Jump to content
SAU Community

Ford Xf Throttle Body And Powerfc

pavel

By pavel,
in Engines & Forced Induction

 Share

Recommended Posts

RB20/30Det_VL Enthusiast

RB20/30Det_VL

Posted
Posted

mate u need to make a bracket its easy, get a 3-4mm thick piece of metal about 20mm wide and about 120mm long measure the distance and mark the holes where needed, use a 5 or 6mm drill bit for the mounting holes and a 14mm drill bit for the centre hole then bolt it on and measure the resistance at open and closed and adjust, connect it up and check voltage at open and closed.

those measurements are off the top of my head dont quote em

drill bits are right

StockyMcStock Proficient

StockyMcStock

Posted
Posted

agreed, do that ^^^

just check to see which way it all opens etc, you'll figure it out. the TPS has an arrow on it showing closed to open direction. it is the same as the XF throttle body, but opposite to the RB25 one.

if the shaft does not fit inside the TPS, you need to file a flat section in it until it fits snugly on. i've heard that some XF shafts need this to be done.

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32GTR R200 reverting from Nismo centre to stock

      By GTSBoy · Posted

      I like it when the counter chick leads you out the back into the racks and says "have a grub around in here and see if you can find what you need. I'll be back in a few minutes. Just left me in front of a massive motorised shelving system and 2-3 million fasteners, so I could find a peculiar SS shoulder bolt with cap head. Gotta love country towns.
    • Piggaz
      R32GTR R200 reverting from Nismo centre to stock

      By Piggaz · Posted

      I used this https://osgiken.com.au/product/os-giken-os-250r-lsd-gear-oil-80w250-1-litre/   shut my nismo 1.5 pro up by heaps…. Not silent though. Gives the car character and personality. It ain’t a carolla. If you want silent, put a quaife in it.
    • MBS206
      R32GTR R200 reverting from Nismo centre to stock

      By MBS206 · Posted

      It's about the same time for me from Bunnings, or the Fasteners. My big push away from takeaway food, and gluten in general keeps me away from the Bunnings Snags too! Weather up here, I've been out for two walks today in the beautiful sunshine. Had a few little drizzles, and some wind, that honestly, a tin of beans and I could compete on how harsh she blows Thankfully, being this bit inland, we're not getting anything much really. Will probably pick up a bit more when/if Cyclone Alfie decides to come ashore. A few areas in the GC though, and south into NSW are really getting smashed though! Right now, I'm just annoyed Alfie hasn't hit, as I'm not allowed to crack into the BBQ foods like the bacon and eggs until the Cyclone hits "In case we lose power"...
    • The Bogan
      R32GTR R200 reverting from Nismo centre to stock

      By The Bogan · Posted

      I love fastener joints, the price difference between them and joints like Bunnings or Super Cheap is amazing, and they either have exactly what you want, or they can get it to quick They have even given me some for free when I only needed a couple of specific size In saying this, I have paid premium for fasteners from Bunnings if they have the sizes I need, but only for convenience really, as my local is only 10 minutes away, the Sushi joint near them is also a consideration  How's the weather Matt? Stay safe mate
    • joshuaho96
      R32 update from 1990's spec.

      By joshuaho96 · Posted

      Wideband is worth setting up if only for tuning purposes. I would not mess with the ignition system unless there's a misfire. HKS crank trigger is popular out here for the relatively easily sourced Denso crank sensor, not a bad idea to install as well regardless of power level on a standalone. Boost leak test is worth thinking about. Oil pressure sensor tied to a fuel cut isn't a bad idea either. Getting the tune figured out is a good idea. Without putting eyes on it and getting under it there's no way for us to tell you exactly what it needs but most likely you're down to the last 10% that will make a big, big difference in how happy you are with the car.
×
×
  • Create New...