Jump to content
SAU Community

Rb25de, Rb20de & Rb30e Coby Extractors/headers Group Buy #2


Recommended Posts

since some people have asked me to run a 2nd group buy, here it is.

1989-98 Nissan Skyline - RB20, RB25 DOHC - 1.5" Primary, 1.75" Secondary, 2.0" Outlet

post-9983-1168424663.jpg

this is the supplied picture of the extractors by www.partsco.com

post-9983-1168424706.jpgpost-9983-1168424716.jpgpost-9983-1168424726.jpgpost-9983-1168424739.jpgpost-9983-1168424749.jpg

these are my extractors from group buy #1 (2.5" outlet with hpc coating)

1-3 buyers

D12 rb20/25de headers (AUD$225)

D5 rb30e headers (AUD$225)

F124 gasket (AUD$15)

4+ buyers

D12 Headers (AUD$185)

D5 rb30e headers (AUD$185)

F124 gasket (AUD$15)

hpc coating

one set of headers (AUD$170)

shipment options

international express, 1-3 days (AUD$100.00)

international air, 3-6 days (AUD$70.00)

international economy, 10-15 days (AUD$60.00)

*gasket is optional but recommended.

*varying outlet sizes can be welded on for you can have 2", 2.25" or 2.5" (please specify which one you want)

this group buy will begin now and run for approximately 3 weeks ending on the 2nd of february.

full payment will be required by the 2nd of february.

the order will be made on the 5th of february.

if the previous group buy was anything to go by, it will take approximately 1 month from date of order to your door step. this is of course dependent on delivery method, hpc coaters, and the actual time it takes for coby to fabricate them. these headers are coming from new zealand.

any questions ask away.

note: only say so if you are 100% in, a group buy only works if purchased in bulk.

cheers

eug

instructions:

- i require everyone to state how many they wish, the outlet size, gasket, hpc, and delivery method.

- i will also require full payment from everyone, as i will make the transfer.

- i will then place the order with partsco.com once everyone has paid.

- i will also confirm the order with everyone by pm.

purchasing

Midg3t: 1x d12 extractors, 1x gasket, 2.5" outlet, international air

chicane: 1x d12 extractors, 1x gasket, 2.25" outlet (to be confirmed), hpc coating, international economy

baldbeno: 1x d12 extractors, 1x gasket, 2.5 " outlet, international economy

brentmcd12: 1x d12 extractors, 1x gasket, blue paint, 2.5" outlet, international air (from r31skylineclub)

Breathless: 1x d12 extractors, 1x gasket, 2.5" outlet, international air

Breathless's Friend: 1x d12 extractors, 1x gasket, 2.5" outlet, international air

M3X: 1x d12 extractors, 1x gasket, 2.25" outlet, international air

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

sorry should have replied here instead of the old thread. =)

holyevil:

Rb25DE Header - 2.5" outlet

HPC coating

Gasket

International Economy

Thanks for doing this EUG

pm replied.

assuming everyone on the list goes through with the buy, we are now eligible for the more discounted price.

just a reminder that the buy ends of feb the 2nd.

Sorry guys i'd have to opt out of this group buy altho I REALLY REALLY want it =(

as per this thread http://www.skylinesaustralia.com/forums/in...howtopic=151678 I got rear ended, let the guy off cuz I thought the damage was little.. then found out it's several thousand dollars worth of damages (internally like rear support, boot not closing properly etc), luckily I've got insurance and would have to pay 1.4k for the excess (+some extra) so have to opt out of this group buy for now..

Very very sorry about making you guys havin to pay more for the extractors

hopefully I can do it in the next group buy if there is one..

p/s-remember to ALWAYS take num of the one who hit you no matter how small the damage seem.

sorry to hear buddy - hope you get your car fixed. it is totally understandable that you have other priorities.

that brings the group buy back down to 3 people.

i'm sorry guys, but i never intended to run a 2nd buy. however about 10 people have requested that i run another one.

bottom line is, they wont work without your support. alot of talk and no action.

i am happy to help other members out, but don't waste my time - i do not make money out of these, infact i lose money due to transfer fees and international phone calls.

those on the list - i appreciate your support. it is the others that have let you down. i will let this play out till feb 2nd, and i will see if they will allow you guys as an "extended" buy off the first one or something if we cant meet the quota.

regards

eug

  • 2 weeks later...

i'm not too crash hot with that r31skylineclub buyer, but i have sent an email a few minutes ago asking quotes for 3 buyers and 4 buyers respectively (see first post).

i am quite disappointed with the others who have wasted my time and money.

will hopefully know by late next week and let the ones who are serious know. read the forums for updates as that is where i'll communicate easiest with most people.

Hi Eug,

after much deliberating... COUNT ME IN!

chicaneR33

Rb25DE Header - outlet size - just need to check.

(I have i think 2.25" cat back - To Be Confirmed)

HPC coating

Gasket

International Economy

Let me know who to get the money to and when!

alright guys, i've got the majority of the orders.

just chasing up some final amendments from some people regarding their outlet sizes.

when they can finalize those with me i will provide you all with my bank details and confirmation of the order and we will see this through.

please be patient.

cheers

eug

ok guys.. just got off the phone with partsco.

prices are as seen in the first post.

i will PM each of you later tonight with your order and the total and my account details.

if you could confirm EVERYTHING (please double check) and provide me with a delivery address.

let's make this a textbook transaction.

cheers

eug

PM's have been sent... please confirm and reply to be if there are any discrepancies.

cheers

eug

Eug: Funds transferred, thanks for organising this.

Regarding getting these installed, whats the going rate for an exhaust shop to install?

can i also ask that everyone provides me with a detailed delivery name and address. since these are coming internationally i suggest:

Name

# XXXX Street,

Suburb Postcode

City, State, Australia

this way it prevents any confusion and minimizes mistakes.

chicane: i had mine installed at a reputable exhaust place.

here's a breakdown of what i did.

- install headers and flange welded on

- replace all manifold bolts

- fit new catylytic convertor - tig weld temperature sensor and 2 flanges welded on.

- appropriate gaskets for the cat

- fit catback exhaust

- and removal of the standard one.

total = $250 and took about a few hours.

*this is not inclusive of parts.

the catback exhaust i already had, and i bought the cat convertor for $140

hope that helps

Hey guys,

Eug wanted me to post and let everyone know that he cant get online at the moment. His modem has died and he should have a new one and be back online by the end of the week. If anyone needs to get any messages to him in regards to this group buy i can pass them on, so either message me thru here or [email protected]

Cheers

Jamie

thanks jamie,

guys i am online just very quickly - i have temporarily borrowed a modem. i've just checked my account and we are awaiting on 1 (one) more payment. there is also a payment in there without an id reference.

now it's either Midg3t's or M3X - one of you has paid, and one of you havent.

please get in contact with either myself or DrPsi (see above post) to confirm if you are in or not.

cheers

eug

ok guys - sorry for my lack of presence, i'm borrowing the internet so to speak.

mig3t's payment has been recieved.

and i am awaiting on the 2nd half of m3x's payment to clear.

as soon as that comes through - i will place the order to partsco.

cheers

eug

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
    • I have a r34 sedan 1999 manual converted need some help with my speedometer it only reads upto 98km and then stops currently still running the auto cluster any easy fixes no speedo drive is connected yet, if someone has a video for wiring up the manual speedo sensor with the auto cluster please send through 
×
×
  • Create New...