Jump to content
SAU Community

Whats Going On ? Melbourne Out Of Power?


Recommended Posts

I was stuck in my office for 20 minutes because all our doors are electrically operated and i forgot about emergency exits. Took me about 10 minutes to work up the balls to cross from some offroad near the corner hotel, across 8 lanes and onto hoddle, scary shit..

power was out in endeavour hills but not in dande north. bro was at home alone and doesnt have a clue bout anything. so when power goes off he calls dad. now when you put my dad and bro together 2+2 usually makes 3.

bro ends up playing around with the mains switches at home under instruction from dad over the phone. didnt work so he was told to put it bak to what it was

anyway i got home, and power was still out, so no air con. after 30 mins i call mum in dande, she says she called a friend of hers and confirms power is still out in the 'hills. now about 6.30 and im literally dripping.

finally got fed up and went to check the mains switches. what do i see but all the switches turned off and even some of the fuses just lying around!! simple replacement and sweet air con was mine to enjoy.

the idiocy of my family amazes me

/rant

power was out in endeavour hills but not in dande north. bro was at home alone and doesnt have a clue bout anything. so when power goes off he calls dad. now when you put my dad and bro together 2+2 usually makes 3.

bro ends up playing around with the mains switches at home under instruction from dad over the phone. didnt work so he was told to put it bak to what it was

anyway i got home, and power was still out, so no air con. after 30 mins i call mum in dande, she says she called a friend of hers and confirms power is still out in the 'hills. now about 6.30 and im literally dripping.

finally got fed up and went to check the mains switches. what do i see but all the switches turned off and even some of the fuses just lying around!! simple replacement and sweet air con was mine to enjoy.

the idiocy of my family amazes me

/rant

dunno what u were doing but we dont have ripple control in Vic so there is no remote switching of controled load such as hot water and air con, if the fuses were out, some1 took them ok.

In the not to distant future the use of controled loads such as Air Con wil come at a price on these days. Both the elec distribution and retail companies buy electricty at varying prices every 30min according to demand..I had a quick look at the demand price per MWh yesterday and it went though the roof. However the real issue was that one of the interstate suppies used for meet peak demand requirements was taken off line due to the bushfires...

So what can u expect in the future?

Currently u will be on a fixed tariff setup either flat rate or peak off/peak for fixed times during the day. The new systems to be deployed by 2008 will allow more felxability and in reality help these companies make you, the customer, pay for these peak demand times by varying tarriff rates for controlled load especially...in fact you the customer will probably have visability of this and depending on what u signed up for, might even have ur load shed automatically in these situtaions.

In additiont he distribution companies in your area i.e. AGL, SPAusnet, Cipower/POwercore will have the ability to shed you power and esp. controlled loads such as air con remotely under peak times under the banner of network safety. It comming,...just like water saving, the old days are going to end soon.

In the not to distant future the use of controled loads such as Air Con wil come at a price on these days. Both the elec distribution and retail companies buy electricty at varying prices every 30min according to demand..I had a quick look at the demand price per MWh yesterday and it went though the roof. However the real issue was that one of the interstate suppies used for meet peak demand requirements was taken off line due to the bushfires...

can anyone say ENRON?

Windsor was good :)

And so was my work (Collins St)

aircon all round :yes:

Yes it was... Footscray power came back at 6pm and my work at Collins st was as cold as ice, i was wearing a jacket in my office. LoL

In the not to distant future the use of controled loads such as Air Con wil come at a price on these days. Both the elec distribution and retail companies buy electricty at varying prices every 30min according to demand..I had a quick look at the demand price per MWh yesterday and it went though the roof. However the real issue was that one of the interstate suppies used for meet peak demand requirements was taken off line due to the bushfires...

So what can u expect in the future?

Currently u will be on a fixed tariff setup either flat rate or peak off/peak for fixed times during the day. The new systems to be deployed by 2008 will allow more felxability and in reality help these companies make you, the customer, pay for these peak demand times by varying tarriff rates for controlled load especially...in fact you the customer will probably have visability of this and depending on what u signed up for, might even have ur load shed automatically in these situtaions.

In additiont he distribution companies in your area i.e. AGL, SPAusnet, Cipower/POwercore will have the ability to shed you power and esp. controlled loads such as air con remotely under peak times under the banner of network safety. It comming,...just like water saving, the old days are going to end soon.

I work for Powecor and this is the first I've heard of it? 2008 is very soon to get a system like that underway. Maybe only in small areas as a trial. In the late 80's and 90's there were a few zone substations around melboure that had UFA which stands for Urban Feeder Automation where they could control hot water services coming on and off by sending high frequency signals into the powerlines. Anyway, it's all pretty much all been pulled out because it failed dismally. I think one of the problems with the system was that distribution transformers would trap the high frequencies if there were Delta windings. If it's a direct line with no circuit breakers and windings then it's ok like PLC (Powerline carrier) which is used in SPAusnets transmission lines for intertripping. It works very effectively but on the lower scale for every house it's a big job! At the moment I think load shedding will remain how it is and how it worked yesterday, just rotating who is off for how long to reduce the load.

The problem yesterday is that the 330kV feed from the Snowy scheme (NSW) between Dederang Terminal Station and South Morang Terminal Station tripped off because of the fires and they had to wait until CFA would allow them to fix it. Apparently we get up to 30% of our power from snowy on heavily loaded days like yesterday and with that gone... we had to load shed! I do agree that it will probably happen but I don't think it will be that soon.

I thought the power was bought in 5 min intervals?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
×
×
  • Create New...