Jump to content
SAU Community

No Power To Headunit/amp

mrgilly

By mrgilly,
in Car Audio & Electrical

 Share

Recommended Posts

mrgilly Proficient

mrgilly

Posted
Posted

Hi all,

Took all my audio gear out to go to the track a while back, threw it all back in the other day and no go! Didn't think anything of it, til the other night I tried all the fuses I could find (audio under dash, inline from battery, amp, headunit). All seemed ok, so I tried pulling out and reseating every cable I could find. I went for a quick drive to pick someone up, came back to get back into troubleshooting, unhooked the battery and off we go.

I have an issue with my fine motor skills and sometimes I just drop things - once such incidence occured causing me to touch the rem line on either the pos or gnd outlets on the amp. I'm not sure which, I just know there was a spark. Instantly I dropped everything (literally) and checked the battery - stupid me in my rush had disconnected the terminal, but not secured it away from the battery and it was resting against neg...

After berating myself for being so foolish I set about looking to resolve any further problems I'd caused - only the fuse from the battery had blown - all others were OK.

I'm having a look at it now and I have no idea what else it could be? Are there any other under-dash fuses I should check?

Thanks in advance, I've spent quite a while on this and seem to be stuck :)

Link to comment
https://www.sau.com.au/forums/topic/150202-no-power-to-headunitamp/
Share on other sites
Howie Grand Master

Howie

Posted
Posted

Does your headunit power up? That'd be the first place to start as it's the source.

If not, check the acc/ign fuses under the dash. And if there is a fuse on the direct power line (usually yellow line) check that.. you may have to pull the deck out.

If the h/u does power up, check that the remote wire is working. On the amp end, check with a testing light to see the remote wire comes on when the headunit powers up.

If that does come on, and you're seeing battery power to the amp. Then see if the internal fuse on the amp is busted. If it is replace, if it ain't then you could have a dead amp.

Conversely, if the amp powers up, recheck the speaker leads.

mrgilly Proficient

mrgilly

Posted
  • Author
Posted (edited)

sky017: As mentioned above, I already replaced the fuse near the battery.

Howie: I've already checked the audio fuse, however I'll check more fuses under the dash... at the moment I have no HU power, let alone amp. I already have the deck out and can't find any inline fuse behind there. I've had the HU out a few times, the install was done by Gold Coast Car Sound, and I was never happy with it (they used shitty RCA's and were generally just wankers).

Thanks guys

Edited by mrgilly
Howie Grand Master

Howie

Posted
Posted (edited)

If you still can't find any blown fuses under the dash, take the h/u out - and run a testing light over the power & ign wires. If you're seeing power, it could be a blown deck.. but i say your chances of that are pretty low. Also check if your deck has an internal fuse.

edit: just read your updated post. Your 12volt power should always be fused - obviously because it's a live wire.

let us know how you get on buddy. cheers.

Edited by Howie
mrgilly Proficient

mrgilly

Posted
  • Author
Posted (edited)

I'll do the fuse testing in the morning, after losing patience with the car earlier I went back to building my server... now it's time to sleep.

I already checked the fuse in the back of the HU and it's fine.

The 12V line from the battery is fused next to the factory under-bonnet fusebox, if that's what you mean

Cheers

Edited by mrgilly

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Comfortable replacement seats for R32 GTR

      By Murray_Calavera · Posted

      As strange as this sounds (as they are fixed back), my Bride Xero CS seats are the most comfortable seats I've used.  I vote go genuine.  The only downside I've found is on very long drives, you can't reposition your body while driving. So even though its comfy, being locked in the same position eventually becomes uncomfortable. I find myself stopping every 3 or so hours to stretch my legs on long drives. 
    • GTSBoy
      My BMW E39 528i touring

      By GTSBoy · Posted

      You don't have to be bored driving a Camry. Not based on the way that a couple of f**king Ubereats/Didi/othersortofmethaddlednightshiftattheservicestationrecentimmmigrants were piloting them on the way to work this morning. f**k me dead!
    • GTSBoy
      Comfortable replacement seats for R32 GTR

      By GTSBoy · Posted

      FWIW, the Bride reps are really nice to sit in. The only complaint I have, other than the tear in my bolster, is that the velcro used to hold the backrest cushion in place, up under the headrest, is a little obvious and intrusive and could probably be done better. I don't know if that is a "feature" on the genuine ones also though. I haven't looked at a genuine one like the ones I have, only some of the older models. The other thing is, even though I bought the CF ones, I think the CF is really just decorative, over the top of the same FG as the normal seats. And so they really aren't light. Between the solidly built CF/FG seat, the steel frame in the recliner mechanism, and the solid-arse seat rail, they are probably heavier than even the stock seat. They are a serious lift to get in and out of the car.
    • GTSBoy
      ugently need expert / experienced opinion

      By GTSBoy · Posted

      Yes, and so the barest minimum power target is the one that makes the most sense. Massive power is fun, but you can only use it for 1.5s at a time, and only every now and then. Medium power levels allow you to enjoy the car far more often and for longer. 500 engine HP is just below 300 rwkW which is about the maximum that is sensible for any street car really. And for a 2.6L six, it will still leave you with a decent boost response and some sort of linearity of power delivery. As you get up towards 400rwkW the onset of power tends to be increasingly like a cliff and you need drag radials to keep the ground in proper contact with the car, and.... it's just not a car for driving around any more.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I already reached that conclusion myself after reading up a whole bunch and watching various videos from multiple sources. Don't know yet how I'd best manage that with the least amount of headache. Probably pulling the sump and just welding on a AN10 adapter or something. I also think it's healthy to take most opinions with a grain of salt, because experiences differ wildly and especially Aussies - when talking about RBs - don't know a world below 600whp drag builds. Personally I doubt I will ever take my R33 racing, so it's going to be a street car with the occasional spirited drive. Hence why I am (so far) under the impression that I'm going to be fine with a stock-ish engine for a while.
×
×
  • Create New...