Jump to content
SAU Community

Recommended Posts

I'm about to do a set of front end and rear bushes in my 32.

AVS has shut there doors. Has any one got any recommendations for some others that don't opt for the attitude 'close enough is good enough'?

I've previously delt with Bridgestone Tyre Center at Noarlunga and they were top notch, BUT... its a little out my way to drive such a distance without having any sort of alignment at all.

Link to comment
https://www.sau.com.au/forums/topic/151892-new-bushes-need-a-wheel-align/
Share on other sites

There should be a bridgestone tyre center closer to your location, they all do great job

Yep I have been eyeing off the Bridgestone behind centerlink at Marion.

They keep semi's in stock so no doubt they are in to the performance side of things a little more than some others.

Actually Steve works at Manta Racing in Richmond. I somehow got redirected there from ringing Stable, but yeah, went to see him at Manta. Official Bilstein dealer in SA, has a race car, so I'd say he does good work. Workshop is also spotless, something good to look for.

I'll also say give Jarrod a try at North Terrace Tyres. Very helpful guy and sets up a lot of race cars, so I doubt he'd do the "close enough is good enough thing"

Short of that, ring any motorsport tyre dealer. They SHOULD know their stuff and do good work.

This includes;

North Terrace tyres

Jack Baker Tyrepower (not sure if they're still a motorsport dealer though)

Bridgestone Macgill

City Discount Tyre Keswick

Adelaide Radial Tyre

Tyrepower Blackwood

Think there are others (motorsport dealers), but I cant think of them at the moment. :)

Edited by salad

I'd personally recommend who I took my car to.

Wise Choice Tyres down at Londsdale. I've only got the stock suspension, but the guy that did my car spent an hour going over it making sure it was all ok, he took me with him for a short drive twice & talked about how he thought it was before making final adjustments. It didn't leave until he was satified, he adjusting camber settings & all. Was very impressed & it cost me only $50. They take great pride in their work. It had been to Bob Jane the same day after having already been there once only a few weeks earlier before the wheel alignment went right out. THEY ARE CRAP

Wise Choice also have some of the best tyre prices around too (I've never been quoted a lower price anywhere else on ANY tyre they offer) & the guys there are very enthusiastic, they loved my car. Tell them you know the guy with the nice red skyline that was there only last week & they'll probably know who you're on about :yes:

My 10c worth

Edited by JazzaR33
Wise Choice

lol, used to work ummmm 'closely' >_< with Wice Choice's bosses daughter at Ferraris Formalwear (she still works for them, at the Tonsley store) - absolute stunner of a blonde, great bod, bit blonde on the brain tho hehehe.

ahh I digress, sweet memories. anyways, the Light Wheel Alignment place was the one the ex-AVS worker told me to go to. So that says something.

lol, used to work ummmm 'closely' >_< with Wice Choice's bosses daughter at Ferraris Formalwear (she still works for them, at the Tonsley store) - absolute stunner of a blonde, great bod, bit blonde on the brain tho hehehe.

ahh I digress, sweet memories. anyways, the Light Wheel Alignment place was the one the ex-AVS worker told me to go to. So that says something.

Hmmmm wonders what i could use a suit hire for??? :happy:

Yeh i went to Light Wheel Alignment a few years back with the Statesman, when nobody could straighten up the lovely IRS cambered out back wheels when i slammed it, They did good work!

Hmmmm wonders what i could use a suit hire for??? >_<

Yeh i went to Light Wheel Alignment a few years back with the Statesman, when nobody could straighten up the lovely IRS cambered out back wheels when i slammed it, They did good work!

I had a VS 5ltr 5speed thing that had IRS. It sat on superlow Bilstein suspension.

That had massive rear camber where new tyres only lasted 5000km's. :happy:

Bridgestone at Noarlunga sorted out the camber and had it running from memory -0.5 on both sides and it hooked up so so much better. I was then able to launch it with around 2500rpm vs just off idle without the camber kit.

My left wheel was worse than the right *on ya Holden* so they had to throw spacers under the spring to level up the left and right height.

But turned out really good. Cost me $500 for the camber kit. I believe the camber kit was from Whiteline also.

Pedders and others at the time claimed they had a camber kit but it was nothing more than a toe kit with limited adjustment.

lol... then it ripped the swaybar risers out of the struts, then the rear IRS subframe split completely from one of the diff bolt up holes, then the diff went, then the gearbox. It was fine with stockish power levels. Anything more and the drive line couldn't hold it. :S

I had a VS 5ltr 5speed thing that had IRS. It sat on superlow Bilstein suspension.

