Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

who here has the 80G and 80AU?

what is the difference?

what is ultra sonic?

what would you guys reccomend?

thanks

Personally I prefer Autowatch 446 Premier with built in turbo timer.

As for ultra sonics these are usually a 2 piece system mounted on either side of the dashboard, 1 of them is a transmitter the other is a reciever and an ultra sonic beam (high frequency sound wave) is transmitted from i to the other, if the beam is broken by an object such as an arm the alarm is triggered. If I had to choose I would pick ultra sonics instead of microwave sensor but definately a shock sensor is needed if you want to save your wheels!

Goodbye :rant:

Ditto for the M80S...

Ultrasonics are a pain in the ar5e if u ask me... constantly false alarming to the point that you have turned the sensor down and might as well not have it at all......

  • 2 weeks later...
Ditto for the M80S...

Ultrasonics are a pain in the ar5e if u ask me... constantly false alarming to the point that you have turned the sensor down and might as well not have it at all......

hmmm, the m80s comes with shock sensors, ultrasonic sensors r optional. Ive got a m80g, same as m80s but with glass break sensor. I get false alarms also. You sure its not the shcok sensors that r causing it?

hmmm, the m80s comes with shock sensors, ultrasonic sensors r optional. Ive got a m80g, same as m80s but with glass break sensor. I get false alarms also. You sure its not the shcok sensors that r causing it?

glass break is set a tad too high. common problem I have with them after I set them to my liking.

glass break is set a tad too high. common problem I have with them after I set them to my liking.

hey, audio express from caa right?

Were abouts is the control for the glass break sensor? On the module?

I think all Mongoose m80 series come with 2 stage shock sensor as standard.

I had the m80AU fitted about 3 weeks ago.

Couldnt be happier.

ultrasonic are high frequency waves being sent around the inside of the car. If something gets in the way of the bouncing signals they set off the alarm.

Basically, if you have the window down and you stick your hand through the alarm will go off.

Reason I chose:

If car has tinted window's and window is popped out, glass break sensor may not hear.

Sensitivity:

I think it is perfect. A lot of people say its too sensitive but majority dont even have the system..Not once have I had a false trigger from the sensors.

I also had window sunshade stuck on window, one side detached and didnt trigger the alarm.

I paid an extra $40 when compared to glass break sensor and I guess its worth it for such a low price difference.

I was planning on getting microwave sensor but the alarm person talked me out of it, not sure why, thought it would be better having a chirp if someone looks through window. I think it may cause too many false triggers if people walk past etc..

yup... i am getting the M80AU installed on saturday by the guys at Platinum PPI. Gave me a very good deal so i will let you all know how it goes.

http://www.platinumppi.com/accessories.html

take a shot under the dash when you are done and I'll see if I can find the unit :no:

take a shot under the dash when you are done and I'll see if I can find the unit :no:

I had a look at my Girlfriends Celica on the weekend, her shock sensor was set way too high. Pulled down the main panel under the steering wheel, and there was the black box, nice and easy to adjust, way too easy!

Would a good place to hide an alarm module be on the passenger side, up underneath the dash as far up as possible? Or does it not matter, because you can look around for additional wires and follow them back?

I had a look at my Girlfriends Celica on the weekend, her shock sensor was set way too high. Pulled down the main panel under the steering wheel, and there was the black box, nice and easy to adjust, way too easy!

Would a good place to hide an alarm module be on the passenger side, up underneath the dash as far up as possible? Or does it not matter, because you can look around for additional wires and follow them back?

Chris, what's your recommendation for hiding it...?

not going into detail but right out of mind and out of sight.

worked on one today that I could have stole the car in less than 30 secs becuase it was such a sh1t job...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • OK, that is a helpful description, because that sounds exactly like a bleeding issue in the clutch....these are hard to bleed manually even when the damping loop has been removed. I'd suggest bleeding again....start by filling the master cylinder up and opening the bleed nipple. Come back and check every now and then that the master cylinder is not empty. Let it gravity bleed for a few hours and see if that improves
    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
×
×
  • Create New...