Jump to content
SAU Community

Recommended Posts

I only got one reply in the styling section which wasn't much help (no offence) so i thought i would post my question here

I'm gonna get some new rims, finally, I'm just looking for some recommendations, i want them to be a grey shadow colour as i think that would suit the two tone colour more then a chrome silver would. I'm more into the performance side of the car so what size tyres rims would suit for better take off/power to the ground.

I'm also thinking a deep dish might look nice

thanks for any help

btw, this is the offset i got of maggala.com

front - 18X8.0 +33 225/40 R18

rear - 18X9.0 +39 255/35 R18

post-28231-1168940299.jpg

Edited by Hulk1010

That wheel looks nice - I've found with my 33 that you need the biggest diameter, width and dish you can fit to make them look good. 33's are a hard car to get the right rims for - I think I stuffed up when I bought mine.

Here's a link to tempe tyres packages.

http://www.tempetyres.com.au/products.asp?...2FSilver%2FGold

post-12959-1169281807.jpg

Edited by gtst25

Firstly, what is your budget? Are you after something local or jap?

My advice is to look at as many pics as you can from google...or try this site here...

http://www.hkskylineclub.com/images/Galler...GTS/page_01.htm

http://www.hkskylineclub.com/index1.htm

Click on the Members and Owners Ride links..plenty of examples there...

Wheels are like women and shoes....you never know how good or bad they look until you try them on ;)

I only got one reply in the styling section which wasn't much help (no offence) so i thought i would post my question here

I'm gonna get some new rims, finally, I'm just looking for some recommendations, i want them to be a grey shadow colour as i think that would suit the two tone colour more then a chrome silver would. I'm more into the performance side of the car so what size tyres rims would suit for better take off/power to the ground.

I'm also thinking a deep dish might look nice

thanks for any help

btw, this is the offset i got of maggala.com

front - 18X8.0 +33 225/40 R18

rear - 18X9.0 +39 255/35 R18

Dish :/

Edited by CCCP

33 look hot with dish! and your right the sure do need a big size to fill them out to look just right, heres a pic of my friends 33 with 18s with dish looks hot.

i reckon volk gt-n's look tuff as but cost a pretty penny!

post-16065-1169363016.jpg

post-16065-1169363032.jpg

thanks for the replys so far, another question i have is, do the front rims have to be a different width size to the back rims, I see many people have a one inch difference between the back and front rims, does it matter for example if the fronts are the same as the rears, 8 inch front and back?

thanks for the replys so far, another question i have is, do the front rims have to be a different width size to the back rims, I see many people have a one inch difference between the back and front rims, does it matter for example if the fronts are the same as the rears, 8 inch front and back?

Your car came factory with all four wheels of same width...yes its fine. Staggered width is just a personal preference, being RWD cars, having wider wheels at the rear gives tht added traction and also looks cool :D

Your car came factory with all four wheels of same width...yes its fine. Staggered width is just a personal preference, being RWD cars, having wider wheels at the rear gives tht added traction and also looks cool :P

Also means you cant rotate your wheels for maximum tyre life :happy:

what do u guys think of these?

http://www.tempetyres.com.au/products_clos...amp;part_no=298

also it says - (Deep Dish on Rear) - does this mean the fronts aren't deep dish?

what do u guys think of these?

http://www.tempetyres.com.au/products_clos...amp;part_no=298

also it says - (Deep Dish on Rear) - does this mean the fronts aren't deep dish?

Deep dish pack means the rears are wider and allow for more dish. The fronts still have a bit but I wouldn't go calling it deep dish :thumbsup:

You kidding anything higher than 18 is too big? even 19's sometimes look small on a 33!

post-24227-1170042587.jpg

These are the rims i got on mine, 19's 8.5 all round and i think they look a pretty good size. IMO 18's dont fill the arches enough, and with 19's you can still lower the car enough so it doesnt look like a 4WD.

You kidding anything higher than 18 is too big? even 19's sometimes look small on a 33!

post-24227-1170042587.jpg

These are the rims i got on mine, 19's 8.5 all round and i think they look a pretty good size. IMO 18's dont fill the arches enough, and with 19's you can still lower the car enough so it doesnt look like a 4WD.

If your outer rolling diameter has increased, did you then re-calibrate the speedo?

they are Envy MK II's, cost about $1200 for the rims.

I just put them on and got a wheel alignment, no speedo re-calibration, but ive noticed barely any change in my speed vs speedo. It would only been very little, probably insignificant anyway.

i like those mkll, but i found out they only come in a 18 x 8 in the gunmetal look ( i don't wanna go bigger then 18's) , i'm comming across a few different rims i like but they all seem to be 18X8. so i might just go with the 18X8 for all four wheels

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all, not sure how active SAU is anymore but will ask away anyways. Just wanted to get some experience on the 2008 model GTR CBA model.  I've hit that age in my life (43) where I'm like fk it time to get my dream (midlife crisis) car. Looking at importing one in and seeing if these can be reliable if the main flaws are fixed up. Plan is to keep money aside to do the following straight off the bat to future proof it: * install a stage 1 rebuilt trans with all new bits and pieces.  * install a new Bellhousing from the later model GTRs. Or potentially an upgraded stronger version like MAD or ATR. Besides the above two things and typical maintenance items anything else you'd recommend doing.   Been speaking to a few people and the engine on these are very reliable apparently. But keen on the view of the community here. Hoping to find a nice grade 4.5 with low mileage in Grey. I'd go black but swirls too easy. Look forward to your responses and feedback. Cheers    
    • Do Alan and Keith work on Skylines now? I remember buying stuff from them when I owned my Ralliart Lancer a few moons ago. Definitely genuine guys and be excellent if they dealt with the skyline platform as well.
    • Hey all, I'm Gaston from Sydney's West.  I was a member on here when I was a younger lad and owned a mint R33 GTS-T. Ended up selling it and getting married having kids (yadda yadda) we all know how the story goes. Now I'm back with the intention to get my midlife crisis (dream) car ... a R35 GTR.  You'll see me about asking questions and searching the forums. Good to be back and can't wait to get back an Import again.
    • I have to put something here in order to post the photos. From what I could gather there's more enthusiasm for modified cars now than there has been for years. There were probably more younger people there than older (me included lol) which was a good sign.  It did seem like the record least amount of representation of the 90's era hero cars on display though. Like maybe one or two examples of S-chassis Nissans, and maybe 3 or 4 R-chassis. By comparison there were a lot of Civics from that era but in all there were about 10 - 12 EG/EK Civic Type R.  Euro exotics are always there in large numbers, led by Liberty Walk...... say what you will about kids using markers to scribble on a Ferrari F40, it did seem like a stunt to infuriate Ferrari enthusiasts, or Ferrari itself. I wonder if there's something more to it. Either way LBWK have done some heinous things to a Lamborghini Miura this time. They should stop now.
    • Engines and drivelines are not war stoppers for me mate, busted arse bodies and un-obtainium parts and panels are though Both cheap Brumbies I looked at had trashed tubs and a fair bit of rust
×
×
  • Create New...