Jump to content
SAU Community

My Introduction

Draen

By Draen,
in Queensland

 Share

Recommended Posts

Draen Enthusiast

Draen

Posted
Posted

Hey All,

I have been reading these forums for a while and getting some helpful information out of it. I thought it's time to introduce myself, as I'm keen to meet up with other Brisbane Enthusiasts. Andy is the name.

I have had my R32Gts-t for just under a year (Pretty much of the boat) and am in the process of tidying bits and pieces, as it seems like it previously hasn't been used for a while. It has got the standard bolt ons, boost controller, aftermarket nismo shock/spring combo and Adjust castor rods. Not looking to spend huge $$ on this thing as Id prob uprade to another base in a couple of years time. The next mods to finish it off is prob installing a front dump pipe, and then retuning the stock ecu to make it drive nicely.

Not looking at huge HP at this stage, rather aim for a nice smooth/responsive drive that handles well, but more importantly learn how to use the thing! Down the track I would love to try it out on the track and also see what some of you more experienced drivers can do.

Have been doing a few mountain runs and getting used to using the gears. Just the other week I took it for a drive around the Sunshine Coast hinterland (see pict below) to stretch its legs, after not using it for

a month. Loving it more and more, the more i drive it.

Main reason I wanted to get Jap import is to get my hands dirty and do a lot of the maintenance work myself. It's better stuffing up on a jap car, where parts are abundant and reasonably cheap, before I get into the Euros.

I have done a lot of the very basic things - oil changes, filter changes, pod, removal of radiator (as my top tank decided to sh@t itself). What I'm keen to learn how to do, is to Flush/bleed the coolant and brakes, as well as installing suspension, for starters. If anyone is doing any of these soon, on their car, and don't mind company, I wouldn't mind taking a look at how it's done. Send us a Pm.

On a different note, as time permits I will eventually rock up to one of those dinners that are organised. Otherwise if you consider yourself an ok tennis player, and live around the South-west side of Bris, wouldn't mind having a hit with ya on a weeknight. Send us a PM - might be able to get a small group together if there is enough interest, and hire a couple of courts. Can play at UQ-St Lucia unless anyone can suggest another venue.

Anyway, hope to meet some of ya's around.

Andy

post-34402-1168697501.jpg

Link to comment
https://www.sau.com.au/forums/topic/151593-my-introduction/
Share on other sites
Col-GTSX Grand Master

Col-GTSX

Posted
Posted

Hey Andy

Welcome to the SAU forums...

Most of us locals like to hang out in the QLD section, but please feel free to explore the forums as a whole...

Keep and eye on the events section at the top of the qld section to see whats going on in QLD. Come along to a Tuesday night dinner sometime and you will be able to meet many of the users and members of the club...

By all means come allong to the dyno day and have a snag, chuck the car on the rollers if you want to see where you are starting, before you go mod crazy...

Anyways Welcome aboard...

PM if you need anything...

Link to comment
https://www.sau.com.au/forums/topic/151593-my-introduction/#findComment-2821126
Share on other sites
Benno31 Experienced

Benno31

Posted
Posted

Welcome Andy,

Nice ride. I hope to see you at a Tuesday dinner soon.

Sounds like you could use a Dyno run to get an idea of your current power before you start modding. It will give you a reference point to work from.

Cheers,

Ben.

Link to comment
https://www.sau.com.au/forums/topic/151593-my-introduction/#findComment-2823020
Share on other sites
ze_flexy_1 Community Regular

ze_flexy_1

Posted
Posted

Welcome, me and IanB are thinking hinterlands for next mountian run, will post in events section so yeah keep peeling your eyes because its going to be sorted out....sooner or later

Link to comment
https://www.sau.com.au/forums/topic/151593-my-introduction/#findComment-2847759
Share on other sites
IanB Veteran

IanB

Posted
Posted

I dont know about the hinterlands hun, we just did that :laugh:

Im actually thinking of heading west for the next one. Theres some great un-explored roads out that way.

I will be firing up a post for febuary's mountain run sometime this week for more info, and im working sane hours again starting next week so I will be coming along to tuesday night dinners again.

Link to comment
https://www.sau.com.au/forums/topic/151593-my-introduction/#findComment-2847962
Share on other sites
Draen Enthusiast

Draen

Posted
  • Author
Posted (edited)

Just did the run to Mt Nebo (Up to the cafe there) today. Cant go past that run for a good mixture of curves and straights.

Im keen for somewhere west - havent been west lately. I remember there were some nice roads Going Crows Nest (Blue Mountain Heights) back to bris.

Edited by Draen
Link to comment
https://www.sau.com.au/forums/topic/151593-my-introduction/#findComment-2857946
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card stile AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had not flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      So to summarise, the best thing to do is to move recirc to between turbo and IC, and maf on the crossover pipe. Meaning I'd need a recirc flange, drill a hole in the piping on turbo outlet area. And drill hole on crossover to fit/weld maf sensor? Either that or put the MAF on the turbo inlet right?  Is an aftermarket recirc/blowoff valve recommended? Do currently have family in Japan so could probably bring something back with maybe a cheeky lil SuperAutobacs run?
    • tsuokun
      Lets play a game - What is causing my oil consumption?

      By tsuokun · Posted

      Yep, so far most have said that it looks like corrosion on the wall from piston not moving. Which then has probably damaged the oil rings and caused those vertical marks. The longest the engine was still after the rebuild, was the winter of 2018 - 2019, plus the boat trip to Japan. When I shipped the car, it had normal gas in the tank but before that winter pause, it had E85 in tank.  In any case, even if either one of those was the cause, it happened close to 6 years ago and the car has been driven something like 30 000kms after the fact. Again, apart from the plugs and the dip stick, there is nothing in the way the car runs that would indicate what has been going on in the engine. I am going to consult a shop and ask their opinion, what would be the best approach. I do have some access to a garage I could use to diagnose further myself, but time is very restrictive. Might end up buying another engine that could be used while this one is being remedied. Without pulling the head, it will be impossible to find out if it needs another bore, but here's to hoping a hone would suffice.  Goddamnit, I would really have preferred this not happening.  
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Boot is going to be replaced eventually. I just wire brushed what I could and rust converted. Then painted in rust kill primer. the spoiler also got repainted and plugs replaced on the ends. The under side of the bonnet is going to be black also, currently white. But red on the top side, same colour code as the silo to begin.
×
×
  • Create New...