Jump to content
SAU Community

Recommended Posts

Greetings guys,

Im looking at upgrading to an R33 GTR from my current ride (R32 GTST).

Whats the difference between a Vspec(I & II) and a normal one?

How would one physically tell a Vspec apart from a normal one? (Apart from the sticker on the boot lid)

I noe the R32s were easier to differentiate, since the V specs had brembos which the rest of the R32s didnt have....

Many thanks

Mark

:))

Oh P.S: What kind of LSDs do the 33GTRs/Vspecs currently run? I was wondering if they were equipped with the same Helical LSDs as found on the r34GTR/S15/R34GTT, or the viscous as found on the 33GTSTs etc...

Link to comment
https://www.sau.com.au/forums/topic/15157-how-do-u-tell-a-v-spec/
Share on other sites

Thanks for the advice guys!

Nuthing wrong with the the R32 V specs, its just that i was told those were easier to differentiate from the normal r32 gtrs because they had brembos while the rest didnt.

The 33s all have brembos.

So basically i need to look out for:

1. V spec sticker of course :P

2. Rear Diff with cooling fins

Anything esle that might help?

Many thanks guys!

There is only one 'series' of the R33 gtr v spec, although there were the usual R33 revisions. Fins on the rear diff are the most noticable difference for the active LSD. (As opposed to smooth)

Main difference: V spec has a rear Active LSD. There are a couple of others IIRC, like suspension.

OK my dad had the same trouble while looking for one, though we did find out the easiest way to tell witch is simply bend over and look up the ass of the car and if the diff has cooling fins on it and looks somthing like a 50cc engine off a bike... thats a v-spec diff :P no garentees somone has put one on there tho :(

look at the front brakes because there diferant to a normal GT-R too

Oh and whats wrong with the R32 GT-R?

to put it simpley, there is a longer reaction time befor the 4x4 kicks in plus its not the smoothest of motion compared to the R33... this makes it a pig to drive hard if you dont know what your doing.

although its around a second quicker 0-100 :P R33 just makes a much more driver orientated ride.

I've been doing some homework on the internet regarding the V spec, and some quoted the v spec to have harder and lower (10mm) suspension.

Can anyone with a vspec verify this? (rofocale perhaps?)

I've test driven a non vspec before, but have yet to score a ride in a vspec.

P.S: whats the diff between a vspec and a v spec II then?

Many thanks for the input guys

really appreciate it!

Can't verify the suspension thing, but I think you're right. There were no series II for R33 GTR V specs. Only on R32 and R34s have that. R33 revisions are the usual things like passenger airbags etc. I have seen adds for series II R33 GTR's. They're wrong. Hahahaha. Vendors looking for an excuse to get more money.

If anyone has High Performance Imports mag no. 16, there is a 2 page article on the R33 V-SPEC differences.

I have scanned these pages (hopefully HPI won't mind), so if anyone is interested post or PM your email and I'll send them through. (191Kb & 220Kb).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Read the ECU for fault codes or have someone else do it. A faulty coolant temperature sender is usually listed in ECUs. If the sensor itself is not busted it can also be a bad ground connection. Or in a really unlucky case, damaged wiring.
    • Can't be a Futjitsubo as those are made with a flex piece and Reimax is smaller in pipe diameter. If anything it is closest to a Mines pipe, but evidently it is not an actual Mines pipe.   Classic word humor
    • Alright I will try to not forget.   As GTSboy replied to you already, problem is mainly the mismatch between the actual exhaust part and the denomination in the papers. That basically just looks like tampering to a cop, if they were to check your car and notice. If it had been done right they would have clarified it to be a custom pipe and just given it a certain part number that you have to engrave or weld onto the pipe. I will definitely inquire on what to do. Changing the pipe wouldn't be my favorite solution as it costs a bunch of money and the cat was fitted with the front pipe and exhaust under the car, and if the front pipe flange does not sit in the OEM location the cat will need to be refit for any other pipe to work. It also usually doesn't need a brand name or something like that, but more something like a part number. Usually for exhaust parts, on silencers and cat units specifically, there is a badge that reads the certificate number that belongs to these exhaust parts under EU regulation. You get these numbers after you put a part or group of parts through the tedious testing according to EU vehicle legislation and they pass. You can find these "part numbers" on various parts throughout a EU vehicle. On windows, headlights, engine parts, seat belts and so on. All these parts have gone through standardized testing and acquired a so called ECE or EG Certificate that makes them legal to use by themselves in all countries that adhere to these standards. You can also not alter these parts in any way, if you do they become illegal. An example for stampings on an exterior lighting part, the people who need to know can find the documentation for this unit in a database. I do not know what all the standards and so on mean.
    • If that was the case I suppose you could call it "Mein's" brand....  ... I'll see myself out... 😅
×
×
  • Create New...