Blitz Sbc Icolor Boost Control

[Anthrax....R33]

can anyone help me out installing this boost control?? i cant find a decent english manual anywhere an ive had it like 6 months lol

[Howie]

Have a look at my thread for the Blitz DSBC, it should be similar if not the same for the SBC Icolor.

Basically, on the controller side theres the :

- Ground (run this to chassis)

- Power (tap this to an accessory like cig lighter)

- Boost/Vacuum (tap this to the inlet manifold)

On the solenoid end theres :

- In (run this to the hole closest to the turbo.. there's a pic in the thread i started re: the blitz dsbc)

- Out (run this to the actuator)

- then block off any unused pipes.

For tuning :

- set your limiter! Important! e.g. 10psi

- set your gain to something like 10.

- start increasing your duty/ratio. Go for a spin, check your peak boost. If not up to desired boost level, then increase the ratio slightly until you get the required boost level.

Good luck buddy.

[Howie]

Conversely download and follow this manual LOL

http://www.team3s.com/Blitz%20SBC%20i-D%20manual.pdf

[Anthrax....R33]

cheers for that mate.....im gonna go and have a play around with it now .....im getting impatient just thinkin about that extra boost...

[Howie]

No worries... go easy on the boost buddy