That had massive rear camber where new tyres only lasted 5000km's. :P

Bridgestone at Noarlunga sorted out the camber and had it running from memory -0.5 on both sides and it hooked up so so much better. I was then able to launch it with around 2500rpm vs just off idle without the camber kit.

My left wheel was worse than the right *on ya Holden* so they had to throw spacers under the spring to level up the left and right height.

But turned out really good. Cost me $500 for the camber kit. I believe the camber kit was from Whiteline also.

Pedders and others at the time claimed they had a camber kit but it was nothing more than a toe kit with limited adjustment.

lol... then it ripped the swaybar risers out of the struts, then the rear IRS subframe split completely from one of the diff bolt up holes, then the diff went, then the gearbox. It was fine with stockish power levels. Anything more and the drive line couldn't hold it. :S

My god that sounds just like my VQ Statesman, My IRS subframe cracked also, so when i was reversing the crack would open up and my camber went to like 10 deg neg! >_< and my diff went, so i got 3.8 ratios put in instead of the stock 3.08! and BANG the G/Box went also! But i think the only difference between us Cubes............. was that i had K-mac adjustables not Whiteline! :happy:

My last job i was given the task of welding brackets to the IRS x-members that we received from holdens, then return em.

Constantly -im talking 1 out of 12 in a rack- was completely farked . Due to them being made and welded by a robot there was no quality on the welds. They didnt care either, just weld em send em out...I complained about it...*just keep welding*..

Someone mentioned they only offers 12 months warranty of the diff? Shows great confidence in their product..

Edited by Bl4cK32

Which bushes are you talking about cubes? cradle or suspension control arms?

My rear cradle bushes went a while back{leaking silicon on drive way} and had solid aluminium cones put in and they really steadied up the rear. They were custom made $600 pair and save you having to drop the rear cradle completely {just push through the old ones} so save labour cost's and are perfect for drifting set ups etc.

My front radius rods and top suspension control arms bushes needed replacing and I had them replaced recently with offset camber ones by steve at manta .All up radius rod kit $249 and adjustable off set camber kit $517 including fitting . Of course wheel alignment $40 and the car perfoms better than new .

The car was starting to drift all over the place before it was done .

He also drilled and fitted grease points aswell included in above price. Money well spent I think.

The aluminium cones however took 6 weeks to get hold of due to supply and demand .

All plus gst though. >_<

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, the other thing I've sorted is a baseline dyno run up at Unigroup's new location. The auto trans was a little unco-operative by both shifting down when the throttle was floored on the dyno (so Mark had to ramp it up more slowly than in a manual) and also by shifting up at 6,000 even in sports mode instead of the indicated redline of 7,000 Still, on a hot day it made 240rwkw at 16psi which seems about right for 300kw (400hp) through an auto at the wheels.  The shape of the curve is not quite right because it was not full throttle to about 4,500 to stop it kicking down, but until I can get a tune on the auto trans control this was the best we could do.....full boost will be well below 5,000 once that is sorted, I'll get some data logs when I can to confirm For comparison, the R32 made 255 at 12psi (at 4,500) on the same dyno with tune, n1 turbos, cam gears, big exhaust but otherwise all standard so the v37 is likely a little better out of the box. One thing that is very clear is that the standard water to air intercoolers are not up to sustained use at full throttle in warm ambient temps. After about 5 runs (so only a few minutes full throttle), it was pulling boost and timing and dropping 10-15% power. Unfortunately I didn't get that printout and the Unigroup guys are away at the moment, will try and get hold of it on their return. So, looks like a healthy engine to start modifying and the only real area of concern is the w2a heat exchangers which the aftermarket has plenty of solutions for    
    • I maintain it actually looked really nice in person. So much so that I thought "No, this is illegal" but there it was, clear as day. I think we can easily call the wing and wheels/height to be transformative. Not saying it's better than the GR Whatever, or the 86, or the WRX STI or anything of that sort (the internet says it all bolts up so you can buy best of all worlds?) but it's still at least a thing and not nearly AS bad as people say.
    • That's less offensive than the previous gen.....except for all that ugly black tupperware around the edges. Blerck!
    • I leant out the window recently and took a picture of this new WRX. It looked real damn fine in person. It's faster around a track (stock) than a (stock) GR Yaris. It's much more practical despite being heavier. It's significantly cheaper. This gen tunes really well, much better than others. .... I think they're probably a lot better than people expect.
    • WRXs are a pure pleb boring car these days. You need to get an STI to even get close to what a WRX used to be.
×
×
  • Create New...