Track Alignment Settings

[simmyb]

wondering if anyone has track settings for the camber, castor and toe on an r32 gtst?

as i am looking for a optimum setting?

specifically the castor as i have adjustable castor arms...

i am running tien super streets, with front non-adjustable aftermarket camber arms (alot of camber)

Any suggestions...

[Nathan_G1]

bout 9 degrees castor mate, ran that on my 32 and it was frikn awesome, if your camber arms are non-adjustable they-re setting should be good......but i suggest adjustable ones to be your next buy for front and rear.

a decent camber setting is 2 degrees at front and 1 at rear.......you can go a little more at front but try 2 degrees first. make sure your tyres are grippy as well, hard compound tyres are terrible and will cause some un-wanted understeer......

[simmyb]

thanks mate.

my non adjustable camber arms have like 3-4 deg neg camber!

we'll see how it goes.

[jazzantt1]

thanks mate.

my non adjustable camber arms have like 3-4 deg neg camber!

we'll see how it goes.

Camber front -2'30

Caster 8-9 degrees keep them even. Any more then you might have to start thinking about ackermans law.

toe 1-3 mm toe out total.

rear camber -1'45 to -2'30

rear toe. toe in 1-1.5 mm per side.

[Gts-t]

Front

Camber 2.0 neg per side

Castor max with whiteline kit around 6 i think.

Toe 1mm out each side

Rear

Camber 1.5 neg each side

Toe zero each side

Next ill try 2mm toe out each side at the front