Jump to content
SAU Community

Compression Test

Richo

By Richo,
in South Australia

 Share

Recommended Posts

Oosh Veteran

Oosh

Posted
Posted

Best disconnect the injector loom, no point spraying fuel about for no good reason, what else could go wrong?

Well you could drop a bolt down the spark plug hole, but that's easy fixed with a magnetic pick, everyone who doesn't own one, buy it now, they cost nothing and you'll wonder how you survived without.

The above leads to this, make sure you clean out any crap around the plugs before removing them, a good blow (teehee) should sort it.

Ummm... try not to cross-thread any bolts (incl. sparkies) when putting them it back in, always tighten with your figures first, then the ratchet.

Yes, rockers stay, only the valley cover needs to be off, the cross pipes can even stay if you have some extensions and uni-joints, it's fiddly but has worked the last few times I've changed spark-plugs and/or coils.

Mike_ Rising Star

Mike_

Posted
Posted (edited)

Yeah thats right. Before you take off the coilpacks and again before you take out the spark plugs, make sure there is nothing in or around them that might fall into the engine. Generally people do this with an air compressor to be sure.

Also dont let anything into the air intake when you take off the crossover. Generally a very clean rag or cloth over or pushed into the intake piping (both exposed ends, and the ends of the crossover if you want to be sure)

In all honesty though, it sounds like it won't matter if there is something very wrong with your engine!

oh also take note of how tight the spark plugs are when you remove them. Don't do them up tighter than this when you put them back!

Also, you must not have been in your car yesterday if it's off the road. what were you driving? Did you see the security guard yelling at me for giving it a bit? :yes: I was running late!! haha

Edited by Mike_
Richo Mentor

Richo

Posted
  • Author
Posted

Thanks guys. Will keep that in mind for tonight.

No, I wasnt driving my car yesterday, I was on the GF's car, I did notice the guy there looking at you, but I thought he was just admiring the car :) didn't hear him go off at you, I must have been just getting in the carpark.

Gotta love giving it some in that carpark, setting alarmas up as you go, specially if you have a screamer pipe, not that I do :ph34r: ...ever. I mean that would be stupid. haha

Anyway, ill se how we go tonight with this guy, ill let you guys know the results.

Richo Mentor

Richo

Posted
  • Author
Posted

Ok here are the results! Have to say big thanks to Dangerman4, went out of his way to help me out, thanks mate.

1- 152

2- 150

3- 151

4- 152

5- 150

6- 149

So as you can see the results are quite good, and im pretty happy to know there is nothing wrong with the engine.

A Catch Can is on the way and also will be looking for a new turbo, cause we reckon thats the culprit.

Cheers

Ric

dangerman4 Mentor

dangerman4

Posted
Posted

im fairly sure its the turbo.

theres no blowby that i could find and obviously the comp test lookes good.

i cant think of any other way to get a cup full of oil in your intercooler.

the turbo was only installed recently, and may have been sitting around for several years without use.

give it a hard time and bam goes the compressor oil ring.

thats what my moneys on anyway.

and cheers for the beers Ric

Richo Mentor

Richo

Posted
  • Author
Posted

Thanks guys, oil level its fine. Im paranoid now and checking it everyday to make sure its all good.

After installing the catch can, ill be able to rule out the rest and blame the turbo. Damn im going to have to buy a bigger one :)

How does a GT2871R sound for an RB20? laggy or not?

Cheers

Ric

Deluxe Grand Master

Deluxe

Posted
Posted

A mate of mine is selling his turbo off his Cefiro(RB20 obviously) I'm about to post it up for sale for him, below i have copied and pasted what he sent to me in a message:

HKS 25 30, external gate (plumb back integral dump), Intake pipe, Dump pipe, all lines, clamps, nuts etc.

Bolt on rB20 unsure bout 25

$1600 o.n.o

Richo Mentor

Richo

Posted
  • Author
Posted

Very interested, just how old is the turbo, did he buy it new? why is he selling? ill PM you in a minute.

Cubes, im looking at around 220rwkw on an everyday basis (say 15psi) , and maybe 235rwkw max when extra grunt is needed.

Cheers

Ric

A mate of mine is selling his turbo off his Cefiro(RB20 obviously) I'm about to post it up for sale for him, below i have copied and pasted what he sent to me in a message:

HKS 25 30, external gate (plumb back integral dump), Intake pipe, Dump pipe, all lines, clamps, nuts etc.

Bolt on rB20 unsure bout 25

$1600 o.n.o

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      MAJOR FUEL ISSUES 25det neo r32

      By GTSBoy · Posted

      There's nothing that some paddle pop sticks and extra cable ties can't fix.
    • QB6SAGR
      RB20 in need of modest love injection

      By QB6SAGR · Posted

      Hey guys, so Golebys has good prices on Bosch injectors, and also sell an adaptor to go from 1/2 length injector to standard with the Nissan 10.5mm top seal.  Does anyone know if that adaptor is to suit the 14mm or 11mm injector tops?  And re. The bottom seal, to suit my standard RB20 intake, would I be right in saying I can just slip the 14mm square section O ring over the bottom of the new injector and done? Thanks in advance guy, Cheers, Rowdy
    • kevboost7
      Magnetic Drain Plug Snapped in Half

      By kevboost7 · Posted

      F my life. I was changing the oil on my R32 GTR today as usual and ran into a bit of a snag. I drained the oil out and was getting ready to finish the job by tightening the drain plug, however The stupid magnetic oil drain plug snapped in half, right at the magnet part. After about an hour of trying to remove it, I used a drill bit, which unfortunately pushed the magnet all the way into the pan, and just leaving the hollow threaded part of the bolt remaining. I was able to remove the hollow portion of the bolt from the oil pan with some pliers but the magnet is still in there.  So, the question is, should I drop the oil pan to get the magnet piece out, or is it okay to leave it in there? I really dont want to drop the pan, i'm about to go nuts.  PSA: Do NOT buy a BLOX magnetic drain plug. This is the one i had.    https://bloxracing.com/products/magnetic-oil-drain-plug-m12x1-25mm?variant=37131252859052&country=US&currency=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&gad_source=1&gclid=CjwKCAjw47i_BhBTEiwAaJfPpgti1D2JwO7TDuMpXuqeQPCuIQSAfwxpWQH5rF9MD7sm5SCZDWLR_RoC_YoQAvD_BwE    
    • 25debt
      MAJOR FUEL ISSUES 25det neo r32

      By 25debt · Posted

      I actually have an aftermarket hanger, the detschwerks x1 hanger, but my dw420 has never really sat in it correctly, good to know I can just modify it a bit to suit. Yeah cheers man will definitely have a play with it and hope it solves my dramas.
    • Rezz
      r34 gtt tall spoiler

      By Rezz · Posted

      Seriously though, it's the Shaft Autoservice high mount rear spoiler: https://az-style.shop/items/5ffaad5a72eb464137a6edb1
×
×
  • Create New...