Jump to content
SAU Community

Recommended Posts

Hello people, im off to willowbank in a few months and i have been told that if your car runs quicker than 11.99 or 110 mph you need a 4 point harness and a tailsharft loop fitted.

Where is the best place to purchase and get fitted, and what is the expected price i should pay for these items, Thanks. : :laugh:

Link to comment
https://www.sau.com.au/forums/topic/150789-4-point-harness/
Share on other sites

Hello people, im off to willowbank in a few months and i have been told that if your car runs quicker than 11.99 or 110 mph you need a 4 point harness and a tailsharft loop fitted.

Where is the best place to purchase and get fitted, and what is the expected price i should pay for these items, Thanks. : :laugh:

Hi mat eog to revolution race gear at marooka, speak to brendan, tell him lloyd recommended you to go there. Brendan my best mate he is very knowledgable with exactly what u need for all the different classifications of racing. u can call them on 3392 6100 but i recomend going there in person.

they have a good range of harnesses in stock.

Oh and he can also tell u for sure if u need a harness, cage, tailshaft loop etc.

Link to comment
https://www.sau.com.au/forums/topic/150789-4-point-harness/#findComment-2806537
Share on other sites

Hello people, im off to willowbank in a few months and i have been told that if your car runs quicker than 11.99 or 110 mph you need a 4 point harness and a tailsharft loop fitted.

Where is the best place to purchase and get fitted, and what is the expected price i should pay for these items, Thanks. : :/

You'd be unlucky to get picked-up on this - I've never seen it policed (different story if you run a 10 though).

Link to comment
https://www.sau.com.au/forums/topic/150789-4-point-harness/#findComment-2808125
Share on other sites

Thanks for your help guys, i have done a bit of looking around today i can get a monza 4 point harness for 95$, with ADR certificate. I will give revolution race gear a call too, thanks.

Link to comment
https://www.sau.com.au/forums/topic/150789-4-point-harness/#findComment-2808168
Share on other sites

Ive run many at and over 110mph trap speed and never been pulled up for having a standard seat belt...!!!

I think Rhinorebel and I both ran a 115mph on our first run at the SAU TnT night last year side by side all the way with i think a couple of tenth's of a second between us...

I won tho and thats what matters... :)

Maby a competition level they might be strict on it, but at TnT's they are very casual... But let us know what your harness costs as im thinking about one for trackday as i float around in my seat and keep hitting my helmet on the roof... :(

Link to comment
https://www.sau.com.au/forums/topic/150789-4-point-harness/#findComment-2812072
Share on other sites

Ive run many at and over 110mph trap speed and never been pulled up for having a standard seat belt...!!!

I think Rhinorebel and I both ran a 115mph on our first run at the SAU TnT night last year side by side all the way with i think a couple of tenth's of a second between us...

I won tho and thats what matters... :)

Maby a competition level they might be strict on it, but at TnT's they are very casual... But let us know what your harness costs as im thinking about one for trackday as i float around in my seat and keep hitting my helmet on the roof... :wave:

Bought the monza 4 point for $90 with bolts and adr approved. :huh:

Link to comment
https://www.sau.com.au/forums/topic/150789-4-point-harness/#findComment-2813106
Share on other sites

11's they arent strict, however if u run a 10 without the proper equipment, they will tell u to leave and they will remember u for next time

QLD raceway never remember...

Which is a good and bad thing i guess.

Link to comment
https://www.sau.com.au/forums/topic/150789-4-point-harness/#findComment-2828975
Share on other sites

Ive run many at and over 110mph trap speed and never been pulled up for having a standard seat belt...!!!

I think Rhinorebel and I both ran a 115mph on our first run at the SAU TnT night last year side by side all the way with i think a couple of tenth's of a second between us...

I won tho and thats what matters... :)

Maby a competition level they might be strict on it, but at TnT's they are very casual... But let us know what your harness costs as im thinking about one for trackday as i float around in my seat and keep hitting my helmet on the roof... :O

What times did you end up running at 115mph Col.

Link to comment
https://www.sau.com.au/forums/topic/150789-4-point-harness/#findComment-2830856
Share on other sites

What times did you end up running at 115mph Col.

Found the slip, It was actually 120mph to be honest and this is my fast run i have done to date. However im going back next month with my new GT30 high mount and 300rwkw, we will see if i can punch the 11's...

COL (242rwkw - GCG Highflow turbo)

60 foot - 1.853

12.264 @ 120.68mph

(Sep 06 - 16 degres, 86%H)

I did fine my time slip from when i went up against rhinorebal...

Both cars at the time had 200rwkw running street tyres and pulp, this was July last year...

COL (198rwkw - Stock Turbo)

60 foot - 1.997

13.4 @ 105.36mph

Rhinorebel

60 foot - 2.450

14.07 @ 104.75mph

(July 06 - 18 degres, 80%H)

Link to comment
https://www.sau.com.au/forums/topic/150789-4-point-harness/#findComment-2830925
Share on other sites

Did you have much wheel spin when you ran the 12.2 at 120mph

Nah it was a pretty clean run... Probablly one of my better launches too...

My car either boggs down or fry's the tyres, there is not good inbetween. So im hoping to get my hands on a set of ET slicks before hitting the strip again...

GT30 high mount, sounds like you should crack the 11s

Yeah my goal is 11 on street tyres and 10's on slicks...

Should make it there on an RB25 before i blow it up and go the RB30 bottom end...

Link to comment
https://www.sau.com.au/forums/topic/150789-4-point-harness/#findComment-2831505
Share on other sites

I was reading a topic in forced inductions and there is guy there that claims he has 591HP that ran a 10.8 at 129mph, i thought it would go quicker than than that or is that about right.

Link to comment
https://www.sau.com.au/forums/topic/150789-4-point-harness/#findComment-2832022
Share on other sites

Its all in the setup of the cars suspension and the type of tyre you use... Power is needed of course but you need to get that power to the ground...

If its a full street setup and you have 500hp+ then your probablly just going to fry the tyres for half the track...

Link to comment
https://www.sau.com.au/forums/topic/150789-4-point-harness/#findComment-2832060
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...