Jump to content
SAU Community

Defect

MichaelB

By MichaelB,
in South Australia

 Share

Recommended Posts

MichaelB Explorer

MichaelB

Posted
  • Author
Posted

haha,

I forgot 3" exhaust

How hard are these things to remove

Gauges I can take off myself, do you need to remove the associated cabling aswell to pass regency?

Blow off valve and exhaust I will have to get removed at a shop, and replaced with stock

Suspension? can I simply have it raised or do I need to remove adjustable shocks and replace with stock?

Link to comment
https://www.sau.com.au/forums/topic/150440-defect/#findComment-2801471
Share on other sites
Cubes Grand Master

Cubes

Posted
Posted

3" Exhaust..

Get a coke can and chop it up to the flange shape. Then drill a few large holes in the sucker. Silicon it all up place it behind the cat. Wait for it to dry then run a bit of grease and oil in to it and get it hot to make it look a little aged. >_<

Link to comment
https://www.sau.com.au/forums/topic/150440-defect/#findComment-2801519
Share on other sites
Ryanrb25 Grand Master

Ryanrb25

Posted
Posted

all depends what sort of suspension you have, if they are adjustable platform coilovers then you can wind them up but still have the risk of them not going through becauase coilovers are illegal, however when my 33 came over from japland my coilovers went through ok.

most of them time, if your guages are below the dash line then theyll be ok, keep tread on your rears, not too low, not too loud, dont be stupid on the road and they'll be ok about it

Link to comment
https://www.sau.com.au/forums/topic/150440-defect/#findComment-2801595
Share on other sites
DC_GTST Experienced

DC_GTST

Posted
Posted

If this is you Mick, give me a holla and i'll give you a run down. And if you have bought a skyline, fly around sometime -> doing the speed limit that is :)

btw..has it got a defect, or you just asking? as most have written, most likely everything, and depending on how they're feeling at regency

Link to comment
https://www.sau.com.au/forums/topic/150440-defect/#findComment-2802027
Share on other sites
DriftR_33 Rising Star

DriftR_33

Posted
Posted
i know the legal hight is 360mm,need stock plenum,NO bov doesnt matter if its plum back,no fuel regulators list goes on and on and on i was there yesterday aas i got defected for tint and boost gauge..

really because i have my boost gauge mounted on my dash, beside the stereo. i hvae had my car defected twice

during my defect saga. there has never been any attention on the boost gauge.

more attention on abs, rear wheel steering and engine emissions... :laugh::D:(:):)

Link to comment
https://www.sau.com.au/forums/topic/150440-defect/#findComment-2806505
Share on other sites
Cubes Grand Master

Cubes

Posted
Posted
Plum back bov is a std piece of equipment and must be in along with all piping and recirc. hoses...

Aftermarket bov's are not allowed.

The same as what I was told... The afm to turbo pipe, cross over pipe, the std bov and its pipework cannot be touched. FMIC is allowed providing there's no cutting of the body and it doesn't hang lower than 100mm.

Link to comment
https://www.sau.com.au/forums/topic/150440-defect/#findComment-2808556
Share on other sites
NV-MY-R33-GTST Newbie

NV-MY-R33-GTST

Posted
Posted
Hey Guys,

Wot in SA do the cops defect u 4. I have moster tach, shift light, boost gauge, blow off valve, adjustable suspension (now low).

if it is a brand new exaust you should of got a silencer with your rear muffler otherwise known as the cannon wich passes you through regency as i have just passed with a 4 1/4 hiflow exhaust system

and bassically everything in which you listed in your last quote i got done for as well not to mention the rest.

let us know if you ever need to borrow a silencer.

Link to comment
https://www.sau.com.au/forums/topic/150440-defect/#findComment-2812146
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Shockabsorber 101

      By GTSBoy · Posted

      KYBs are typically twin tube, putting them in the lower tier of desireability. Do you just want to replace worn out ones for the lowest cost? I mean, you wouldn't just replace one end of a car, if the rears are a similar age to the fronts, then they are probably nowhere near what they should be, and likely won't be great against brand new fronts. So, to spend ~$800 on 2nd tier dampers, when you could get a decent set of MCA coilovers for <$4k.....? As to the strut tops. 1st up, the Sparesbox site specifically tells you that they are not correct for an R33. Beyond that, why do you think you need them?
    • Dose Pipe Sutututu
      High temp brake fluid?

      By Dose Pipe Sutututu · Posted

      That's not very Toyota of the Toyota!
    • benl1981
      Shockabsorber 101

      By benl1981 · Posted

      Bringing an old thread back to life Looking to put some new front shocks in the r33Gtst and the KYB still look ok for a road car. Unless there are any other options aroind that price $200 a shock?  I’d like to replace the strut tops also, is this the correct KYB no. For the strut top, KSM7124?  https://www.sparesbox.com.au/products/kyb-strut-top-mount-ksm7124?srsltid=AfmBOoq-HDru8wSlLnQrhU9gCw_uYdKg8gUQzONY-EQOdnI5iXOWEUjY 341287 appears to be the front KYB shocks part no.  thanks all   
    • MBS206
      High temp brake fluid?

      By MBS206 · Posted

      LandCruiser used to get a fluid flush every 12 to 18 months.   Only because it was about that often the electric motor on the master for brake assist kept dieing and needing to come off.
    • Murray_Calavera
      High temp brake fluid?

      By Murray_Calavera · Posted

      lol I thought I was bad 
×
×
  • Create New...