Jump to content
SAU Community

Recommended Posts

Just ran a 12.9 on Sunday at AIR. Pretty average 60 foot of 2.247, was getting mega axle tramp.

:rave:

Car: R33 Gtst

Mods:

HKS exhuast, 3" dump and cat-in pipe

Greddy FMIC (Model- 28c)

Apexi Power FC

Apexi filter which has a cold air feed and partition

Oil/Air seperator ( single inlet )

HKS twin plate solid centre clutch

Heat wrapped Turbo dump to cat, Intercooler outlet to throttle body.

Turbo is totaly stock

Bocsh Motorsport fuel pump

BP ultima 98 with Wynns Octane booster.

Motul 6100 engine oil

Last dynoed 218rwkw

Estimated 220-230rwkw on the day.

Next Mods

HKS adjustable cam gear

high profile rear tyres to get the 60 foot time down

- hoping for 12.6-12.7 :burnout:

Link to comment
https://www.sau.com.au/forums/topic/15265-129-11149-stock-turbo-gtst-33/
Share on other sites

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

I removed the exhaust at the Cat and increased my timing by 2 degrees because of the octane booster advantage. Also modified the front bar for better flow through the cooler and heat wrapped the exhaust the day before, which made noticable difference to intake temps.

My best run however was with the exhuast on.

Thats some impressive power your making out of those relatively basic mods. How long ago did you install the PowerFC, early on or later on?

14.7psi is abit high on the stock turbo, I get told that 12-13psi is a risk on warm-ish nights.

I think if you can get your traction problems sorted (thankgod someone else gets axle tramp, was beginning to think i was the only 1) then you should see a 12.7-12.8 easily.

oh i get axle tramp alright.. although i am not quite sure exactly what it feels like so not positive! If its the feeling where you're tyres aren't quite squealing and your ass end feels like its bouncing up and down while the wheels are spinning then i get axle tramp big time?? so you are not alone.

As far as i can tell the best way to fix it would be get rear suspension as hard as rocks or put 100kg in the boot. I have pineapples as well, reduces it a bit but not enough as i would have liked.

Originally posted by predator666

If its the feeling where you're tyres aren't quite squealing and your ass end feels like its bouncing up and down while the wheels are spinning then i get axle tramp big time??

Thats it alright. I think my car launches harder with 2 people in the back then what it does with just myself. The extra weight most deffinetly helps. I've got 2mth old Koni Shocks and 4mth old Pineapples, my last bet is new Dunlop FM901's to replace the Falken ZE502's. If they dont fix the problem (or dramatically improve it) im not sure what else can be tried. I just wish somebody could give a reason as to why it happens (too hard, too soft, wrong setup, etc).

What an awesome result - congrats:) Hope you got another turbo waiting nearby :P

Originally posted by predator666

oh i get axle tramp alright.. although i am not quite sure exactly what it feels like so not positive! If its the feeling where you're tyres aren't quite squealing and your ass end feels like its bouncing up and down while the wheels are spinning then i get axle tramp big time?? so you are not alone.

As far as i can tell the best way to fix it would be get rear suspension as hard as rocks or put 100kg in the boot. I have pineapples as well, reduces it a bit but not enough as i would have liked.

Have you thought about going for a solid alloy spacer in place of the front pineapples - I have heard it can work wonders, just locks the whole thing up.

yer..same prob.. I've got the Falken's as well. It's just that the skyline is not too balanced.. weight distribution could be a lot better for dragging if it was more even. A full whiteline kit would do wonders if you want to spend the money.

I can probably do a bit better and get a mid-13 but not much better i don't think with my current setup and a few tweaks.

Hmmm.. I've only got pineapples on the ass end actually as i thought that was mainly where it would be needed in a RWD. Would I get gains from having them on the front as well?

I was running 17" 35 series tyres with 20psi. The track was ultra sticky. First run I tryed with a burnout and ran a 13.6. After that i decided to skip the tyre smoking and drive around the water, ran constant 13.1's and the single 12.9 after that.

benm: I installed the FC over eight months ago.

111mph! what the!

I think I'll get a 12.9 soon but, 111mph is damn fast and indicates alot of horsepower.

Go the whales!

I think that puts the R32 boys in their place, they need hiflows toget those sort of times :P

What was the 60ft? (I'm guessing a 2.1)

Looks like AIR got its shit together this time! The warmer day time track temp' would certainly help. It was faaar from ultra sticky last s/meet :P.

Damn I wished I'd gone now :P Nightcrawler set a PB this meet too.

Originally posted by rev210

111mph! what the!

I think I'll get a 12.9 soon but, 111mph is damn fast and indicates alot of horsepower.

Dave,

111+mph is more than some people would have you believe the stock turbo & injectors can manage!

That little stock turbo is a freak for sure :P It provides minimal lag, hence the quick 1/4 even with a so-so 60ft, yet has big top end to run 111+.

Matt,

be very careful about what you upgrade your turbo with. You could go backwards!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...