Jump to content
SAU Community

Recommended Posts

After having fixed a dry solder joint in my AFM tonight(Most likely from the heat I'm about to talk about) I noted that the engine bay gets damn hot and stays hot for a long time (Series II R33 GTR). With this in mind I'm wondering if anyone has endevoured to vent the bonnet or purchase a vented bonnet with the aim of reducing engine bay temps and hopefully prolong component life. I'm not looking for huge rice vents, just options on something practical.

What are peopls thoughts on this idea, do you run the risk of allowing rain/debris/dust/dirt etc into the engine bay in larger than normal amounts, is there a real temp drop as a result, what have people done if they've pursued this idea (pics would be great too).

Thanks all

Link to comment
https://www.sau.com.au/forums/topic/151325-bonnet-venting/
Share on other sites

  • Replies 68
  • Created
  • Last Reply

Top Posters In This Topic

I had a Carbon fibre vented bonnet and that kep my temps down and also had a inlet over hte air filter. When i went to a standard bonnet i felt the car was not as responsive prob due to no air intake vent. i aslo found on hot days the temp needle ran higher. I have no issues whit dirt or water.

Link to comment
https://www.sau.com.au/forums/topic/151325-bonnet-venting/#findComment-2816241
Share on other sites

I was think bout getting a vented bonnet but i was wondering about driving it in the rain, say if u stop at the traffic lights or something where the engine is gonna be hot does the rain running down through the vents directly onto the engine cause steam or anything?

I also know your no ment to directly cool a hot engine incase some cracks goin from hot to cold that quickly

Link to comment
https://www.sau.com.au/forums/topic/151325-bonnet-venting/#findComment-2816490
Share on other sites

look up the 270R 200sx tuned by nismo

have a look at what they did it would be hard to spot if yor painted the whole lot in the factory colour

the hole I cut is very small and only just behind the radiator shroud and stops just before the rocker cover

hmmm maybe dont have a look lol

just refreshed my memory and its not how I remember it

my advice cut hole in bonnet not frame no one likes a floppy bonnet

fill hole with mesh paint mesh black tada

function without the wank

Edited by 1400r
Link to comment
https://www.sau.com.au/forums/topic/151325-bonnet-venting/#findComment-2816516
Share on other sites

Well what some people do is place a number of washers where the hinge bolts on effectively lifting up the rear of the bonnet letting air escape out the back. You may also need longer bolts.

You could do this before a track event and then put it back to stock afterwards.

Link to comment
https://www.sau.com.au/forums/topic/151325-bonnet-venting/#findComment-2816771
Share on other sites

Mmm. I think that would look a bit wierd personally, someone got some pics?

Yes it looks weird. Heat isnt a problem on the street when you're talking a turbocharged engine of course theyre going to get hot. It's good to keep things cool yes but the engine bay has been designed with a higher temp in mind from the factory.

On the track where you're seeing a great deal higher temps is when you need to worry about it and think about getting temps down or moving air around or keeping heat inside the exhaust etc.

Link to comment
https://www.sau.com.au/forums/topic/151325-bonnet-venting/#findComment-2816794
Share on other sites

After having fixed a dry solder joint in my AFM tonight(Most likely from the heat I'm about to talk about) I noted that the engine bay gets damn hot and stays hot for a long time (Series II R33 GTR). With this in mind I'm wondering if anyone has endevoured to vent the bonnet or purchase a vented bonnet with the aim of reducing engine bay temps and hopefully prolong component life. I'm not looking for huge rice vents, just options on something practical.

What are peopls thoughts on this idea, do you run the risk of allowing rain/debris/dust/dirt etc into the engine bay in larger than normal amounts, is there a real temp drop as a result, what have people done if they've pursued this idea (pics would be great too).

Thanks all

hey mate, i recently got a z tune vent moulded into my 32gtr bonnet i noticed around 15+ degree drop in engine temp.

peeeeee.jpg

and rain gets in. but i dont really notice it bieng dirty or anything. just made sure the seal around my cam covers and coils is in good form!

just adding to the thread after reading the rest of it.. i have been pulled over by police on a number of occasions and nothing ever mentioned about the bonnet, or headlight.. or anything for that matter.

Edited by Angus Smart
Link to comment
https://www.sau.com.au/forums/topic/151325-bonnet-venting/#findComment-2816925
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh bugger ! Your right ! Good old hydrogen sulfide. Takes me back to the good old school days ! 
    • I've owned a few scooters over the years, a Vespa PX oil burner was my first scooter, followed by a few others, including a little 50cc BeeWee that I used as a barracks bike, and I've had a blast on all of them, they really are the cheapest for of city/suburb transport around The only issue with scooters in Australia is lots of people look down on them due to their size,  maybe they need a big bike to make up for something else where they are lacking, unlike Europe and Asia where every man an their dog owns one, and now that filtering is legal in NSW, local traffic is never a issue Not to say I haven't owned my share of big cc bikes over the years, but they were for more blasting through the hills or Hwy riding where it needed to sit on Hwy speeds Safety wise, I ride like everyone is always trying to kill me, everyone is running a red, or running stop/give way signs, or generally asleep at the wheel, which most people are duringtheir commute, I also ride really safe, and give myself, and everyone else enough room in case I need to pull some hasty evasive actions, I've done a few rider training days over the years, which has come in handy on more than a few occasions  As for mods, there's nothing really, and yes your right about aftermarket exhaust, all you get is loud and obnoxious noises from them, like every 250-300 cc you hear with a aftermarket muffler, in saying this I did put a rear muffler from a 125 Aprilla on one of my old 125 scooters, it was horrendous and no amount of full face helmet and ear plugs would dampen that noise As for coming from the Harley, and what a overpriced POS that was, I no longer do big rides as my poor old busted joints ache after about 1/2 an hour of riding, long cruises are so much more enjoyable now in a car, so a big bike would be pointless   
    • Oh wow, it's easy to forget how cheap these can be. Probably the cheapest way to travel. Though people in cars here tend to be morons and I would not feel very safe. Were scooters ever big in Australia? It used to be the thing growing up in Europe ~20 years ago. 50/70/125ccm Peugeot or Yamaha and some others. Utterly obnoxious Polini race exhausts. Kick stands that slant as much as possible. So loud. So much noise for really not moving very fast at all. But it felt cool at the time. Not sure where I'm going with this, but there is an aftermarket for mopeds! Though I'd have pictured you more for a Goldwing kind of guy after growing out of the Harley.
    • You need to know I am sorry for this.  
    • As the MX5 isn't apparently "manly" enough, and I need something for runs to the local shops, and also take to my part time job at the salon, basically I can keep the MX5 away from car parks and stuff......like "flying lockers", I was wondering what I could buy to fix this issue LOL, I pick up a new Yamaha 125 Delight this arvo from Trooper Lu, basically a R1 that you can fit a slab of beer on between your feet, also, it was $29400 cheaper than a R1, so actually it's 2 x better than a R1    
×
×
  • Create New...