Jump to content
SAU Community

Recommended Posts

spotted a black 32 GTR the other morning on the brooker, black, factory wheels new rego plates and a HKS super dragger exhaust, looked clean and tidy!

Ah yeh cheers, that would be me. In the afternoon I assume?

And I spotto'd a mostly skyline cruise parked on the side of the road in oyster cove about 12:30 at night on friday, was anyone from here part of that?

Edited by gfro
  • 3 weeks later...
  • 2 weeks later...

spotted a m35 in Launceston yesterday on the corner of St John and William st, I only just got a very short look at it as i was to busy watching the 180 in front. I am guessing it is rickzx new stagea.

Hope to see more of it around the place

spotted a m35 in Launceston yesterday on the corner of St John and William st, I only just got a very short look at it as i was to busy watching the 180 in front. I am guessing it is rickzx new stagea.

Hope to see more of it around the place

i saw a silver m35 cruising through newnham/mowbray

i've seen it a few times now, looks pretty nice

Spotted a white r34 with black bonnet damaged under the overpass that is just before the turnoff for Harvey Norman in Launceston this morning. Tail lights appeared to be popped out, but couldnt see the passenger side for damage.

Also spotted at the same spot was a red car with what looked like a badly dented drivers side.

Anyone know what the go with that one is? :|

spotted. my car with no engine and gear box.

spotted rb30DET being built.

spotted adjustable rear arms

spotted custom differential now off run in

spotted my girlfriend offering to pay for my dome top pistons

spotted useless weight adding parts in wheely bin lol

;)

  • 3 weeks later...
spotted, just about every 32 GTR in the state at baskeville today, great turn out...

oooooooooo and poor old Funz's GTSt keeping it's self warm with a small under bonnet fire, at the side of the track :)

turns out one of the braided lines split on the starter motor so oil pissed all over it, then caught fire and melted through clutch line and that kept going lol.. from what we can tell engine is fine, just gotta fix burnt wiring and replace what ever hoses/lines need replacing . hopefully done before domain HC!

turns out one of the braided lines split on the starter motor so oil pissed all over it, then caught fire and melted through clutch line and that kept going lol.. from what we can tell engine is fine, just gotta fix burnt wiring and replace what ever hoses/lines need replacing . hopefully done before domain HC!

if there's anything i can do to help, just let me know old boy..

spotted, just about every 32 GTR in the state at baskeville today, great turn out...

oooooooooo and poor old Funz's GTSt keeping it's self warm with a small under bonnet fire, at the side of the track :worship:

Yeh was quite a turn out for the 32 gtr's. Mine was the black one with out the stickers. How many of the other fella's running at basky are on the forum?

black 32 gtr- me :D

other black 32 gtr - ?

white 32 gtr - ?

gunmetal 32 gtr - ?

blue 32 gtr - ?

Edited by gfro

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • does anyone know tie rod torque setting and anti roll bar for r34? Is there a workshop which shows various components torque setting?
    • Hi    have purchased pair of eibach wheel spacer as I couldn’t fit set of wheels I bought for my car due to it catching caliper.   I know I need to cut the bolts on my discs so they sit flush with the nut supplied but the nut doesn’t sit all the way into the groove meaning wheel would not directly fit onto the spacer rather the nuts. Any thoughts?   See pic   https://ibb.co/VJK5w5G
    • Nah. There's not shit tonnes of pressure in there. Just drill with a 1.5mm drill or something equally tiny. When the drill goes all the way through thee gas will start to come out, but with such tiny path through the flutes of the drill bit, it won't be at all dangerous. You can be as paranoid as you like from then on. I'd just pull the drill out while keeping my face out of the line of fire. But then, I spend half my time looking into pressurised furnaces. So my risk acceptance is somewhat higher than most!
    • Been needing a new clutch for a while, but holding off because of life tingz and adulting. But... Being of Asian descent, I can't pass on a good sale, especially everyone else is selling it for $2k+ (JJR has it for $1799). Really on the fence on this one, because the unsprung version of this is $1281 via Shitbox (Sparesbox) and the sprung version is quite a bit more (no idea why Shitbox doesn't offer them). Ending up just sending it and getting the twin sprung organic. Mainly because I wanted the car to be nice to drive and didn't want to make it more of a shitbox than it already is.    
    • It was the pressure I was worried about. @GTSBoy does drilling them pose any problems?
×
×
  • Create New...