Jump to content
SAU Community

Recommended Posts

Hi, Does anyone know what the normal current draw is on an R33 GTS-t with the engine off and all accessories (alarms, interior lights etc...) off?

I am currently getting around 220mA and think this is the reason why my car has killed 2 Exide evolution 550cca batteries in 2 years.

I have tried pulling fuses with an ammeter attached and find that the current draw drops 220mA to 130mA when the main 63A fuse is pulled, the alarm is drawing about 30mA when not activated, all other fuses don’t seem to drop the current draw by that much??

I am currently getting the alternator checked out as It may not be charging to its full potential, although it is getting 14.1 when car is cold and 13.9 when car has warmed up.

Does anyone have any other ideas? As this problem is really annoying as I cannot leave my car for more than 3 or 4 days without starting it or the battery dies.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/151409-current-draw/
Share on other sites

Yeah ive got the same problem. leave the car for a week or so and the battery dies. ive gone through two batteries in as many months. my alternator is fine and i dont have an alarm or immobiliser or anything that would draw power while the car is off. just cant work it out. :P

Link to comment
https://www.sau.com.au/forums/topic/151409-current-draw/#findComment-2819712
Share on other sites

Found out now that the atenator is OK and with the doors locked current draw drops to about 150mA and then drops to 80mA with the Ignition fuse pulled.

My work commodore pulls about 10mA when everything is locked and off so 150mA still seems high??? Does anyone have any ideas?

Link to comment
https://www.sau.com.au/forums/topic/151409-current-draw/#findComment-2822109
Share on other sites

Yep, The reason the Alt will read 13.9V when first started as it has to try and recharge the battery - and as the charge level of the battery rises - so does the voltage.

Charge Rates are acceptable from 13.4V up to 14.5V in new cars.

Common faults are like boot lights and glove box lights. But I would be more enclined to look at the possibility that the stereo may be hooked up to a constant supply - (can you manually turn it on with the keys out of the ignition?) or the alarm system has a internal fault - which can happen also.

Cheers

Sumo

Link to comment
https://www.sau.com.au/forums/topic/151409-current-draw/#findComment-2826054
Share on other sites

Sounds like you need to keep pulling fuses until you work out exactly where the current 'leak' is, and then work out exactly what components take power from it.

Is the main fuse under the bonnet? Have you tried pulling every fuse under the dash to see if it is a smaller one down the line which is causing the fault?

Link to comment
https://www.sau.com.au/forums/topic/151409-current-draw/#findComment-2826983
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I figured out what’s wrong. It’s something to do with the high beam wire short circuiting. When I measure the continuity with a multimeter on the headlight socket connector it gives me a continuous beeping noise when I put it on the ground socket and also on the high beam socket.  On the passenger side of the car (working side), it’s only beeping when the probe is on the ground socket. Which makes sense.  So that means it has something to do with the high beam power supply for the drivers side. How do I trace that? Is it the turn signal lever malfunctioning? The one that also controls the high beam and low beams. 
    • Hey lads just finished tidying up a gtr a bought. Originally from Sydney now living in New Zealand 
    • Hi Guys, Looking for this piece if anyone can help out.   https://tfaspeed.com/products/nissan-skyline-r33-gtr-rear-trunk-finsher-panel
    • How did you go with your problem? End up fixing it. Have a y34 aswell vq30det
    • But if I smoke test 5th cylinder it’s all ok, no leaks  when I try with 2nd it’s leaking exhaust and intake, it doesn’t come from oil dip stick.    so maybe when car was running poorly, rich or sth. Spark plugs were black and covered in charcoal or sth lookalike. could potential contamination make valves not seal properly? is there also a possibility that rb’s don’t have equal performing cooling passages  meaning back of the engine will be hotter than front. Can this cause improper wear if engine was running under load for short time? Or carbon build up could just burnt from 4-6 and is still on 1-3?   I out of my head like really. Timing is as manual crank-exhaust 47, exhaust-intake 38 at this point I thinking about give it a try and make another 500-1000km and check if anything change, if not I will most likely disassemble engine head /or whole engine and send it back to rebuild. It’s killing me     
×
×
  • Create New...