Jump to content
SAU Community

Recommended Posts

This is going mildly off topic, and I realise that this isn't going ahead but I spent a couple of minutes properly aligning, resizing and adding to one of Autumn33's initial designs (see attached) so I thought I'd post it up. If we were actually going ahead with this at any point it'd probably be worth putting it out as a competition, as I'm sure there's a heap of people/designers who would want to have a go at this that don't check the forums on an hourly basis :P

I'm interested as to why it's a no go though? Is it down to copyright and whatnot?

Jay

post-67169-0-36194000-1303161372_thumb.png

If they don't end up getting made i'm just gonna write SAU TAS in window paint on my rear window. haha, not really. but still, it's a good idea to get them. Which skyline do you drive toffy? i try to remember most cars that come through,

Ok the run down on stickers is this: there is no drama organising SAU stickers for those that want them but obviously we cant just go and make up another design and include what ever it is just suit the Tassie section.

Personally a couple of the designs I didn't mind but the forum is SAU = SKYLINES AUSTRALIA and if you want to help support the forum then adding TASMANIA into the equation (again IMO) is a little silly and could/can cause confusion.

Having said that I already have some WWW.SKYLINESAUSTRALIA.COM URL stickers in black & white (pretty sure Funz still has one on his car???) and still have the design for the official SAU stickers kicking around somewhere (these have to be printer rather than vinyl cut so naturally more expensive) so I'll leave it upto all those that would like a sticker.

Do you want the standard URL sticker or the printed SAU+logo sticker???

Let me know ASAP and I'll get onto it :thumbsup:

Cheers Ben

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...