Jump to content
SAU Community

Recommended Posts

My r33 gtst has a slight backfire when i back off the gas followed by a gargle, all coming from the exhaust. I have only had the car a week and it has always done it since then but i have put some injector cleaner in the fuel and it seems to now be worse. Is this normal for a skyline to be doing this?

Link to comment
https://www.sau.com.au/forums/topic/15218-backfiring/
Share on other sites

I haven't seen a Skyline that doesn't do it :D

Edit: Oh, if it blows lots of black smoke, this too is normal and nothing to worry about. I met someone who drives a turbo Audi and he thought that all Skyline engines were in sh*thouse condition because of all the smoke he sees them blow, I had to educate him that it was just unburnt fuel because of running hella rich.

Link to comment
https://www.sau.com.au/forums/topic/15218-backfiring/#findComment-313371
Share on other sites

Hehe, speaking of scaring pedestrians, I once scared the shite out of some bogun fat chick in my old XY Falcon with worked 302 Windsor and no mufflers. A bunch of boguns decided to meander across the carpark in front of me doing 5kph. It wasn't a pedestrian crossing, so I got a bit pissed off especially since they were in single file and walking slowly.

When the last one (fat chick) was right in the middle of my car, I floored the accelerator and slipped the clutch a little to inch forwards about 5 cm. She just about shit her pants :O

Don't think I can get the same effect happening again with the 'line :P Well, maybe if I moved forwards 1 metre instead of 5cm :P

Link to comment
https://www.sau.com.au/forums/topic/15218-backfiring/#findComment-313626
Share on other sites

  • 5 weeks later...

I drive a Turbo Audi - but im not that guy :P

'line engines are pretty awesome actually, i almost got one, but they got too common.

I know of one Audi A4 Turbo Quattro that blow a lot of smoke - but he has over 220kw at all four. So its a bit extreme. PS. watch out for him. :P

Link to comment
https://www.sau.com.au/forums/topic/15218-backfiring/#findComment-361693
Share on other sites

Does it sound angry? Yes? Then good! Mine consistanly backfires in 1st, 2nd and 3rd gear changes and often if i back off from higher up in the rev rang,Lovin it. The rumble under compression is a nice sound also. It can be controlled with longer slower gear shifts.I must admit a good Ffowing exhaust and rich fuel mixture increases this, and no cat! Oh did I say no cat? Thats illegal isn't it?? LOL

You don't want to much though as that can be cop bait...

RJB.

Link to comment
https://www.sau.com.au/forums/topic/15218-backfiring/#findComment-361879
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Should be close enough. Noting that 88Nm is equivalent to 2-3 ugga duggas or one Oof. You have to use Oof on tie rods because you can't get an ugga dugga on there.
    • Cant find a torque spec in the R32 gtr manual  But there is one in the silvia manual Not sure if it's the same
    • And make sure the belts are tightened appropriately too.
    • They care about emissions, and cost the most. Save weight where possible, and make manufacturing easier. Less material also let's the engine transfer heat to water quicker, and bring the engine up to temp quicker, better for emissions and getting them past their warranty period.
    • I was under the impression the reason why OEMs are going with solutions like relatively thin "right-sized" cylinder walls with technologies like PTWA and open deck is because they care a lot about whatever marginal knock margin benefits they get from that vs the structural rigidity benefits of a closed deck block and thicker cylinder walls. I also see some weird stuff like plastic inserts in the water jacket around the cylinders to try and equalize cylinder wall temperatures. re: the PRP blocks and heads at the end of the day it's hard to know what is and isn't going to work there, just have to see what the initial buyers say about it.
×
×
  • Create New...