Jump to content
SAU Community

Turn On Lights Loss Of Power?


jtrb25
 Share

Recommended Posts

hey, i have a nissan r33gtst and i have just recently put new light bulbs in as the old ones failed. but now when the lights are on im experiencing a rough idle and eventually my car will stall!!!

anyone else experience this or know why it is happening?? my appreciation for help in advance. :P

cheers james

Link to comment
Share on other sites

Sounds like a short in the electrical system in your car.. that could have caused the globes to burn out in the first place... have you installed any electronic devices recently? or check all the wiring for any aftermarket devices such as turbo timer, CD player, Amp .etc.

Get an auto electrician to check it out

Cheers

Edited by QRI05E
Link to comment
Share on other sites

Check all the engine earths and also the earth on the headlights, make sure there is no corrosion build up around these areas.

Did both headlights blow at the same time? or did only one go and then you decided to replace both?

Alternator could also be on its last legs, you need to see what the current jump is on the battery with a multimeter when you start the car to know if its dieing. You can check the alternator directly too but you still need to grab a multimeter. Check the earths first, also put the inerior light on and the A/C and see if it will die by using other items.

Edited by James_03
Link to comment
Share on other sites

i find i have the same problem at night time, when im driving car feels like i take my foot off the gas then comes back in also have the bad idle at night while lights are on.. im gonna buy a volt stabalizer thingo n see how that goes, even if it doesnt help alot it wouldnt hurt to have one i guess

when i install this im also puttin new battery in

Edited by 2gceffy
Link to comment
Share on other sites

It sounds like your alternator. Best way to check it is to start your car and then disconnect one of the terminals from your battery. If the car turns off its your alternator but if it doesn't then its something else.

Link to comment
Share on other sites

disconnecting the battery while engine is running is a risk to damage the alternator`s governor.

to check alternator just measure voltage @battery terminals, normal value is 12.3-12.8v with engine off and ~ 13.2-14.5v with engine on and healthy alternator.

Link to comment
Share on other sites

hey thanks for the advice, my car has got a turbo timer fitted. and it looks like they have just spliced the wires and joined them. i will go check for suffecient voltage tonight or tommorrow and let you guys no what the problem is

Link to comment
Share on other sites

hey i have checked my voltage and it all seems to be fine about 14.4-14.3 with car started and everything going flat out, lights and aircond. while i was looking over everythig i noticed that there was a steel rope kinda thing only small tht looks like it was connected to my catalytic, but no longer is. i reconnected it and ill see how that goes. anyone know what that is???

ps.. im not that crash hot with car electrics... :(

Link to comment
Share on other sites

temperature sensor for the cat. if the cat gets too hot a dash light shows up to let you know.

shouldn't normally happen unless there's something wrong or you're driving it like it's stolen, but might as well have it plugged in since it's there!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • OK, next order of business, very much not important but I didn't like how like how it looked (and, we can pretend it restricts airflow if that makes this better). Both the front number plate, and more importantly the holder are pretty ugly. Step1, replace bent old plate with new one in blue cf style with new values Step2, unlike the Leaf where the bumper was flat enough to remove the holder altogether and just mount it on the bumper, with the v37 I decided to chop the hell out of the mount to retain the flat mounting surface. Step 3, much better (needs black bolts I think)
    • If you are selling an R32 GTR, you can buy 3 or 4 v37s Redsports..... Anyway, a few more services/mods for daily use are the first order of business. I'm using the 2015 Q50 (LHD) workshop manuals from Nicoclub and they seem pretty much right, but a search didn't turn up any mention of the term "glove" so I could work out how to properly change the cabin filter for the AC. After some stuffing around, turns out Nissan now call it a "grove" box. Anyway, for anyone who does want to change their cabin filter : 1. Half open the glove box then push upwards each side to release bottom hinges, then twist sideways to remove opening stoppers, then pop off dampener string LHS 2. Unclip the cover behind, then unclip the cover behind that 3. Cabin filter is now readily accessible, note the airflow arrow points downwards. It seems loose in the space but note the cover has tabs that will push it up when you install the cover This time the filter was basically new so I've just marked it with the current date and reinstalled, and the aftermarket replacement I bought Wesfil (WACF-0177) is into the parts box   I really recommend checking this in any car that is new to you, they are normally really grotty
    • I got tools but nothing special, your typical <100 piece toolset ahaha Though, I've never touched CV's before, and dont want to f*ck it up either... I've never taken my car to a shop before (I usually do everything myself or ask the ole man for help) so appreciate the advice on that, will probably stay away even more now. Regardless, any recommendations?  Planning on going to the suspension shop in Rydalmere sometime soon after fitting the coilovers & cv's too for a good alignment.
    • Although, if you're in south-western sydney, i highly recommend you stay away from any shop on Hoxton Park Road.
    • CV's aren't' hard to rebuild, if you don't have the tools then yeah, throw it towards your nearest garage. Any half decent "mechanic" can rebuild a CV, it's quite common to do since there are millions of FWD cars about.
×
×
  • Create New...