Jump to content
SAU Community

Law On Where Number Plates Should Be Mounted?


Recommended Posts

there used to be a doc on vicroads website explaining this... but i can't find it.

since when did they move to crappy scanned PDFs instead of printed PDFs so you can't use the search function??

damn fools

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

LOL The same thing happened to me for mounting my plate on the left side.

I told the cop I check with vic roads and got the all clear.

Well he had nothing and let me on my way.

That’s bullsh!t dude, I hope that its all cleared.

3 Points for having a side mounted plate is rubbish.

Good luck.

after you have taken them to court and won easily, remember to claim every expense that is owed to you.

Also a letter to the Office of police integrity would be a great idea.

A black mark on an officers file will last a lot longer than a defect of bull***t charge on your car.

where are the number plates on an australian delivered FD RX7 positioned in factory form?

Is a good point and I kept my eyes open today. Spotted a silver stock looking one on coming off the freeway onto Kings way this evening, they are center mounted. Whether that was a ADM I'm not sure but was stock from the outside.

My car's factory position is similar to yours (except on the Left Hand Side).

Can't see how position (so long as it's clearly visible and no lower than the factory item) would matter?

My car's factory position is similar to yours (except on the Left Hand Side).

Can't see how position (so long as it's clearly visible and no lower than the factory item) would matter?

ours is in this position and is even a sticker and we have never had trouble from the police.

but Vic cops have a bad attitude from what ive heard.

post-23582-1168480990.jpg

what do you have to do to claim your expenses?

Prove them

Your lawyer will know all about it.

You wont get "ALL" your expenses paid for.

Just lawyers fees/court costs etc.

Your time off from work generally is pushing it too far, sometimes you will get awarded your asking amount, othertimes the judge will make it what he see's fit.

If you settle out of court, the prosecutor can agree to the costs to be paid, but they will be substancailly lower as it never made it into the court room (which is what i will suspect will happen here)

ours is in this position and is even a sticker and we have never had trouble from the police.

but Vic cops have a bad attitude from what ive heard.

yeah that's the same as my mate's car and never had a prob with it aswell.

post-31699-1168498385.jpg

fark seriously how unfair can ya get.

Moving the plate to another position is legal as long as it is visible from 2 metres away 45 degree angle. Sticker plates are not legal because they are not a numberplate at all. I got done doing 35km/h over the speed limit by a camera but got off it because i have stickers on the car instead of plates. I then had a cop come to my house and fine me for not displaying plates.

Here is some infor that Austrlian car manufactures must follow to for ADR.

Had a look at the ADRs. ADR 61-02 says that for all vehicles other than L class (Passenger cars are MA class) the licence plate must be parallel to and forward of the front axel and no more than 1300mm from the ground. Subpart 2 of the ADRS (which contains all the definitions of terms) defines an axel as follows,

One or more shafts positioned in aline across a vehicle, on which one or more wheels intended to support the vehicle turn.

The above is the basis for all laws in each state.

Ash is right. You will win in court.

Even if you just take an extract from the ADR's or a Vic Roads PDF along with you and represent yourself, You will still win.

So sign the back of the fine and send it in now. Don't let superman T.M.U push you around.

yeah u should win this...in fact I would be suprised it goes to court at all.

I put down $100 its dropped once they look at it...you might need to go on the day but once your sol. talks tot he cops they will not bother in court.

But if they do, u have a strong chance. I would go with proper representation cos you wont need to pay for it in the end if you win.

from what ive heard as long as its clearly on the front of the vehicle and is perpendicular to the road its fine... but police discresion and hard to understand laws, these kind of things often become tricky.. you should be allright though, good to see wonderful police resources were being used to fine you for your number plates, whilst a real crime was being commited only to find police resources tied up in other locations for things such as these!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The max they would go for me is 50.
    • That cannot have been a fun set of drilling. The stock "baffle" looks identical to rb26, I just cut fuel cell foam to fit the full length under the baffle.
    • I understand your sarcastic exasperation. But to be fair - the baffles do indeed fit OEM cam covers. They did omit to say that you need to do a bunch of stuff. But they do fit them.
    • Got started on the modification to make these splash plates fit over the long weekend. First the surprisingly time consuming task of swapping all the cam cap bolts to Tomei cam cap studs. I did the method of removing one bolt at a time, applying loctite to the stud, double nutting to torque as the manual described. Then carefully unlocking the nuts without disrupting the torque of the stud (and going back to re-torque a few times when it slipped). Finally applying the nut and torquing to spec. Repeat x28 Next up I went about removing the stock cam cover baffle so I could ensure it was fully clean after drilling for stud clearance.  As the blind rivets holding the baffle on were domed I used a punch to mark the center then used 4mm drill bit to carefully drill out the rivet without going too far part the baffle. As seen in other thread here is what is inside the stock baffles I decided on M4x6mm bolts to bolt the baffle plate back on with. I used a 3.3mm drill bit with some tape to mark the depth at ~8mm. Next was to tap the threads using a cheap bunnings kit M4x0.7. With the baffle removed I also drilled out the spot welds holding in the baffle plate oil returns. Unsure whether this was the best option or if I should have cut holes in the Hypertune splash plates to allow the oil drains to still function... time will tell. I then removed the the Hypertune splash plates so I could rest the cam cover on top and use a dab of grease to mark where the studs impacted the oem cam cover baffle. The most obvious spot was on the hump from the stock mesh is held. Using this hole as an anchor I bolted the oem baffle plate back into the cam cover and lined up the Hypertune splash plate. Marked the rest of the holes for the studs and drill those out too. Total 32 holes drilled and 12 threads tapped on the passenger side cam cover alone for this bolt on part that totally clears all OEM cam covers.. Drivers side next as well as some E85 safe fuel foam to fill the space behind the behind cam cover baffle plates. oh and some lock nuts for the splash plates of course.
×
×
  • Create New...