Jump to content
SAU Community

Key For R34

TokyoTaxi
 Share

Recommended Posts

TokyoTaxi Veteran

TokyoTaxi

Posted
Posted

Hey all. Just wondering if anyone has purchased a spare key for their R34 ?

I want a spare one so I went to Mister Minute and they don't stock a suitable key ( even just the blade without the central locking buttons ). I've been to almost every key place I can think of and no joy so I went to Nissan and guess how much they quoted me for a "KEY".............

$422.35 :yes::(

OK, so it has the central locking BS in it but it doesn't even have an immobiliser built in and yet they want $422.35 for a fcuking uncut key ?!?! For that kind of money the key should be able to perform oral sex on me ( and damn well too )

And yes, R34 keys are different to R33's, R32's etc etc.

So, are there any realistic options available that you guys know of ?

Link to comment
https://www.sau.com.au/forums/topic/152063-key-for-r34/
Share on other sites
HolyEvil Community Regular

HolyEvil

Posted
Posted (edited)

I got a spare key cut at a keysmith at Chatswood Westfield basement near to the coles or woolies. Just tell them that there's no special chip or anything. Cost me 5-8 bucks if i rem correctly.

edit- for $422.35 they better take it in all 3 places and bring their hot twin sister along..

Edited by HolyEvil
Link to comment
https://www.sau.com.au/forums/topic/152063-key-for-r34/#findComment-2838123
Share on other sites
GMan Proficient

GMan

Posted
Posted
  HolyEvil said:
edit- for $422.35 they better take it in all 3 places and bring their hot twin sister along..

hahahahahahahahaha!!!! Nicely said..

What does those keys look like anyways..is it different from which store you get it cut from? is there any special brands or marks on them or jus plain? pic anyone?

Link to comment
https://www.sau.com.au/forums/topic/152063-key-for-r34/#findComment-2838952
Share on other sites
HolyEvil Community Regular

HolyEvil

Posted
Posted
  GMan said:
hahahahahahahahaha!!!! Nicely said..

What does those keys look like anyways..is it different from which store you get it cut from? is there any special brands or marks on them or jus plain? pic anyone?

not sure if it's different from store to store cuz I onlt went to 1 store. On the key it says 'Edmond's" I think it's a generic key thing?

here's a picture of it, don't look good, but would look like Keira Knightly to me if I ever loose my original key.

cheers

post-32794-1169362625.jpg

Link to comment
https://www.sau.com.au/forums/topic/152063-key-for-r34/#findComment-2840017
Share on other sites
Sheng Grand Master

Sheng

Posted
Posted
  FAT34 said:
Hey all. Just wondering if anyone has purchased a spare key for their R34 ?

I want a spare one so I went to Mister Minute and they don't stock a suitable key ( even just the blade without the central locking buttons ). I've been to almost every key place I can think of and no joy so I went to Nissan and guess how much they quoted me for a "KEY".............

$422.35 :):stupid:

OK, so it has the central locking BS in it but it doesn't even have an immobiliser built in and yet they want $422.35 for a fcuking uncut key ?!?! For that kind of money the key should be able to perform oral sex on me ( and damn well too )

And yes, R34 keys are different to R33's, R32's etc etc.

So, are there any realistic options available that you guys know of ?

yeah they quoted me with the similar price, then i decided just to get a spare key for the doors n stuff, then guess what, it also turns my engine on :P

just a spare door key, it does the job :P

Link to comment
https://www.sau.com.au/forums/topic/152063-key-for-r34/#findComment-2840740
Share on other sites
  • 3 years later...
G-DADDY Newbie

G-DADDY

Posted
Posted

I hear what your saying about the price of the key. I was quoted between $550 to $400 for the key unit. One option is to order the key blank blade from Alibaba.com. Ask nissan for the electrical circuit board inside the key for the central locking (cost $130). Encode it (instruction on another thread).

It's a cheaper option and it works.

Link to comment
https://www.sau.com.au/forums/topic/152063-key-for-r34/#findComment-5256419
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

only time you need a geniuine key in an R34 is if you have a GTR. the rest fo tehm work on a copy. if you want the remote entry key I can get them cheaper but they are still expensive.

Link to comment
https://www.sau.com.au/forums/topic/152063-key-for-r34/#findComment-5262489
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • Duncan
      1992 R32 GT-R Race Car

      By Duncan · Posted

      heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
    • Duncan
      Oil pan for RB25DET NEO Stagea "version"

      By Duncan · Posted

      meh, it was a good video, clear about the issue and how he dealt with it. A bit heavy on the RTV and very brave to put an RB in anything without rebuilding it first, but otherwise I thought it was good Dose, I'm not sure that having the pickup forward is a big issue; yes of course the oil could shift under brakes but the sump should never be empty enough for that to be a problem (unless you also have a higher volume oil pump, and that oil can't return from the head to the sump quickly enough)
    • MBS206
      Starting again

      By MBS206 · Posted

      I can donate $100 to your upgrade fund. So long as you can donate the IC7 my way....
    • MBS206
      Starting again

      By MBS206 · Posted

      I'd love a Haltech ECU, and Haltech 10 dash. Was having a chat with Rob and Andy @ Haltech when Rob put one in his MR2. First one I'm kind of interested in too, as you can dim it RIGHT down. Andy was saying bright dashes is one of his peeves too!
×
×
  • Create New...