Jump to content
SAU Community

Recommended Posts

Hey guys I just my volk fzero rims on the weekend and turns out that the inside doesn't look so good with the car, so I'm gonna change the red to blue. Can someone give some hints or tips on the process? or should I take it somewhere to get it sprayed or something. I notice it's a bit difficult cos I cant paint over the words 'VOLK RACING'

100139.jpg

I've also did a search and some steps were

1. sand back the rim with wet and dry (you will tell the difference when its sanded)

2. dry them with a cloth and a heat gun or hair dryier to fasten the drying process

3. wipe the rim with wax and grease remover, to remove any grease left on the rim

4. mask up the tyre with masking tape/newspaper so you dont get any overspray on the tyre's

5. spray 1 coat of grey primer (makes the paint stick/last)

6. after drying with heatgun or hairdryer, sand back the rim very lightly

7. spray 1 coat of colour as desired (mist coat)

8. dry with heatgun or hairdryer

9. apply 2nd and final coat of paint (second coat should be heavier than first coat)

10. after fully dry, spray 1 coat of clear

and this is from SYLNE.

any hints and tips would be grateful thanks!

Hey mate,

I really wouldnt attempt this on your own. your better of getting them professionaly done. You wont be able to achieve a great result from spray cans .

Edited by Silent
  Leon.T said:
Hey guys I just my volk fzero rims on the weekend and turns out that the inside doesn't look so good with the car, so I'm gonna change the red to blue. Can someone give some hints or tips on the process? or should I take it somewhere to get it sprayed or something. I notice it's a bit difficult cos I cant paint over the words 'VOLK RACING'

100139.jpg

I've also did a search and some steps were

1. sand back the rim with wet and dry (you will tell the difference when its sanded)

2. dry them with a cloth and a heat gun or hair dryier to fasten the drying process

3. wipe the rim with wax and grease remover, to remove any grease left on the rim

4. mask up the tyre with masking tape/newspaper so you dont get any overspray on the tyre's

5. spray 1 coat of grey primer (makes the paint stick/last)

6. after drying with heatgun or hairdryer, sand back the rim very lightly

7. spray 1 coat of colour as desired (mist coat)

8. dry with heatgun or hairdryer

9. apply 2nd and final coat of paint (second coat should be heavier than first coat)

10. after fully dry, spray 1 coat of clear

and this is from SYLNE.

any hints and tips would be grateful thanks!

Depending on what colour your paint is, grey undercoat isnt always recommended.

i believe there are 3 primer colours grey/white/black

In your case i would use a grey or white undercoat depending on how light/dark the blue is, remember.. if you use a grey primer and your finished colour is a light blue might take afew more coats then usual to cover

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
×
×
  • Create New...