of my entire life! 😂😂 The balance (centre of gravity) is out still but in a direction that gives me comfort!   It's quite bottom heavy still meaning it takes a bit of muscle to rotate it.  The plus side of that is that it wants to to go back to upright.  Better that than wanting to go all stranded turtle on me!
    • hmmm that's not ideal. This is a pretty new engine right, will be interesting if your engine guy has any theories about causes
    • A universal ball joint removal c press kit is better money spent and will work for the Hicas ball joints.  Here's a 45$ CAD Example. ATPEAM Heavy Duty Ball Joint Press Kit with 4WD Adapters | Professional 4 in 1 Ball Joint Press Removal and Installation Tool for Cars and Trucks | Universal Ball Joint Tool with Storage Case, Ball Joint & Tie Rod Tools - Amazon Canada
    • True on both points
×
×
  • Create New...