Jump to content
SAU Community

Recommended Posts

As it says i want 2 put a set of 20's on my r33 gtst as im gona make it a show car, its already got go so time 4 sum show. I dont want people to write crap, just get straight 2 the point and tell me wot ill need 2 do 2 fit them on my car. They'll most prob b 20x8.5. The car will be having wider front and rear guards put on. all i no is that ill have 2 get the guards pumped and rolled but thats bout all i no, wot will i need 2 do with springs etc.

Link to comment
https://www.sau.com.au/forums/topic/151801-i-want-20s-on-my-33/
Share on other sites

Get coilovers, if you use lowered springs the spring rate will be to soft and will forever be hitting the bump stops.

not exactly, you can get lowered springs at any spring rate you want. If its going to be a show car then the ride shouldnt be an issue but with coilovers being as cheap as they are its prob easier to just get a set and have easy height adjustability.

not exactly, you can get lowered springs at any spring rate you want. If its going to be a show car then the ride shouldnt be an issue but with coilovers being as cheap as they are its prob easier to just get a set and have easy height adjustability.

If you use a higher spring rate you'll need new shockies 5000km's later and by the time you buy shocks the cost will be around $1000 mark and a few hundred more gives coilovers with height and damping adjustabilty. So it's just a bit impractical.

i got 19/10 lowenharts on the back and also have wider front and rear guards. I had to cut about an inch off the original guard lip. I have stiff KYB shocks and it still manages to rub at times.

image006ia0.jpg

image009hy9.jpg

My opinion stick with 19" with some stiff coilover suspension. with around a 20+ offset.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • https://www.youtube.com/watch?v=KyZDvZmvhik
    • You'd be better off digging a pit and standing under it to shoot it.
    • The easiest way would to be ignore the oscilloscope, grab a multimeter, and make sure all the main connections are right. An oscilloscope will give 99.9% of even technicians so much grief, as they have no idea what things should even look like on an oscilloscope. Which is also even more likely for someone who's first ever major work on a car is this If the battery volts are dropping down so low, the LDV will reboot the ECU, when it does so, it will drop out the start circuit. If this is occuring, the battery voltage should also come back up. Give it a few tests, even simple ones like when you're attempting to crank it, measure voltage from the engine block, to the negative terminal. You might find you've got really bad connections somewhere. My guess is the "new" motor has something like a shit starter motor, at which point, you can swap the starter motor from the old motor, to the new motor. Before I did any of the above though, I'd 100% confirm the battery in the vehicle. Most jumper packs are absolutely useless, especially if a battery has a bad cell for example. Also the new modern "jump packs" if you don't know what you're doing with them, you won't even get them into high current stage. So go back to basics, check the battery, especially with a known good one as a replacement test. Check ALL the wiring, this includes where they're bolted onto the battery, and bolted onto the starter motor. Check all the earth straps are on. Measure your resistances across your earth straps. A good check here is to measure voltage across the earth straps while you're trying to crank it. If you're seeing voltage, you've got high resistance joints! Oh, and once you've done the above, check the battery over again.
    • For most rotisseries, as Duncan has mentioned, you really don't want a full car on it, you want a stripped shell. And imagine how many more weeks THAT is going to add to working on the car...
×
×
  • Create New...