Jump to content
SAU Community

Gtr/gtst Parts, Rims And Race Seat Updated!


Recommended Posts

Hi Guys

I have a number of parts I had bought for my now sold R32 GTR tarmac rally car that I was hanging onto to put on an R32 GTSt track car. Seeing as I've just bought a Series 6 RX7 instead of a R32 GTSt for the track the R32 parts are no longer needed! (Still planning changing the BMW for a R33 GTS25t though!)

Unless noted, all parts are as new and were never fitted.

Sparco Pro 2000 FIA approved seat (Used at Targa, but newly retrimed sides in Sparco fabric) - SOLD

post-5400-1170706905.jpg

R32 Intercooler Duct Set (Ready to paint)- $120

post-5400-1168588643.jpg

R32 Alloy Drivers Side Race Seat Mount Set (Used, suit fixed back Sparco, MOMO, Bride ect) - SOLD

post-5400-1168588672.jpg

Rays Engineering Volk Racing Challenge Series (17x9) Sorry about the pic - $1500

post-5400-1170706655.jpg

R32 Alloy Radiator (40mm Triple Core) - SOLD

R32 Silicone Radiator Hose Set - SOLD

post-5400-1168588581.jpg

post-5400-1168588615.jpg

Edited by t01-100

Benno i want the seat mounts and also maybe the cooler ducts.

I'll be in touch about the rails on Monday so DONT SELL EM :laugh:

GMB

OH and i CANT believe you bought a stinking rotor :laugh:

dam dam dam im after a set of seat rails just like these at the moment. well im definatly next in line after GMB. if GMB takes them coulk you please point me in the right direction for some new ones?

Stu could you give me some measurements for the radiator, mainly:

-height (core and total), width

-distance between mounting pegs on the bottom.

I'm interested to see if it would go close to fitting in my HR31.

While I'm at it here are some rims too!

R33 Nissan GTR 17x9+35, peppered with stone chips, only one tyre is any good of those fitted

These rims were on my GTR for the SPEED Magazine photo shoot - $1100

post-5400-1168669278.jpg post-5400-1168669301.jpg post-5400-1168669409.jpg

Rays Engineering Volk Racing Challenge Series 17x9+25

No tyres - $1500

post-5400-1168669316.jpg

Stu could you give me some measurements for the radiator, mainly:

-height (core and total), width

-distance between mounting pegs on the bottom.

I'm interested to see if it would go close to fitting in my HR31.

Will check and some back to you Floody

While I'm at it here are some rims too!

R33 Nissan GTR 17x9+35, peppered with stone chips, only one tyre is any good of those fitted

These rims were on my GTR for the SPEED Magazine photo shoot - $1100

post-5400-1168669278.jpg post-5400-1168669301.jpg post-5400-1168669409.jpg

Rays Engineering Volk Racing Challenge Series 17x9+25

No tyres - $1500

post-5400-1168669316.jpg

If I didn't just fork out for a new gearbox Stu, the gtr rims would be mine. :)

Edited by woolls

Floody - Total width is 665 end to end, core is 635 end to end. Height is 430 from the base of the filler neck (highest point) to the bottom tank, 355 core top to bottom. Space between bottom pegs is 375

Sav_man - Clearances are 400 at the hub, 415 at the centre, 430 at the outter edge, so biggest your likley to see in a 17. I've seen them clear AP 6 piston caliper with 355 rotor.

Woolls - I sympathise!

Edited by t01-100

I'm a bit disappointed no one has commented on the beautifully painted concrete floor... two and half car spots in the car port and took three coats! The stuff was so strong I couldn't smell anything for hours!

Cool, i'll measure my brakes when i get them back (if i ever do). I need some wheels for the track, and 17" rubber is cheaper :) , but rays are a bit ladida for track days i spose :)

Cool, i'll measure my brakes when i get them back (if i ever do). I need some wheels for the track, and 17" rubber is cheaper :D , but rays are a bit ladida for track days i spose :P

They'd look hot with on gun metal, particually how they sit out and fill the guards with greater offset and width.

I would keep them for the RX, but they won't clear the standard front archs and wider ones aren't allowed for tarmac events.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
    • Was that Australia Delivered Duncan? Does it have siren etc?   I used to have remote start on an old 32 two decades ago, it was a cool feature. I used to wake up early in winter for work. Start it and by the time i was out the door a few minutes later the engine was warmed up and the heaters had the car toasty. It was great.    I don’t mine the ambience lighting.  I drive a western star and it has footwell lights and ambient lighting and it’s great! From the pics of seen of them installed in a skyline I think it’s a nice touch 
    • re the security system, my Fuga/Q70 has the factory option where the puddle lights in the mirrors turn on when the prox key is detected, it was clearly dealer fitted and has a switch in the lower dash to disable it....it didn't have remote start but TBH I don't really miss that, I had it in the Stagea originally but never used it....we don't often have to warm the car up in the snow before we get in for Australia. And the Fuga also has the illuminated footwells, sounds like a useless feature but I actually quite like the indirect light within the car, it was a nice addition
    • Ok now I’m extremely jealous 
×
×
  • Create New...